Advanced SearchSearch Tips
Characteristics of a Miniaturized Ultrasonic Motor for Auto-focusing of a Mobile Phone
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Characteristics of a Miniaturized Ultrasonic Motor for Auto-focusing of a Mobile Phone
Lim Kee-Joe; Lee Jong-Sub; Kang Seong-Hwa;
  PDF(new window)
In this paper, the design and characteristics of a novel ultrasonic motor are investigated. Such a motor is appropriate far use in the optical zoom or auto focusing functions of the lens system in mobile phones. Its design and simulation of performances are carried out by FEM commercial software (ATILA). The shape of the motor is similar to a square without one side, on which an optical lens can be mounted. Two sheets of piezoelectric ceramics are adhered to both sides of two legs of the elastic body, respectively To drive the ultrasonic motor, the voltage is applied to two sheets of piezoelectric ceramics bonded to one leg. The rotation direction can be easily changed by switching the piezoelectric sheets bonded to the other leg, to which voltage is applied. A proto type of the motor is fabricated and its outer size is including the camera lens of which the diameter is 7.5(mm). Its power consumption is about 0.3[W] and the speed of rotation is adjustable from 10 to 200[rpm] according to the applied voltage
Auto focusing;Bending Vibration;FEM;Piezoelectric;Ultrasonic Motor;
 Cited by
A Novel Ultrasonic Motor Using Orthogonal Bimorphs, IEEE Transactions on Magnetics, 2007, 43, 4, 1413  crossref(new windwow)
Fabrication and characteristics of impact type ultrasonic motor, Journal of the European Ceramic Society, 2007, 27, 13-15, 4159  crossref(new windwow)
An auto-focus lens actuator using ionic polymer metal composites: Design, fabrication and control, International Journal of Precision Engineering and Manufacturing, 2012, 13, 10, 1883  crossref(new windwow)
Yoshiaka Hata et al., 'Linear Actuator', US Patent, Pub. No. US 2003/0222538, pp. 1 - 12, 2003

Burhanettin KOC, et al., 'An Ultrasonic Motor Using a Metal-Ceramic Composite Actuator Generating Torsional Displacement', Jpn. J. Appl. Phys., Vol. 37, No. 10, 5659-5662, 1998 crossref(new window)

Kentaro Nakamura, et al., 'Ultrasonic Stepping Motor Using Spatially Shifted Standing Vibrations', IEEE Trans. On UFFC, Vol. 44, No.4, pp. 823 - 827, 1997 crossref(new window)

Faa-Jeng Lin, 'Fuzzy Adaptive Model-Following Position Control for Ultrasonic Motor', IEEE Trans. On PE, Vol. 12, No. 2, pp. 261 - 268, 1997

Kee-Joe Lim, Jong-Sub Lee, The transactions of KIEE, 49 (3), 155 (2000)

Kee-Joe Lim, Jong-Sub Lee, Trans. on electrical and electronic materials, 5 (2), 76 (2004) crossref(new window)

Toshiiku Sashida, et al., 'An Introduction to Ultrasonic Motor', CLARENDON PRESS, pp. 92-93, 1993