Advanced SearchSearch Tips
Short Circuit Waveform Control Type SMAW Welding Power Source Development and Characteristic Evaluation
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of Welding and Joining
  • Volume 34, Issue 3,  2016, pp.40-46
  • Publisher : The Korean Welding and Joining Society
  • DOI : 10.5781/JWJ.2016.34.3.40
 Title & Authors
Short Circuit Waveform Control Type SMAW Welding Power Source Development and Characteristic Evaluation
Yang, Hyun-Min; Ryoo, Hoi-Soo; Hyun, Soong-Keun;
  PDF(new window)
The digital controlled SMA welding power source having the hot start current and short circuit waveform control was developed. The inverter power controller was used an analog circuit and the short circuit waveform controller was developed using a 8-bit MCU. For the evaluation of the developed SMA welding power source it were compared with a domestic welding power sources. Using the high titanium oxide type and low hydrogen type electrodes, the characteristics of hot start and short circuit was evaluated. Developed SMA welding power source shows good start performance. Also, arc stability and low current weldability were improved by the short circuit waveform control.
SMAW;Short circuit control;Low current weldability;Hot start;Waveform control;
 Cited by
단락제어에 따른 입향상진 피복아크 용접 특성에 관한 연구,이경훈;유회수;현승균;

Journal of Welding and Joining, 2017. vol.35. 5, pp.23-28 crossref(new window)
C.D. Yoo, S.J. Na, Arc Welding, Korean Welding and Joining Society (2011), 172 (in Korean)

The korean welding and joining society, I ferrous & non-ferrous metals, Manual of welding and joining, (2008), 204-208 (in Korean)

S.M. Cho, A study on the quantitative evaluation of arc stability in AC SMAW, Journal of KWJS, 16(4), (1998), 125-391 (in Korean)

U. Dilthey, Welding Technology 1, RWTH Aachen University

J.S. Kim, R.D. Hee and B.Y. Lee, The improvement of characteristic initial arc ignition in the SMAW, Proceedings of KWJ, 47 (2006), 69-71 (in Korean)

Van Adrichem, Metal Transfer, IIW DOC, (1969), 212-171-69

X. Xu, S. Liu and K.S. Bang, Comparison of metal transfer behavior in electrodes for shielded metal arc welding, International Journal of KWS, 4(2), (2004), 15-22

H.M. Yang, H.S Ryoo, The current control characteristic evaluation of welding power source for SMA welding, Abstracts of JWJS, 59 (2013), 163 (in Korean)