JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Centralized Control Algorithm for Power System Performance using FACTS Devices in the Korean Power System
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Centralized Control Algorithm for Power System Performance using FACTS Devices in the Korean Power System
Kang, Sang-Gyun; Seo, Sang-Soo; Lee, Byong-Jun; Chang, Byung-Hoon; Myung, Ro-Hae;
  PDF(new window)
 Abstract
This paper presents a centralized control algorithm for power system performance in the Korean power system using Flexible AC Transmission Systems (FACTS) devices. The algorithm is applied to the Korean power system throughout the metropolitan area in order to alleviate inherent stability problems, especially concerns with voltage stability. Generally, control strategies are divided into local and centralized control. This paper is concerned with a centralized control strategy in terms of the global system. In this research, input data of the proposed algorithm and network data are obtained from the SCADA/EMS system. Using the full system model, the centralized controller monitors the system condition and decides the operating point according to the control objectives that are, in turn, dependent on system conditions. To overcome voltage collapse problems, load-shedding is currently applied in the Korean power system. In this study, the application of the coordination between FACTS and switch capacitor (SC) can restore the solvability without load shedding or guarantee the FV margin when the margin is insufficient. Optimal Power Flow (OPF) algorithm, for which the objective function is loss minimization, is used in a stable case. The results illustrate examples of the proposed algorithm using SCADA/EMS data of the Korean power system in 2007.
 Keywords
Coordinated control;Voltage stability;Optimal power flow;FACTS;CPF (Continuation Power Flow);Korean power systems;
 Language
English
 Cited by
1.
Measurement-based Static Load Modeling Using the PMU data Installed on the University Load,;;;;;;;

Journal of Electrical Engineering and Technology, 2012. vol.7. 5, pp.653-658 crossref(new window)
1.
Measurement-based Static Load Modeling Using the PMU data Installed on the University Load, Journal of Electrical Engineering and Technology, 2012, 7, 5, 653  crossref(new windwow)
 References
1.
C. W. Talor, Power Systems voltage stability. McGraw-Hill, 1994.

2.
P. Kundur, Power systems stability and control. McGraw-Hill, 1994.

3.
T. Van Cutsem and C. Vourans, Voltage Stability of Electric Power Systems. Norwell, MA: Kluwer, 1998.

4.
Z. Feng, V. Ajjarapu, D. J. Maratukulam, “A comprehensive approach for preventive and corrective control to mitigate voltage collapse”, IEEE Transaction on power systems, Vol. 15, May, 2002. crossref(new window)

5.
J. Zhao, H. D. Chiang, H. Li, B. Zhang, “A novel preventive control approach for mitigating voltage collapse”, Power Engineering Society General Meeting, 2006, IEEE. crossref(new window)

6.
F. Capitanescu, T. V. Cutsem, “Preventive control of voltage security margins: A multicontingency sensitivity-base approach”, IEEE Transactions on power systems, Vol. 17, May, 2002. crossref(new window)

7.
X. Wang, G. C. Ejebe, J. Tong, J. G. Waight, “Preventive/Corrective Control for voltage stability using direct interior point method”, IEEE Transactions on power systems, Vol. 13, Aug, 1998. crossref(new window)

8.
V. Ajjarapu, C. Christy, “The continuation power flow: a tool for steady state voltage stability analysis”, IEEE Trans. On Power Systems, Vol. PWRS-7, Feb, 1992.

9.
T. J. Overbye, “A power flow measure for unsolvable cases”, IEEE Trans on power systems, Vol. 9, Aug, 1994.

10.
T. J. Overbye, “Computation of a practical method to restore power flow solvability”, IEEE Trans. On power systems, Vol. PWRS-10, Feb, 1995.

11.
I. Dobson, L. Lu, “Computing an optimum direction in control space to avoid saddle node bifurcation and voltage collapse in electric power systems”, IEEE Trans. On automatic control. Vol. 37, Oct, 1992.

12.
T. V. Cutsem, “An approach to corrective control of voltage instability using simulation and sensitivity”, IEEE Trans. On Power Systems, Vol. 10, May, 1995.

13.
J. Zhao, H. D. Chiang, H. Li. “A new contingency parameterization CPF model and sensitivity method for voltage stability control”, IEEE PES General meeting 2005, July, San Francisco, USA.

14.
Q. Wu, D. H. Popovic, D. J. Hill, “Voltage security enhancement via coordinated control”, IEEE Trans. On power systems, Vol. 16, Feb, 2001.

15.
Y. Guo, D. J. Hill, Y. Wang, “Global transient stability and voltage regulation for power systems”, Power systems, IEEE Transactions on, Vol. 16, Nov, 2001.

16.
C. W. Taylor, “Line drop compensation, high side voltage control, secondary voltage control-why not control a generator like a static Var compensator?”, Power Engineering Society Summer Meeting, 2000, IEEE, Vol. 1, July, 2000.

17.
J. B. Davies, L. E. Midford, “High side voltage control at Manitoba Hydro”, Power Engineering Society Summer Meeting, 2000, IEEE, Vol. 1, July, 2000.

18.
H. Kitamura M. Shimomura, J. Paserba, “Improvement of voltage stability by the advanced high side voltage control regulator”, Power Engineering Society Summer Meeting, 2000, IEEE, Vol. 1, July, 2000.

19.
A. Murdoch, J. J. Sanchez-Gasca, M. J. D'Antonio, R. A Lawson, “Excitation control for high side voltage regulation”, Power Engineering Society Summer Meeting, 2000, IEEE, Vol. 1, July, 2000.

20.
H. Lefebvre, D. Frangnier, P. Mallet, M. Bulot, “Secondary coordinated voltage control system: feedback of EDF”, Power Engineering Society Summer Meeting, 2000, IEEE, Vol. 1, July, 2000.

21.
S. Corsi, M. Piozzi, M. Sforza, G. Dell’olio., “The coordinated automatic voltage control for the Italian transmission Grid-Part I: reasons of the choice and overview of the consolidated hierarchical system”, Power systems, IEEE Transactions on, Vol. 19, Nov, 2004.

22.
S. Corsi, M. Piozzi, M. Sforza, G. Dell’olio. “The coordinated automatic voltage control for the Italian transmission Grid-Part II: control apparatuses and field performance of the consolidated hierarchical system”, Power systems, IEEE Transactions on, Vol. 19, Nov, 2004.

23.
S. Corsi, “The Secondary Voltage Regulation in Italy”, IEEE/PES 2000 Summer Meeting, Seattle, USA, July 16-20 2000.

24.
Y. Chen, “Development of Automatic Slow Voltage Control for Large Power System”, Ph.D. thesis, Washington State University, 2001.

25.
J. Su, V. M. Venkatasubramanian, “A Hybrid On-line Slow Voltage Control Scheme for Large Power Systems”, Bulk Power System Dynamics and Control-VII, Charleston, USA, August 19-24, 2007.

26.
Narain G. Hingorani, Laszlo Gyugyi, Understanding FACTS, IEEE Press.

27.
Laszlo Gyugyi, “Power Electronics in Electric Utilities: Static Var Compensators”, Proceedings of the IEEE, Vol. 76, No. 4, April 1988.

28.
L. Gyugyi, E. R. Taylor, “Characteristics of Static Thyristor Controlled Shunt Compensators for Power Transmission System Applications”, IEEE Trans, PAS, Vol. PAS-99, No. 5, Sep, 1980.

29.
Anders Pouyan Pourbeik, Bhaskar Ray Bostrom, “Modeling and Application Studies for a Modern Static Var System Installation,”IEEE Transactions on Power Delivery, Vol. 21, No. 1, Jan. 2006.

30.
John J. Paserba, “How FACTS Controllers Benefit AC Transmission Systems”, Power Engineering Society General Meeting, 2004, IEEE, pp.1257-1262, 6-10, June, 2004.

31.
B. Lee, H. Song, S. H. Kwon, G. Jang, J. H. Kim, V. Ajjarapu, “A study on determination of interface flow limits in the KEPCO system using modified continuation power flow (MCPF), IEEE Trans. Power Systems, Vol. 17, No. 3, Aug. 2002, pp. 557-564. crossref(new window)

32.
“FACTS Technology Workshop-Domestic application of FACTS and related issues”, KERI, Hyosung Co., 2003.

33.
“Development of Large Capacity Electricity Transport Technology-Stage 1: FACTS operation and local development of related equipment technology”, KERI, Hyosung Co., 2005.

34.
B. Chang, S. Kim, J. Han, D. Choi, H. Song, B. Lee, “Research on location selection of 100MVA STATCOM for improvement of metropolitan voltage stability,” KIEE Research Publications, Vol. 56, No. 9, pp. 1543-1548.

35.
G. Heydt, C. C. Liu, “Transmission Networks with Multiple FACTS controllers: Control Conceptualization: control strategy and Design for FACTS”, EPRI, Palo Alto, CA: 2001.

36.
Z. Feng, V. Ajjarapu, and D. J. Maratukulam, “A practical minimum load shedding strategy to mitigate voltage collapse”, IEEE Trans. on power systems, Nov, 1998.

37.
Alexander J. Flueck, Jayabharath R. Dondeti, “A new continuation power flow tool for investigating the nonlinear effects of transmission branch parameter variations”, IEEE trans. Vol. 15, No. 1, Feb, 2000

38.
V. Ajjarapu, Computational Techniques for Voltage Stability Assessment and Control, New York: Springer, 2006.

39.
M. Ilic, A. Stankovic, Voltage problems on transmission networks subject to unusual power flow patterns, IEEE Trans. Power Syst., Vol. 6, No.1, pp.339-328, Feb. 1991. crossref(new window)

40.
P. A. Lof, G. Anderson, D. J. Hill, Voltage stability indices for stressed power systems IEEE PES winter meeting New York, 1992.

41.
Y. C. Wu, A. S. Debs, R. E. Marsten, “A direct Nonlinear Predictor-Corrector Primal-Dual Interior Point Algorithm for Optimal Power flow”, IEEE Trans. On power systems, Vol. 9, May, 1994.

42.
H. Wei, H. Sasaki, J. Kubokawa, R. Yokoyama, “An Interior Point Nonlinear Programming for Optimal Power Flow Problems with A Novel Data Structure”, IEEE Trans. on Power System, Vol.13, No.3, August 1998.

43.
Geraldo Leite Torres, “Interior-point method for nonlinear optimal power flow using voltage rectangular coordinates”, IEEE Trans. on Power Systems, Vol.13, No.4, Nov, 1998