JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Stabilizing Control of DC/DC Buck Converters with Constant Power Loads in Continuous Conduction and Discontinuous Conduction Modes Using Digital Power Alignment Technique
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Stabilizing Control of DC/DC Buck Converters with Constant Power Loads in Continuous Conduction and Discontinuous Conduction Modes Using Digital Power Alignment Technique
Khaligh Alireza; Emadi Ali;
  PDF(new window)
 Abstract
The purpose of this raper is to address the negative impedance instability in DC/DC converters. We present the negative impedance instability of PWM DC/DC converters loaded by constant power loads (CPLs). An approach to design digital controllers for DC/DC converters Is presented. The proposed method, called Power Alignment control technique, is applied to DC/DC step-down choppers operating in continuous conduction or discontinuous conduction modes with CPLs. This approach uses two predefined state variables instead of conventional pulse width modulation (PWM) to regulate the output voltage. A comparator compares actual output voltage with the reference and then switches between the appropriate states. It needs few logic gates and comparators to be implemented thus, making it extremely simple and easy to develop using a low-cost application specific integrated circuit (ASIC) for converters with CPLs. Furthermore, stability of the proposed controllers using the small signal analysis as well as the second theorem of Lyapunov is verified. Finally, simulation and analytical results are presented to describe and verify the proposed technique.
 Keywords
Constant power loads;control;modeling, modeling and analysis;motor drives;negative impedance instability;power alignment;power converters;stability;
 Language
English
 Cited by
1.
The Field Modulation Effect of a Fluoride Plasma Treatment on the Blocking Characteristics of AlGaN/GaN High Electron Mobility Transistors,;;;;

Transactions on Electrical and Electronic Materials, 2011. vol.12. 4, pp.148-151 crossref(new window)
2.
Sliding Mode Current Controller Design for Power LEDs,;;

Journal of Electrical Engineering and Technology, 2011. vol.6. 1, pp.104-110 crossref(new window)
1.
The Field Modulation Effect of a Fluoride Plasma Treatment on the Blocking Characteristics of AlGaN/GaN High Electron Mobility Transistors, Transactions on Electrical and Electronic Materials, 2011, 12, 4, 148  crossref(new windwow)
2.
A Robust Fault Location Algorithm for Single Line-to-ground Fault in Double-circuit Transmission Systems, Journal of Electrical Engineering and Technology, 2011, 6, 1, 1  crossref(new windwow)
3.
Sliding Mode Current Controller Design for Power LEDs, Journal of Electrical Engineering and Technology, 2011, 6, 1, 104  crossref(new windwow)
4.
High-power CSI-fed induction motor drive with optimal power distribution based control, International Journal of Electronics, 2011, 98, 11, 1531  crossref(new windwow)
 References
1.
Emadi, M. Ehsani, and J. M. Miller, Vehicular Electric Power Systems: Land, Sea, Air, and Space Vehicles, New York: Marcel Dekker, Dec. 2003

2.
A. Khaligh, A. Emadi, G. A. Williamson, and C. Rivetta, 'Constant power load characteristics in multi-converter automotive power electronic intensive systems,' Society of Automotive Engineers (SAE) Journal, Paper No. 2005-01-3451, 2005; and, in Proc. SAE 2005 Future Transportation Technology Conference, Chicago, IL, Sept. 2005

3.
L. Del Ferraro and F. G. Capponi, 'Stability conditions for multi-converter power systems,' in Proc. 2005 IEEE Vehicle Power and Propulsion Conference, Chicago, IL, pp. 137-142, Sept. 2005

4.
R. Jayabalan and B. Fahimi, 'Modeling and analysis of switched mode DC-DC converters for vehicular power systems,' in Proc. 2005 IEEE Vehicle Power and Propulsion Conference, Chicago, IL, pp. 402-406, Sept. 2005

5.
A. Emadi, B. Fahimi, and M. Ehsani, 'On the concept of negative impedance instability in advanced aircraft power systems with constant power loads,' Society of Automotive Engineers (SAE) Journal, Paper No. 199901-2545; and, in Proc. 34th Intersociety Energy Conversion Engineering Conference, Vancouver, British Columbia, Canada, Aug. 1999

6.
V. Grigore, J. Hatonen, J. Kyyra, and T. Suntio, 'Dynamics of a buck converter with a constant power load,' in Proc. IEEE 29th Annual Power Electronics Specialists Conference, Fukuoka, Japan, pp. 72-78, May 1998

7.
B. Choi, B. Cho, and S. Hong, 'Dynamics and Control of DC-to-DC Converters Driving other Converters Downstream,' IEEE Trans. on Circuits and Systems I: Fundamental Theory and Applic., vol. 46, no. 10, pp.1240-1247, Oct. 1999 crossref(new window)

8.
S. F. Glover and S. D. Sudhoff, 'An experimentally validated nonlinear stabilizing control for power electronics based power systems,' Society of Automotive Engineers (SAE) Journal, Paper No. 981255, 1998

9.
S. D. Sudhoff, K. A. Corzine, S. F. Glover, H. J. Hegner, and H. N. Robey, 'DC link stabilized field oriented control of electric propulsion systems,' IEEE Trans. on Energy Conversion, vol. 13, no. 1, pp. 27-33, March 1998 crossref(new window)

10.
A. S. Kislovski, 'Optimizing the reliability of DC power plants with backup batteries and constant power loads,' in Proc. IEEE Applied Power Electronics Conf., Dallas, TX, pp. 957-964, March 1995

11.
A. S. Kislovski and E. Olsson, 'Constant-power rectifiers for constant-power telecom loads,' in Proc. 16th International Telecommunications Energy Conf., Vancouver, BC, pp. 630-634, Nov. 1994

12.
I. Gadoura, V. Grigore, J. Hatonen, and J. Kyyra, 'Stabilizing a telecom power supply feeding a constant power load,' in Proc. to' International Telecommunications Energy Conf., San Francisco, CA, pp. 243-248, Oct. 1998

13.
I. Kondratiev, E. Santi, R. Dougal, and G. Veselov, 'Synergetic control for DC-DC buck converters with constant power load,' in Proc. IEEE 35th Annual Power Electronics Specialists Conference, vol. 5, pp. 3758-3764, June 2004

14.
R. D. Middlebrook and S. Cuk, 'A general unified approach to modeling switching converter power stages,' in Proc. IEEE 1976 Power Electronics Specialist Conf., pp. 18-34, 1976

15.
S. R. Sanders, J. M. Noworoski, X. Z. Liu, and G. C. Verghese, 'Generalized averaging method for power conversion circuits,' IEEE Trans. on Power Electronics, vol. 6, no. 2, April 1991

16.
P. A. Ioannou and J. Sun, Robust Adaptive Control, PTR Prentice-Hall, 1996