Advanced SearchSearch Tips
An Analytical Approach for Design of Nth-band FIR Digital Filters with Equi-Ripple Passband
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
An Analytical Approach for Design of Nth-band FIR Digital Filters with Equi-Ripple Passband
Moon, Dong-Wook; Kim, Lark-Kyo; Lim, Cheng-Chew;
  PDF(new window)
In FIR (Finite Impulse Response) filter applications, Nth-band FIR digital filters are known to be important due to their reduced computational requirements. The conventional methods for designing FIR filters use iterative approaches such as the well-known Parks-McClellan algorithm. The Parks-McClellan algorithm is also used to design Nth-band FIR digital filters after Mintzer`s research. However, a disadvantage of the Parks-McClellan algorithm is that it needs a large amount of design time. This paper describes a direct design method for Nth-band FIR Filters using Chebyshev polynomials, which provides a reduced design time over indirect methods such as the Parks-McClellan algorithm. The response of the resulting filter is equi-ripple in passband. Our proposed method produces a passband response that is equi-ripple to within a minuscule error, comparable to that of Mintzer`s design method which uses the Parks-McClellan algorithm.
Chebyshev polynomials;digital filter design;FIR filter;multi-rate filters;Nth-band filters;
 Cited by
L. R. Rabiner and B. Gold, Theory and Applications of Digital Signal Processing, Englewood Cliffs NJ: Prentice-Hall, 1975

Naoyuki Aikawa and Masamitsu Sato, 'Designing Linear Phase FIR Digital Filters with Flat Passband. and Equiripple Stopband Characteristics', Electronics and Communications in Japan, Part 3, vol. 86, No. 4, pp. 89-95, 2003 crossref(new window)

Y. C. Jenq, 'On FIR digital filter implementations for interpolation', IEEE Trans. on Acoustics, Speech, and Signal Processing, vol. 29, Issue 2, pp. 315-317, Apr. 1981 crossref(new window)

P. P. Vaidyanathan and Truong Nguyen, 'A ‘trick’ for the design of FIR half-band filters', IEEE Trans. on Circuits and Systems, vol. 34, Issue 3, pp. 297- 300, Mar. 1987 crossref(new window)

R. E. Crochiere and L. R. Rabiner, Multirate Digital Signal Processing, Englewood Cliffs, NJ: Prentice-Hall, 1983

J. H. McClellan, T. W. Parks, and L. R. Rabiner, 'A computer program for designing optimum FIR linear phase digital filters', IEEE Trans. on Audio and Electroacoustics, vol. 21, Issue 6, pp. 506-526, Dec. 1973 crossref(new window)

M. Vlcek, P. Zahradnik, R. Unbehauen, 'Analytical design of FIR filters', IEEE Trans. on Signal Processing, vol. 48, Issue 9, pp. 2705-2709, Sept. 2000 crossref(new window)

F. Mintzer, 'On half-band, third-band, and Nth-band FIR filters and their design', IEEE Trans. On Acoustics, Speech, and Signal Processing, vol. 30, 5, pp. 734-738, Oct. 1982 crossref(new window)

A. N.Willson and H. J. Orchard, 'A design method for half-band FIR filters', IEEE Trans. on Circuits and Systems - I: Fundamental Theory and Applications, vol. 46, Issue 1, pp. 95-101, Jan. 1999 crossref(new window)

J. M. Nohrden and T. Q. Nguyen, 'Constraints on the cutoff frequencies of Mth-band linear-phase FIR filters', IEEE Trans. on Signal Processing, vol. 43, Issue 10, pp. 2401-2405, Oct. 1995 crossref(new window)

S. Oraintara, T. Q. Nguyen, 'M-th band filter design based on cosine modulation', Circuits and Systems, 1998. ISCAS '98. Proceedings of the 1998 IEEE International Symposium, vol. 5, pp. 37-40 crossref(new window)

S. Oraintara, T. Q. Nguyen, 'A simple mapping between Mth-band FIR filters using cosine modulation', IEEE Signal Processing Letters, vol. 10, Issue 5, pp. 125-128, May. 2003 crossref(new window)

W. H. Press et al., Numerical Recipes, Cambridge, U.K.: Cambridge, Univ. Press, 1986, pp. 148-149