Advanced SearchSearch Tips
Auto-Measurement of Induction Motor Parameters
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Auto-Measurement of Induction Motor Parameters
Kim Kyung-Seo; Byun Sung-Hoon;
  PDF(new window)
This paper presents the parameter measurement methods for high performance drive of induction motors, which are suitable for the self-commissioning function of commercial inverters. In this study, some factors that affect the accuracy of parameter measurement are examined. Measuring methods and conditions that are best fit to each parameter measurement procedure are then proposed. All the measurement procedures can be done without any auxiliary equipment, so that those can be easily adopted as self-commissioning functions of commercial inverters. To improve the measuring accuracy, least square approximation methods are adopted during the measurement procedure. The validity of the proposed methods are confirmed through experiments.
auto-measurement;commissioning;induction motors;parameters;
 Cited by
Robust state estimator design for a solar battery charging system, International Journal of Electronics, 2009, 96, 3, 229  crossref(new windwow)
Speed Range Extended Maximum Torque Per Ampere Control for PM Drives Considering Inverter and Motor Nonlinearities, IEEE Transactions on Power Electronics, 2017, 32, 9, 7151  crossref(new windwow)
Fuzzy-Logic-Based Vector Control Scheme for Permanent-Magnet Synchronous Motors in Elevator Drive Applications, IEEE Transactions on Industrial Electronics, 2007, 54, 4, 2190  crossref(new windwow)
Peter Vas, Parameter Estimation, Condition Monitoring and Diagnosis of Electrical Machines, Clarendon Press, pp. 180-306, 1993

A. M. Khambadkone and J. Holtz, 'Vector controlled induction motor drive with a self-commissioning scheme, ' IEEE Trans. Ind. Elec., vol. 38, no. 5, pp. 322-327, 1991 crossref(new window)

Jul-Ki Seok and Seung-Ki Sul, 'Induction motor parameter tuning for high-performance drives,' IEEE TransInd. Appl., vol. 37, no. 1, pp. 35-41,2001 crossref(new window)

K. Yanagawa, K. Sakai, S. Ishida, T. Endou and H. Fujii, 'Auto tuning for general purpose inverter with sensorless vector control,' in Proc. 1995 IPECYokohama, pp. 1005- 1009

R. J. Kerkman, .I. D. Thunes, T. M. Rowan and D. W. Schlegel, 'A frequency based determination of transient inductance and rotor resistance for field commissioning purposes,' IEEE Trans ' IEEE Trans Ind. Appli., vol. 32, no. 3, pp. 577-584, 1996 crossref(new window)

M. Ruff and H. Grotstollen, 'Off-line identification of the electrical parameters of an industrial servo drive system,' in Proc. IAS'96, pp. 213-220, 1996

A. Gastli, 'Identification of induction motor equivalent circuit parameters using the single-phase test,' IEEE Trans. Energy Conv., vol. 14, no. 1, pp. 51-569, 1999 crossref(new window)

Steven R. Shaw and Steven B. Leeb, 'Identification of induction motor parameters,' IEEE Trans. Ind. Elec., vol. 46, no. 1, pp. 139-149, 1999 crossref(new window)

C. Wang, D. W. Novotny and T. A. Lipo, 'An automated rotor time constant measurement system for indirect field oriented drives,' IEEE Trans. Ind. Appi.,vol. 24, no. 1,pp. 151-159, 1988 crossref(new window)

T. M. Rowan, R. J. Kirkman and D. Leggare, 'A simple on-line adaptation for indirect field orientation of an induction machine,' IEEE Trans Ind. Appl., vol. 27, no. 4, pp. 720-727, 1991 crossref(new window)

C. Gerald and P. Wheatley, Applied Numerical Analysis, Addison Wesley, pp. 534-540