JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of Various Factors on the Brazed Joint Properties in Al Brazing Technology
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of Welding and Joining
  • Volume 34, Issue 2,  2016, pp.30-35
  • Publisher : The Korean Welding and Joining Society
  • DOI : 10.5781/JWJ.2016.34.2.30
 Title & Authors
Effect of Various Factors on the Brazed Joint Properties in Al Brazing Technology
Sharma, Ashutosh; Lee, Seung Hyun; Ban, Hyung Oh; Shin, Young Sik; Jung, Jae-Pil;
  PDF(new window)
 Abstract
Last few decades have seen a rapid increase in the fabrication and characterization of Al alloys for automobiles, heat exchangers and aerospace industries. Aluminium alloys are popular because of their high specific strength, light weight, excellent wear and high oxidation resistance. The development of aluminium alloys in these applications makes their study and research of utmost importance. Brazing is applied to the aluminium alloys for joining various aluminium parts together in most of the industrial applications. Various parameters affect the joining process of these aluminium alloys. In this article, various types of processing parameters have been discussed, and special attention has been given to the category of aluminium brazing alloys. The article reviews on the various parameters that affect the brazing property in various scientific and technological applications.
 Keywords
Brazing;Joining;Automotive;Induction;Wettability;Intermetallic;
 Language
English
 Cited by
 References
1.
M.M. Schwartz, Brazing, 2nd ed., The Materials Information Society, ASM International, Ohio, USA, (2001)

2.
Brazing Manual, American Welding Society, Committee on Brazing and Soldering, Reinhold Publishing Corporation, New York, USA, (1963)

3.
D. Pritchard, Soldering, Brazing and Welding, Crowood Press, (2001)

4.
Kelly Ferjutz and Joseph R. Davis, ASM Handbook: Volume 6: Welding, Brazing, and Soldering 10th ed., ASM International, (1993)

5.
R. L. O'Brien, Welding Handbook: Welding Processes, 2, Welding Handbook, 8th ed., American Welding Society, (1991)

6.
R. A. Woods and I. B. Robinson, Flow of Aluminum Dip Brazing Filler Metals, Weld. J. Res. Suppl, 440s-445s, (1974)

7.
B. Daly, Basics of Brazing With Induction Heating, Weld. J., 52-54, (2013)

8.
H. Riedelsberger, Laser Brazing in The Automotive Industry, AWS Welding Show Atlanta, (2006)

9.
D. Steinmeir, Resistance Brazing Basics, Microjoining solutions, Arcadia, CA, (2003)

10.
Introduction to Furnace Brazing, Air Products, Air Products and Chemicals, Inc. (2001)

11.
The Brazing Guide by Induction Atmospheres, Industrial Park Circle, Rochester NY, (2009). (http://www.inductio-natmospheres.com/pdf/BrazingGuide.pdf)

12.
S.-H. Kee, S.-Y. Park, Y.-Ku Heo, J.-P. Jung and W.-J. Kim, Brazing Characteristics of $ZrO_2$ and Ti-6Al-4V Brazed Joints With Increasing Temperature, J. Kor.Acad. Prosthodont., 50 (2012), 169-175 (in Korean) crossref(new window)

13.
J. X. Zhang, R. S. Chandel and H. P. Seow, PTLP Joining of $Al_2O_3$-Stainless Steel 304 Using Ni-Cr Foil-The Microstructure Morphologies of Joint Interfaces, Mater. Manuf. Proc., 18(2) (2003), 181-193 crossref(new window)

14.
M. Singh, T. Ohji and R. Asthana, Ceramic Integration and Joining Technologies: From Macro to Nanoscale, American Ceramic Society, John Wiley and Sons, New Jersey, (2011)

15.
M. Singh, T.P. Shpargel, G.N. Morscher and R. Asthana, Active Metal Brazing and Characterization of Brazed Joints in Titanium to Carbon-Carbon Composites, Mat. Sci. Eng. A, 412 (1-2) (2005), 123-128 crossref(new window)

16.
J.-H. Kim and Y.-C. Yoo, Bonding of Alumina To Metals With Ag-Cu-Zr Brazing Alloy, J. Mat. Sci. Lett., 16 (1997), 1212-1215

17.
Y. M. He, J. Zhang, X. Wang and Y. Sun, Effect of Brazing Temperature on Microstructure and Mechanical Properties of $Si_3N_4$/$Si_3N_4$ joints brazed with Ag-Cu-Ti + Mo Composite Filler, J. Mater. Sci. 46 (2011), 2796-2804 crossref(new window)

18.
M.Yang, P. He and T. Lin, Effect of Brazing Conditions on Microstructure and Mechanical Properties of $Al_2O_3$/Ti-6Al-4V Alloy Joints Reinforced by TiB Whiskers, J. Mater. Sci. Technol., 29 (2013), 961-970

19.
W. Jiang, J. Gong and S.T. Tu, Effect of Brazing Temperature on Tensile Strength and Microstructure For A Stainless Steel Plate-Fin Structure, Mater. Des. 32 (2011), 736-742 crossref(new window)

20.
A. Sharma, M.H. Roh, D.H. Jung and J.P. Jung, Effect of $ZrO_2$ Nanoparticles on The Microstructure of Al-Si-Cu Filler For Low-temperature Al Brazing Applications, Metall. Mater. Trans. A, 47 (2016), 510-521 crossref(new window)

21.
S.H. Kee, Z. Xu, J.P. Jung and W.J. Kim, Joining of Ceramic and Metal Using Active Metal Brazing, J. Microelectron. Packag. Soc., 18(3) (2011), 1-7 (in Korean)

22.
Y. Liu, J. Hu, Y. Zhang, Z. Guo and Y. Yang, Joining of Zirconia and Ti-6Al-4V Using A Ti-Based Amorphous Filler, J. Mater. Sci. Technol., 27 (2011), 653-658 crossref(new window)

23.
A. Elrefaey and W. Tillmann, Interface Characteristics and Mechanical Properties of The Vacuum-Brazed Joint of Titanium-Steel Having A Silver-Based Brazing Alloy, Metall. Mater. Trans. A, 38 (2007), 956-2962 crossref(new window)

24.
H.-J. Kim, J. Y. Lee, K.-W. Paik, K.-W. Koh, J. Won, S. Choe, J. Lee, J.-T. Moon and Y.-J. Park, Effects of Cu/Al Intermetallic Compound (IMC) on Copper Wire and Aluminum Pad Bondability, IEEE Trans. Comp. Packag. Manuf., 26 (2003), 367-374

25.
S. Kogi, T. Kajiura, Y. Hanada and Y. Miyazawa, Wetting and Spreading Behavior of Molten Brazing Filler Metallic Alloys on Metallic Substrate, IOP Conf. Series: Mater. Sci. Eng., 61 (2014), 012017

26.
J. Li, Y. Liu, Y. Tan, Y. Li, L. Zhang, S. Wu and P. Jia, Effect of Tin Addition on Primary Silicon Recovery in Si-Al Melt During Solidification Refining of Silicon, J. Cryst. Growth, 371 (2013), 1-6 crossref(new window)

27.
S. Zor, M. Zeren, H. Ozkazan, and E. Karakulak, Effect of Titanium Addition on Corrosion Properties of Al-Si Eutectic Alloys, Prot. Met. Phys. Chem. Surf., 48, (2012), 568-571 crossref(new window)

28.
J. Aucote and D.W. Evans, Effects of Excess Silicon Addition on Ductility of Al-0.95%$Mg_2Si$ Alloy, Mat. Sci. Technol., 12 (1978), 57-63. crossref(new window)

29.
A.K. Dahle, K. Nogita, S.D. McDonald, C. Dinnis and L. Lu, Eutectic Modification and Microstructure Development in Al-Si Alloys, Mat. Sci. Eng. A, 413-414 (2005), 243-248 crossref(new window)

30.
I.J. Polmear, Light alloys From Traditional Alloys to Nanocrystals, 4th ed., Elsevier-Butterworth Heinemann, (2006)

31.
A. Sharma, Y.S. Shin and J.P. Jung, Influence of Various Additional Elements in Al Based Filler Alloys For Automotive and Brazing Industry, J. Welding and Joining, 33(5) (2015), 23-30 ( in Korean) crossref(new window)

32.
I. Calliari, E. Ramous, K. Brunelli and P. Favaron, Characterization of Vacuum Brazed Joints for Super-conducting Cavities, Microchim. Acta, 147(3) (2004), 141-146

33.
T. N. Ware, A. K. Dahle, S. Charles and M. J. Couper, Effect of Sr, Na, Ca & P on the Castability of Foundry Alloy A356.2, ASM Materials Solutions, 2002 Conference & Exposition, 2nd International Aluminium Casting Technology Symposium, Columbus, Ohio, USA, October 2002, 1-10

34.
Y. Wang and Y. Xiong, Effects of Beryllium in Al-Si-Mg-Ti Cast Alloy, Mat. Sci. Eng. A, 280 (2000), 124-127 crossref(new window)

35.
M. Jaradeh and T. Carlberg, Effect of Titanium Additions on the Microstructure of DC-Cast Aluminium Alloys, Mat. Sci. Eng. A, 413-414 (2005), 277-282 crossref(new window)

36.
M. O. Krasovskii1 and V. O. Lavrenko: Effect of Antimony and Bismuth on the Electrochemical Corrosion of the Cast Aluminium Silicon Alloys in 3% NaCl Solution, Powder Metall. Met. Ceram., 49 (2011), 716-721 crossref(new window)

37.
F. Stadler, H. Antrekowitschn, W. Fragner, H. Kaufmann, E.R. Pinatel and P.J. Uggowitzer, The Effect of Main Alloying Elements on the Physical Properties of Al-Si Foundry Alloys, Mat. Sci. Eng. A 560 (2013), 481-491 crossref(new window)

38.
D.H. Xiao, J.N. Wang, D.Y. Ding and H.L. Yang, Effect of Rare Earth Ce Addition on the Microstructure and Mechanical Properties of an Al-Cu-Mg-Ag Alloy, J. Alloy. Compd., 352 (2003), 84-88 crossref(new window)

39.
Tao Lu, Ye Pan, Ji-li Wu, Shi-wen Tao and Yu Chen, Effects of La Addition on the Microstructure and Tensile Properties of Al-Si-Cu-Mg Casting Alloys, Int. J. Min. Met. Mater., 22 (4), (2015), 405-410 crossref(new window)

40.
O. C. Paiva and M. A. Barbosa, Production, Bonding Strength and Electrochemical Behavior of Commercially Pure Ti/$Al_2O_3$ Brazed Joints, J. Mat. Sci., 32 (1997), 653-659 crossref(new window)

41.
R. S. Timsit and B. J. Janeway, A Novel Brazing Technique For Aluminum, Weld. J. Res. Suppl., 119s-128s, (1994)

42.
R. Andersson, T. Holm, S. Wiberg and A. Astrom, Furnace Atmospheres No. 4, Brazing of Metals, Special Edition, Linde Gas, Germany, 1-43

43.
E. Ganjeha, H. Sarkhoshb, M.E. Bajgholic, H. Khorsanda and M.H. Ghaffarid, Increasing Ti-6Al-4V Brazed Joint Strength Equal to the Base Metal by Ti and Zr Amorphous Filler Alloys, Mater. Charact., 71 (2012), 31-40 crossref(new window)

44.
X. Wu, H. Li, R. S. Chandel and H. P. Seow, Effect of Mechanical Vibration on TLP Brazing With BNi-2 Nickel-Based Filler Metal, J. Mater. Sci. Lett., 18 (1999), 1615-1617 crossref(new window)

45.
L. Huijie and F. Jicai, Vacuum Brazing TiAl-Based Alloy to 40Cr Steel Using Ag-Cu-Zn Filler Metal, J. Mater. Sci. Lett., 21 (2002) 9-10 crossref(new window)