JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Composite Load Models of Power Systems using On-line Measurement Data
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Composite Load Models of Power Systems using On-line Measurement Data
Choi Byoung-Kon; Chiang Hsiao Dong; Li Yinhong; Chen Yung Tien; Huang Der Hua; Lauby Mark G.;
  PDF(new window)
 Abstract
Load representation has a significant impact on power system analysis and control results. In this paper, composite load models are developed based on on-line measurement data from a practical power system. Three types of static-dynamic load models are derived: general ZIP-induction motor model, Exponential-induction motor model and Z-induction motor model. For the dynamic induction motor model, two different third-order induction motor models are studied. The performances in modeling real and reactive power behaviors by composite load models are compared with other dynamic load models in terms of relative mismatch error. In addition, numerical consideration of ill-conditioned parameters is addressed based on trajectory sensitivity. Numerical studies indicate that the developed composite load models can accurately capture the dynamic behaviors of loads during disturbance.
 Keywords
composite load model;measurement-based approach;nonlinear least-squares;parameter estimation;stability analysis;
 Language
English
 Cited by
1.
A Study on the Thermal and Chemical Properties of Carbon Nanotube Reinforced Nanocomposite in Power Cables,;;;;;;

Transactions on Electrical and Electronic Materials, 2009. vol.10. 6, pp.217-221 crossref(new window)
2.
Kalman-Filter Based Static Load Modeling of Real Power System Using K-EMS Data,;;;;;;

Journal of Electrical Engineering and Technology, 2012. vol.7. 3, pp.304-311 crossref(new window)
3.
Measurement-based Static Load Modeling Using the PMU data Installed on the University Load,;;;;;;;

Journal of Electrical Engineering and Technology, 2012. vol.7. 5, pp.653-658 crossref(new window)
4.
The Volume Measurement of Air Flowing through a Cross-section with PLC Using Trapezoidal Rule Method,;

Journal of Electrical Engineering and Technology, 2013. vol.8. 4, pp.872-878 crossref(new window)
1.
A novel tool for transient stability analysis of large-scale power systems: Its application to the KEPCO system, Simulation Modelling Practice and Theory, 2007, 15, 7, 786  crossref(new windwow)
2.
Effect of Probabilistic Pattern on System Voltage Stability in Decentralized Hybrid Power System, World Journal of Engineering and Technology, 2015, 03, 04, 195  crossref(new windwow)
3.
Role of Articular Cartilage and Chondrocyte Changes and Mononuclear Apoptosis in the Pathogenesis and Strategy of Therapy in Polyarticular Juvenile Rheumatoid Arthritis, Journal of Medical Sciences(Faisalabad), 2003, 3, 2, 137  crossref(new windwow)
4.
Estimation of composite load model with aggregate induction motor dynamic load for an isolated hybrid power system, Frontiers in Energy, 2015, 9, 4, 472  crossref(new windwow)
5.
Kalman-Filter Based Static Load Modeling of Real Power System Using K-EMS Data, Journal of Electrical Engineering and Technology, 2012, 7, 3, 304  crossref(new windwow)
6.
Fast and Reliable Estimation of Composite Load Model Parameters Using Analytical Similarity of Parameter Sensitivity, IEEE Transactions on Power Systems, 2016, 31, 1, 663  crossref(new windwow)
7.
The Volume Measurement of Air Flowing through a Cross-section with PLC Using Trapezoidal Rule Method, Journal of Electrical Engineering and Technology, 2013, 8, 4, 872  crossref(new windwow)
8.
Measurement-based Static Load Modeling Using the PMU data Installed on the University Load, Journal of Electrical Engineering and Technology, 2012, 7, 5, 653  crossref(new windwow)
 References
1.
CIGRE Task Force 38.02.05, 'Load Modeling and Dynamics', Electra, May 1990

2.
IEEE Recommended Practice for Excitation System Models for Power System Stability Studies, IEEE Standard 421. 5-1992

3.
IEEE Standard DeJinitions for Excitation Systems and Synchronwus Machines, IEEE Standard 421. 1-1986

4.
IEEE Task Force on Load Representation for Dynamic Performance, 'Bibliography on load models for power flow and dynamic performance simulation,' IEEE Trans. Power Syst., vol. 10, no. 1, pp. 523-538, Feb. 1995 crossref(new window)

5.
Dingguo Chen, Ronald R. Mohler, 'Neural-networkbased load modeling and its use in voltage stability analysis,' IEEE Trans. Control Systems Technology, vol. 11, no.11, pp. 460-470, Jul. 2003 crossref(new window)

6.
H.-D. Chiang et al., 'Development of a dynamic ZIPmotor load model from on-line field measurements', International Journal of Electrical Power & Energy Systems, vol. 19, no. 7, pp. 459-468, 1997 crossref(new window)

7.
C.-Y. Chiou, C.-H. Huang, H.-D. Chiang, J.-C. Wang, 'Development of a microprocessor-based transient data recording system for load behavior analysis' IEEE Trans. Power Syst., vol. 8, no. 1, pp. 16-22, 1993 crossref(new window)

8.
C.-J. Lin, Y.-T. Chen, H.-D. Chiang, and J.-C. Wang, 'Dynamic load models in power systems using the measurement approach,' IEEE Trans. Power Syst., vol. 8, no. 1, pp. 309-3 15, Feb. 1993 crossref(new window)

9.
J.-C. Wang, H.-D. Chiang, C.-L. Chang, and A.-H. Liu, 'Development of a fi-equency-dependent composite load model using the measurement approach,' IEEE Trans. Power Syst., vol. 9, no. 3, pp. 1546-1 556, Aug. 1994 crossref(new window)

10.
Y. Baghzouz, Craig Quist, 'Composite load model derivation fiom recorded field data,' in Proc. IEEE PES 1999 Winter Meeting, vol. 1 , pp. 731 - 718, 31 Jan.-4 Feb. 1999

11.
Ju, P., Handschin, E., Karlsson, D, 'Nonlinear dynamic load modeling: model and parameter estimation,' IEEE Trans. Power Syst., vol. 11, no. 4, pp. 1689 - 1697, NOV. 1996 crossref(new window)

12.
Wen-Shiow Kao, Chia-Tien Lin, Chiang-Tsang Huang, Yung-Tien Chen, Chiew-Yann Chiou, 'Comparison of simulated power system dynamics applying various load models with actual recorded data', IEEE Trans. Power Syst., vol. 9, no. 1, pp. 248 - 254, Feb. 1994 crossref(new window)

13.
Keyhani, A.; Lu, W.; Heydt, G.T., 'Composite neural network load models for power system stability analysis', IEEE PES Power Systems Conference and Exposition, 2004, vol. 2, pp. 1159 - 1163, Oct. 2004

14.
S. Ahmed-Zaid, M. Taleb, 'Structural Modeling of Small and Large Induction Machines Using Integral Manifolds', IEEE Transactions on Energy Conversion, vol. 6, no. 3, pp. 529 - 535, Sep. 1991 crossref(new window)

15.
R. Fletcher, Practical Methods of Optimization, Second Edition, John Wiley & Sons, New York, 1987

16.
L.G. Dias, M.E. El-Hawary, 'Nonlinear parameter estimation experiments for static load modeling in electric power systems,' IEE Proc. vol. 136, Pt. C, no. 2, pp. 68-77, Mar. 1998

17.
M. Burth, G. C. Verghese, and M. Velez-Reyes, 'Subset selection for improved parameter estimation in on-line identification of a synchronous generator,' IEEE Trans. Power Syst., vol. 14, no. 1, pp. 218-225, Feb. 1999 crossref(new window)

18.
P. M. Frank, Introduction to System Sensitivity Theory. New York: Academic Press, 1978

19.
P. Kundur, Power System Stability and Control, McGraw-Hill, Inc., 1994