JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Study on Fast Maximum Efficiency Control of Stator-Flux-oriented Induction Motor Drives
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on Fast Maximum Efficiency Control of Stator-Flux-oriented Induction Motor Drives
Shin, Myoung-Ho;
  PDF(new window)
 Abstract
This paper presents a novel maximum efficiency control scheme for convergence improvement in stator-flux-oriented induction motor drives. Three input powers are calculated at three different flux levels, respectively. A quadratic curve is obtained using the quadratic interpolation method using the three points. The flux level at the lowest point of the interpolated curve is calculated, which is not the real minimum input power of the motor, but an estimated one. Hence, the quadratic interpolations are repeated with three new points chosen using the selection method for new points for refitting until the convergence criteria are satisfied. The proposed method is verified by simulation results.
 Keywords
Maximum efficiency control;Quadratic interpolation;Induction motor drive;Search controller;
 Language
English
 Cited by
 References
1.
Hyung-Woo Lee, Chan-Bae Park, Byung-Song Lee, "Thrust Performance Improvement of a Linear Induction Motor" Journal of Electrical Engineering &Technology, Vol. 6, No. 1, pp.81-85, Jan. 2011. crossref(new window)

2.
A.C. Megherbi, H. Megherbi, K. Benmahamed, A.G. Aissaoui, A. Tahour, "Parameter Identification of Induction Motors using Variable-weighted Cost Function of Genetic Algorithms" Journal of Electrical Engineering &Technology, Vol. 5, No. 4, pp.597-605, Nov. 2010. crossref(new window)

3.
Ammar Medoued, Abdesselem Lebaroud, Ahcene Boukadoum, Guy Clerc, "On-line Faults Signature Monitoring Tool for Induction Motor Diagnosis" Journal of Electrical Engineering &Technology, Vol. 5, No. 1, pp.140-145, Mar. 2010. crossref(new window)

4.
Seesak Jangjit, Panthep Laohachai, "Parameter Estimation of Three-Phase Induction Motor by Using Genetic Algorithm", Journal of Electrical Engineering &Technology, Vol. 4, No. 3, pp.360-364, Sep. 2009. crossref(new window)

5.
Namhun Kim, Minhuei Kim, "Modified Direct Torque Control System of Five Phase Induction Motor" Journal of Electrical Engineering &Technology, Vol. 4, No. 2, pp.266-271, Jun. 2009. crossref(new window)

6.
Abdessalem Chikhi, Khaled Chikhi, "Induction Motor Direct Torque Control with Fuzzy Logic Method" Journal of Electrical Engineering &Technology, Vol. 4, No. 2, pp.234-239, Jun. 2009. crossref(new window)

7.
Arezki Menacer, Gérard Champenois, Mohamed Said Naît Saïd, Abdelhamid Benakcha, Sandrine Moreau, Said Hassaine, "Rotor Failures Diagnosis of Squirrel Cage Induction Motors with Different Supplying Sources", Journal of Electrical Engineering &Technology, Vol. 4, No. 2, pp.219-228, Jun. 2009. crossref(new window)

8.
D. S. Krischen, D. W. Novotny, and W. Suwanwisoot, "Minimizing induction losses by excitation control in variable frequency drives," IEEE Trans. on Industry Applications, vol. 20, pp. 1244-1250, Sep./Oct. 1984. crossref(new window)

9.
S.-K. Sul and M.-H. Park, "A novel technique for optimal efficiency control of a current-source inverter-fed induction motor", IEEE Trans. on Power Electronics, vol. 3, no. 2, pp. 192-199, 1988. crossref(new window)

10.
R. D. Lorenz and S. M. Yang, "Efficiency-optimized flux trajectories for closed-cycle operation of fieldorientation induction machine drives," IEEE Trans. on Industry Applications, vol. 28, pp. 574-580, May/June 1992. crossref(new window)

11.
G. O. Garcia, J. C. Mendes Luis, R. M. Stephan, and E. H. Watanabe, "An efficient controller for an adjustable speed induction motor drive, " IEEE Trans. on Industrial Electronics, vol. 41, pp. 533-539, Oct. 1994. crossref(new window)

12.
I. Kioskeridis and N. Margaris, "Loss minimization in induction motor adjustable-speed drive," IEEE Trans. on Industrial Electronics, vol. 43, pp. 226-231, Feb. 1996. crossref(new window)

13.
G. Dong and O. Ojo, "Efficiency optimizing control of induction motor using natural variables," IEEE Trans. on Industrial Electronics, vol. 53, no. 6, pp. 1791-1798, Dec. 2006. crossref(new window)

14.
D. S. Kirschen, D. W. Novotny, and T. A. Lipo, "Online efficiency optimization of a variable frequency induction motor drive", IEEE Trans. on Industry Applications, vol. 21, no. 4, pp. 610-615, 1985. crossref(new window)

15.
G. C. D. Sousa, B. K. Bose, and J. G. Cleland, "Fuzzy logic based on-line efficiency optimization control of an indirect vector-controlled induction motor drive", IEEE Trans. on Industrial Electronics, vol. 42, no. 2, pp. 192-198, 1995. crossref(new window)

16.
G.-S. Kim, I.-J. Ha, and M.-S. Ko, "Control of induction motors for both high dynamic performance and high power efficiency", IEEE Trans. on Industrial Electronics, vol. 39, no. 4, pp. 323-333, 1992. crossref(new window)

17.
B. K. Bose, N. R. Patel, and K. Rajashekara, "A Neuro-Fuzzy-Based On-Line Efficiency Optimization Control of a Stator Flux-Oriented Direct Vector-Controlled Induction Motor Drive", IEEE Trans. on Industrial Electronics, vol. 44, no. 2, pp. 270-273, 1997. crossref(new window)

18.
C.-M. Ta and Y. Hori, "Convergence improvement of efficiency optimization control of induction motor drives", IEEE Trans. on Industry Applications, vol. 37, no. 6, pp. 1746-1753, 2001. crossref(new window)

19.
D. D. A. Souza, W. C. P. D. A. Filho, and G. C. D. Sousa, "Adaptive fuzzy controller for efficiency optimization of induction motors," IEEE Trans. on Industrial Electronics, vol. 54, no. 4, pp. 2157-2164, Aug. 2007. crossref(new window)

20.
M.-H. Shin, "Maximum efficiency control of induction motor drives using quadratic interpolation method", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 23, no.9, pp. 62-66, 2009. crossref(new window)

21.
C. Chakraborty and Y. Hori, "Fast efficiency optimization techniques for the indirect vectorcontrolled induction motor drives", IEEE Trans. on Industry Applications, vol. 39, no. 4, pp. 1070-1076, 2003. crossref(new window)

22.
S. N. Vukosavic and E. Levi, "Robust DSP-based efficiency optimization of a variable speed induction motor drive," IEEE Trans. on Industrial Electronics, vol. 50, no. 3, pp. 560-570, Jun. 2003. crossref(new window)

23.
S.-D. Wee, M.-H. Shin, and D.-S. Hyun, "Stator- Flux-Oriented Control of Induction Motor Considering Iron Loss," IEEE Trans. on Industrial Electronics, vol. 48, no. 3, pp. 602-608, Jun. 2001. crossref(new window)

24.
X. Xu, R. D. Doncker, and D. W. Novotny, "A Stator Flux Oriented Induction Machine Drive", IEEE PESC88, pp. 870-876, 1988.

25.
X. Xu and D. W. Novotny, "Implementation of direct stator flux orientation control on a versatile DSP based system," IEEE Trans. Ind. Applications, vol. 27, no. 4, pp. 694-700, July/Aug. 1991. crossref(new window)

26.
S. S. Rao, "Optimization: Theory and Applications," John Willy and Sons, pp.234-242, 1984.