JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Experimental Equation of Hood Frame for Vehicle Considering Operating Angle
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Experimental Equation of Hood Frame for Vehicle Considering Operating Angle
Song, Yo-Sun; Hur, Kwan-Do; Son, In-Soo;
  PDF(new window)
 Abstract
This paper presents the experimental result and theoretical analysis result to investigate the correlation between the operating force, angle and locking torque for vehicle hood frame. Also, we derived the experimental equation that using the results for experiment and theory. The hood frame is switching-devices used for opening and closing the vehicle hood. It needs the correlation data between locking torques of each joint, operating force and angle of hood frame. The correlation data for torque and reaction force of hood frame obtained through experiment and theory analysis. Finally, the experimental equation of the locking torque prediction for the hood frame is derived.
 Keywords
Experimental Equation;Hood Frame of Vehicle;Locking Torque;Reaction Force;Operating Angle;Operating Force;
 Language
Korean
 Cited by
 References
1.
S. H. Shin, C. Cheong and S. S. Jung, 2007, "Experimental Evaluation of Buzz, Squeak and Rattle Noise of Vehicle Doors and Its Prevention", Transactions of Korean Society for Noise and Vibration Engineering, Vol. 17, No. 12, pp. 1217-1222. crossref(new window)

2.
S. J. Ahn et al., 2013, "Study on Property of NVH of Vehicle Doors Latch Part", Proceedings of the KSMPE Autumn Conference, p. 113.

3.
J. Hong, S. Seo, S. Kang, D. Lee, J. Ju and B. Park, 2013, "The Study of Hood Trembling on Driving Bumpy Road", Proceedings of the KSAE 2016 Annual Fall Conference, pp. 1065-1066.

4.
J. Y. Park, M. K. Im, Y. K. Oh, J. Y. Park and S. Y. Han, 2010, "Topology Optimization of the Inner Reinforcement of a Vehicle's Hood using Reliability Analysis", Journal of KSMTE, Vol. 19, No. 5, pp. 691-697.

5.
I. S. Son, S. J. Ahn, H. S. Eom, K. D. Hur, S. P. Lee and J. K. Lee, 2015, "Design Analysis of 4-Link Hood Frame for Vehicle", Proceedings of the KSME Fall Annual Meeting. p. 2069.

6.
K. S. Kim, J. Hwang, D. W. Lee, S. M. Lee and S. J. Lee, 2015, "Study on the Frictional Torque in the Angular Contact Ball Bearing for Machine Tool Spindle by Empirical Formula", Journal of KSPE, Vol. 32, No. 2, pp. 149-157. crossref(new window)

7.
Y. W. Shin and S. K. Lee, 2011, "Development an Empirical Formula for the Friction Coefficient of a Circular Friction Damper", Transactions of Korean Society for Noise and Vibration Engineering, Vol. 21, No. 6, pp. 491-498. crossref(new window)

8.
S. I. Hong, 2007, "Machine Design", Munundang, Chapter 6.