Advanced SearchSearch Tips
Deduction of Optimal Conditions for Acrylic Etching Technique by using CO2 Laser
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Deduction of Optimal Conditions for Acrylic Etching Technique by using CO2 Laser
Kim, Hee-Je; Song, Keun-Ju; Park, Sung-Jin; Seo, Hyun-Woong; Kim, Ho-Sung; Choi, Jin-Young; Park, Sung-Joon;
  PDF(new window)
Laser cutting with the micro-control technique has great potential to be employed for acrylic machining. In this paper, the optimal conditions of acrylic etching have been investigated. The three parameters such as laser power, moving velocity, and thickness of acrylic are experimented to find out optimal conditions. From these experimental results, we have known that it is very important to control accurate power by the TRIAC switching technique. The best condition of acrylic etching is performed 10 Wand 72 mm/sec at the plastic thickness of 1.33 mm. The other case is performed 10 W and 48 mm/sec, and 12 W and 56 mm/sec at the acrylic thickness of 2.00mm, respectively. src=\\"\\" width=\\"330\\" height=\\"1024\\" align=\\"top\\" />

"Ā吀ऀ傓�⨀�⨀傽ヨ⨀ႎ�⨀ႍ�⨀梄�⨀䢃�⨀塿�⨀灼�⨀䂻�⨀ꘃĀ〇x搊ἂāȀ섟Ā䐂Áൂ[鳪떭裬Ꞁ駭验崠鰠㐲谠駬袠鳭醜胭验⃫낏⃬讬곬Ꞁ萃ÂȚऀ胫ꚬ送Yༀㄵ〮ㄸ㌮ㄳ㜮㈱㔢̃ ĂಈȀĀ辄ƨሀƨᄀऀः最Ā寈ᰀ 㐀㋖谀Õ妿냾︈唀ƨᄂؙ넀؂찉밀Ā寈ᰀ 㐀㋖谀⃕姂₼᳔岳Ö谀₼ༀ⃂샅쐀崀਀ે糂� 㨀 㧆퐀 ㈀㇇簀ⴀ㈀㋇簀⣖吀ⷂᣆ铇簀⤀ ਀ેꗁ谀 㨀€ᗆ킳쐀⃓짌㶻㣖哆ࣂ⃖貭਀☀渀戀猀瀀㬀☀渀戀猀瀀㬀☀渀戀猀瀀㬀☀渀戀猀瀀㬀☀渀戀猀瀀㬀☀渀戀猀瀀㬀☀渀戀猀瀀㬀☀渀戀猀瀀㬀 ⢬ᗆ킳쐀⃓짌㷁資가⤀્ࢸ巈ᇂ᠀₼ༀ⃀곈Ҵ嶮ガЀ 㨀☀渀戀猀瀀㬀☀渀戀猀瀀㬀㣆퐀㇇簀ⴀ㣆퐀㈀㟇粮䳉쀀਀૖㧂�₭膮ࣕ壂Ⴧ環頀⃅緀곕淇琀⃇裇㳂�琀 ૅ룈Ჴ쀀⃅緈ﳂ� ₼ᒷ趲좲⸀਀ૅ緌頀㨀⃕岭
Acrylic etching; laser;Laser power;Moving velocity;TRIAC;
 Cited by
펄스형 Nd:YAG 레이저를 이용한 FTO 식각에 대한 연구,김희제;박성준;손민규;이동길;이경준;

전기학회논문지, 2008. vol.57. 8, pp.1407-1411
Proposal of optimal process parameters for polymethylmethacryl plastic adhesion using a pulsed Nd:YAG laser, Optical Engineering, 2009, 48, 8, 084301  crossref(new windwow)
P.A. Atanassov, CW CO2 laser cutting of plastics, SPIE, Vol. 3092 Edinburgh, 1997, pp. 772-775

R.M. Lumley, Controlled separation of brittle materials using a laser, Am. Ceram. Soc. Bull. 48, 1969, pp. 850-854

E. Lambert, J.-L. Lambert, B. De Longueville, Severing of glass or vitrocrystalline bodies, US Patent 3,935,419, 1976

Bai Hua Zhou, S.M. Mahdavian, Experimental and theoretical analyses of cutting nonmetallic materials by low power CO2-laser, Journal of Materials Processing Technology 146, 2004, pp. 188-192 crossref(new window)

F.J. Grove, D.C. Wright, F.M. Hamer, Cutting of glass with a laser beam, US Patent 3,543,979, 1970

V.S. Kondratenko, Method of splitting non-metallic materials, US Patent 5,609,284, 1997

U. Unger, W. Wittenbecher, The cutting edge of laser technology, Glass 75, 1998, pp. 101-102

F. Caiazzo, F. Curcio,,G. Daurelio, F. Memola Capece Minutolo, Laser cutting of different polymeric plastics (PE, PP and PC) by a CO2 laser beam, Journal of Materials Processing Technology 159, 2005, pp. 279-285 crossref(new window)

C.H. Tsai, C.S. Liou, Fracture mechanism of laser cutting with controlled fracture, ASME J. Manuf. Sci. Eng., in press

Carosena Meola, Antonino Squillace, Fabrizio Memola Capece Minutolo, Renata Erica Morace, Analysis of stainless steel welded joints: a comparison between destructive and non-destructive techniques, Journal of Materials Processing Technology 155-156 (2004) 1893-1899 crossref(new window)

B.H. Zhou, Application of laser marking and cutting of materials in manufacturing industry, Master of Engineering Thesis, RMIT University, Melbourne, Australia, 1999

Ki-Kyong Noh, Jong-Jin Jeong, Hyun-Ju Chung, Hee-Je Kim, A study on the adjusting output energy of the CO2 laser controlled directly in AC power line, KIEE International Transactions on Electrophysics and Application, 2005, 5-C4

J. B. Bernstein and B. D. Colella, 'Laser-formed metallic connections employing a lateral link structure,' IEEE Trans. Comp., Packag., Manufact. Technol. A, vol. 18, pp. 690-692, Sept. 1995 crossref(new window)

R.S. Sirohi, A course of experiments with He-Ne Laser, A Halsted Press Book, 1985, pp. 9-11

Hyun-Ju Chung, Jong-Han Joung, Geun-Young Kim, Byoung-Dae Min, Hee-Je Kim, A CW. CO2Laser Using a High Voltage Dc-dc Converter with Half-bridge Resonant Inverter and Cockroft-Walton Multiplier, KIEE International Transactions on EA, 834

M. Boutinguizaa, J. Poua, F. Lusqui nosa, F. Quinteroa, R. Sotoa, M. P!erez-Amora, K. Watkinsb, W.M. Steenb, CO2 laser cutting of slate, Optics and Lasers in Engineering 37 (2002) 1525