JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Cost/Worth Approach to Evaluate UPFC Impact on ATC
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Cost/Worth Approach to Evaluate UPFC Impact on ATC
Rajabi-Ghahnavieh, Abbas; Fotuhi-Firuzabad, Mahmud; Shahidehpour, Mohammad; Feuillet, Rene;
  PDF(new window)
 Abstract
Available transfer capability (ATC) is a measure of the transfer capability remaining in a transmission system. Application of unified power flow controllers (UPFCs) could have positive impacts on the ATC of some paths while it might have a negative impact on the ATC of other paths. This paper presents an approach to evaluate the impacts of UPFCs on the ATC from a cost/worth point of view. The UPFC application worth is considered as the maximum cost saving in enhancing the ATC of the paths due to the UPFC implementation. The cost saving is considered as the cost of optimal application of other system reinforcement alternatives (except for UPFC) to reach the same ATC level obtained by UPFC application. UPFC application costs include the maximum cost of alleviating the probable negative impact on the ATC of some paths caused by implementing UPFCs. Optimal system reinforcement is used for systems with UPFCs to determine the aforementioned cost. The proposed method is applied to the IEEERTS and the results are evaluated through a sensitivity analysis. The cost/worth of UPFC application is also used to develop an index for optimal UPFC location and the results are compared with those of other indices. A comparison is finally made with the results obtained using an existing ATC allocation profit-based approach to determine UPFC application worth.
 Keywords
Available transfer capability;ATC enhancement;Unified power flow controller;Power system reinforcement;
 Language
English
 Cited by
1.
A PSO-Based Fuzzy Long-Term Multi-Objective Optimization Approach for Placement and Parameter Setting of UPFC, Arabian Journal for Science and Engineering, 2014, 39, 4, 2953  crossref(new windwow)
2.
Robust placement and tuning of UPFC via a new multiobjective scheme-based fuzzy theory, Complexity, 2015, 21, 1, 126  crossref(new windwow)
 References
1.
Yong-Hua Song and A. T. Johns, Flexible AC Transmission Systems (FACTS) IEE Power Series 30, the Institution of Engineering and Technology Press, 2000.

2.
Collin Schauder, Eric Stacey, Mack Lund, Leszo Gyugyi, L. Kovalsky, Albert Keri, A. Mehraban and Abdel-Aty Edris, “AEP UPFC project: installation, commissioning and operation of the ${\pm}160$ MVA STATCOM (phase I)”, IEEE Trans. on Power Delivery, Vol. 13, pp. 1530-1535, Oct. 1998. crossref(new window)

3.
North American Electricity Reliability Council, “Available Transfer Capability: Definitions and determination”, June 1996.

4.
H. Farahmand, M. Rashidinejad, A.A. Gharaveici and M. Shojaee, “An Application of Hybrid Heuristic Approach for ATC Enhancement” Proceeding of IEEE LESCOP 2006, Halifax, Canada, July 2006.

5.
Taisuke Masuta and Akihiko Yokoyama, “ATC Enhancement Considering Transient Stability Based on Optimal Power Flow Control by UPFC”, Proceeding of IEEE PowerCon 2006, Chongqing, China, Oct., 2006.

6.
H. Farahmand, M. Rashidinejad, A.A. Gharaveici and G. A. Shahriary, “Optimal Location of UPFC for ATC Enhancement in Restructured Power Systems”, Proceeding of IEEE LESCOP 2007, Montreal, Canada, Oct. 2007.

7.
Jun Zhang and Akihiko Yokoyama, “Application of Interline Power Flow Controller to ATC Enhancement by Optimal Power Flow Control”, Proceeding of IEEE Power Tech 2007, Lausanne, Switzerland, July 2007.

8.
Rober Fischer and Sun-Kowang Joo; “Economic Evaluation of Transmission Expansion for Investment Incentives in a Competitive Electricity Market”, International Journal of Control, Automation, and Systems, Vol. 6, No. 5, pp. 627-638, October 2008.

9.
Ebrahim Shayesteh, Ashkan Yousefi, Mohsen Parsa Moghaddam and Gholam Reza Yousefi, “An economic comparison between incorporation of FACTS devices and Demand Response programs for ATC enhancement”, Proceeding of IEEE EPEC 2008, Vancouver, Canada, Oct. 2008.

10.
Zhimin Li and Weixing Li, “Technical challenges of ATC calculation in the power industry deregulated environment”, Proceeding of IEEE PowerCon2004, Singapore, Nov. 2004.

11.
Peter W. Sauer, “Alternatives for calculating transmission reliability margin (TRM) in available transfer capability (ATC)”,Proceeding of the Thirty-First Hawaii International Conference on System Sciences, Jan. 1998.

12.
Osman Bulent Tor, Ali Nezih Guven and Mohammad Shahidehpour, “Congestion-Driven Transmission Planning Considering the Impact of Generator Expansion”, IEEE Trans. on Power Systems, Vol. 23, pp. 781-789, May 2008. crossref(new window)

13.
Allen J. Wood and Bruce. F. Wollenberg, Power Generation, Operation, and Control, Wiley-Interscience, 2nd edition, January 1996.

14.
Pablo A. Ruiz and Peter W. Sauer, “Voltage and Reactive Power Estimation for Contingency Analysis Using Sensitivities”, IEEE Trans. on Power Systems, Vol. 22, pp. 639-647, May 2007. crossref(new window)

15.
IEEE Reliability Test System Task Force, “IEEE Reliability Test System”, IEEE Trans. of Power Apparatus and Systems, PAS-98, pp. 2047-2054, Nov/Dec 1979. crossref(new window)

16.
Antonio Pievatolo, Enrico Tironi and Ivan Valade, “Semi-Markov Processes for power system reliability assessment with application to uninterruptible power supply,” IEEE Trans. on Power Systems, Vol. 19, pp. 1326-1333, Aug. 2004. crossref(new window)

17.
Abbas Rajabi-Ghahnavieh, Mahmud Fotuhi-Firuzabad, Mohammad Shahidehpour and Rene Feuillet, “Optimal Allocation of Available Transfer Capability in Operating Horizon”, IEEE Trans. on Power Systems, Vol. 24, pp. 967-975, May 2009. crossref(new window)