Advanced SearchSearch Tips
Development of Reinforcement Side Outer Using TWB Hot Stamping Process
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of Welding and Joining
  • Volume 33, Issue 6,  2015, pp.36-41
  • Publisher : The Korean Welding and Joining Society
  • DOI : 10.5781/JWJ.2015.33.6.36
 Title & Authors
Development of Reinforcement Side Outer Using TWB Hot Stamping Process
Kim, Soyoun; Kong, Hoyoung;
  PDF(new window)
In the automotive industry, TWB hot stamping process is broadly adapted to reduce weight of the car and improve fuel efficiency. However, the process faces a problem of weakened strength of the welded zone after hot stamping process, due to the fact that Al-Si elements of the coating layer penetrating the welded zone. In this study, filler wires with high percentages of carbon and manganese is adapted during laser welding process to secure the strength of the fusion zone. In addition, wire feeding speed and laser welding speed are optimized by sample test.
Tailor welded blanks(TWB);Laser welding;Filler wire;Hot stamping;Side structure;Crash test;
 Cited by
겹치기 용접 후 핫프레스 포밍된 보론강 용접부의 부식성 평가,강민정;김철희;

Journal of Welding and Joining, 2017. vol.35. 5, pp.1-6 crossref(new window)
Taylan Altan, Hot-stamping boron-alloyed steels for automotive parts, Process method and uses, Stamping Journal, Part 1, (2006)

H. Karbasian and A.E. Tekkaya, A review on hotstamping, Journal of Mater. Proc. Technology, 210 (2010)

W. Ehling, L. Cretteur, A. Pic, R. Vierstraete and Q. Yin, Development of a laser decoating process for fully functional Al-Si coated press hardened steel laser welded blank solutions, Proceeding of the 5th Int. WLT- conf. on LIM, (2009)

M.S.Kwon, Y.G.Kim, M.B.Moon, J.P.Kong and C.Y.Kang, Development of the New Technology for TWB and Hot Stamping Hybrid Process, 6th International Conference on Tube Hydroforming, (2013)

F.Briand and O.Dubet, hybrid Arc/Laser-Welding Method for Aluminized Steel Parts Using Gammagenic Elements and a Gas Containing Less Than 10% of Nitrogen Or Oxygen, Patent, US 2013-0098878

Nippon Steel and Sumitomo Metal Corporation, Tailored Blank For Hot Stamping, Hot Stamped Member, and Methods For Manufacturing Same, Patent, US 2015-0043962

M.Hiroshk, G.Hiroki, M.Yasuo, Weldment Produced By Beam Welding, Patent, US 5968672

S.Erturk, M.Sester, M.Selig, P.Feuser and K.Roll, A Thermo-Mechanical-Metallurgical FE Approach for Simulation of Tailored Tempering, Hot Sheet Metal Forming of High-Performance Steel CHS2,2011

IIHS, Side Impact Crashworthiness Evaluation Crash Test Protocol, Version