Advanced SearchSearch Tips
A Nickel Micro Switch Operating in a Wide Range of Torsion Angles
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Nickel Micro Switch Operating in a Wide Range of Torsion Angles
Kahng, Seong-Joong; Kim, Jae-Hyeok; Kim, Young-Min;
  PDF(new window)
We report a nickel optical MEMS switch, being able to rotate through a large angle and to accommodate multiple channels. The proposed optical switch consists of a thin nickel mirror and two torsion springs supporting the mirror. The torsion springs are designed using a finite element method (FEM) such that plastic deformation of the thin nickel is avoided during the large torsion actuation. For switching speed improvement, transient vibration of the released mirror is suppressed by optimizing the mirror design and a fast switching response of is demonstrated.
MEMS;Optical switch;Switching response;Yield strength;
 Cited by
Fabrication of two types of micro ion sources for a micro time-of-flight mass spectrometer, Journal of Micromechanics and Microengineering, 2007, 17, 8, 1542  crossref(new windwow)
Effect of Duty Cycle on Atmospheric Plasma Generation using Micromachined Electrodes, Japanese Journal of Applied Physics, 2009, 48, 4, 04C196  crossref(new windwow)
J. E. Ford, V. A. Aksyuk, D. J. Bishop, and J. A. Walker, 'Wavelength add-drop switching using tilting micromirrors', J. Lightwave Technol., No. 5, 17 pp. 904, 1999

H. Toshiyoshi and H. Fujita, 'Electrostatic micro torsion mirrors for an optical switch matrix', J. Microelectromechanical Systems, Issue. 4, 5 pp. 231, May 1996

M. Urano, H. Ishii, Y. Tanabe, T. Shimamura, T. Sakata, T. Kamei, K. Kudou, M. Yano and K. Machida, 'Novel fabrication process and structure of a low-voltage-operation micromirror array for optical MEMS switches', Proc. IEEE Int. Electron Devices Meeting, IEDM '03 Technical Digest. pp. 39.5.1, 2003

L. Y. Lin, E. L. Goldstein and R. W. Tkach, 'On the expandability of free-space micromachined optical cross connects', J. Lightwave Technol., No. 4, 18 pp. 482, 2000

J. H. Kim, H. K. Lee, B. I. Kim, J. W. Jeon, J. B. Yoon and E. Yoon, 'A high fill-factor micro-mirror stacked on a crossbar torsion spring for electrostatically-actuated two-axis operation in largescale optical switch', Proc. IEEE 16th Int. Conf. MEMS-03 Kyoto pp. 259, 2003

L. J. Hornbeck, 'Digital Light Processing and MEMS: an overview', Proc. Advanced Applications of Lasers, 1996/Broadband Optical Networks/Smart Pixels/Optical MEMs and their Applications, /LEOS 1996 Summer Topical Meetings pp. 7, 1996

H. Moon, J. Kim and Y. Kim , 'Measurement of Yield Strength for Electroplated Nickel Film Using Microcantilever,' KIEE International Trans. on EA, No. 5, 4-C pp. 247, 2004

K. P. Larsen, A. A. Rasmussen, J. T. Ravnkilde, M. Ginnerup and O. Hansen, 'MEMS device for bending test: measurements of fatigue and creep of electroplated nickel,' Sensors and Actuators A: Phys., Issues. 1-2, 103 pp. 156, 2003

H. Kawata, J. Tabata, M. Yasuda, and K. Murata, 'Long Ni cantilever fabrication with new sacrificial process,' Jpn. J. Appl. Phys. 41 pp. 4327, 2002

L. S. Stephens, K. W. Kelly, S. Simhadri, A. B. McCandless, and E. I. Meletis, 'Mechanical property evaluation and failure analysis of cantilevered LIGA nickel microposts,' J. Microelectromechanical Systems, Issue. 3, pp. 347, Oct 2001

E. Mazza, S. Abel, and J. Dual, 'Experimental determination of mechanical properties of Ni and Ni-Fe microbars,' Microsystem Technologies, pp. 197, Feb. 1996

T. Christenson, T. Buchheit, D. Schmale, and R. Bourcier, 'Mechanical and metallographic characterization of LIGA fabricated nickel and 80%Ni-20%Fe permalloy,' Proc. MRS Symposium, 518 pp. 185, 1998

D. J. Inman, Vibration with control measurement and stability (Prentice-Hall, Eaglewood Cliffs N.J., International ed., Chap. 1, pp. 4.A. Books, 1989