Advanced SearchSearch Tips
Considerations on the Long-term Reliability of On-line Partial Discharge Ceramic Sensor for Thermal Power Generators and its Demonstration in the Field
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Considerations on the Long-term Reliability of On-line Partial Discharge Ceramic Sensor for Thermal Power Generators and its Demonstration in the Field
Sun, Jong-Ho; Youn, Young-Woo; Hwang, Don-Ha; Kang, Dong-Sik;
  PDF(new window)
The present study describes the considerations on the long-term reliability of the on-line partial discharge (PD) ceramic sensor for thermal power generators. Voltage acceleration aging tests were carried out under continuous and impulsive thermal aging at more than , considering the practical service environment. Experimental results show that the sensors have a life that could last for more than 100 years, excellent dielectric characteristics, and insulation strength. In addition, the ceramic on-line PD sensors were installed in a thermal power generator in Korea for demonstration. The results of the PD calibration and test voltage application prove that the on-line ceramic sensors have satisfactory performances for on-line PD measurement.
Partial discharge;Thermal power generator;Voltage acceleration aging test;On-line ceramic sensor;
 Cited by
유도전동기 온라인 감시진단 시스템 개발,김기범;윤영우;황돈하;선종호;정태욱;

조명전기설비학회논문지, 2014. vol.28. 5, pp.23-30 crossref(new window)
A New Directional Coupler Type Partial Discharge Sensor Installed on the Power Lead of Rotating Machine, Journal of Electrical Engineering and Technology, 2016, 11, 6, 1769  crossref(new windwow)
Development of Online Monitoring System for Induction Motors, Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, 2014, 28, 5, 23  crossref(new windwow)
H. G. Sedding, et al., "A New sensor for Detecting Partial Discharge in Operating Turbine Generators," IEEE/PES 1991 Winter Meeting, Feb. 3-7, 1991.

J. P. Zondervan, et al., "Fundamental Aspects of PD Patterns of On-line Measurements on Turbo generators," IEEE Trans. On DEI, vol.7, no.1, Feb. 2000.

G. C. Stone, E. A. Boulter, I. Culbert, and H. Dhirrani, "Electrical Insulation for Rotating Machines," IEEE Press, Wiley, pp.86-102, 2004.

J. Y. Jeong, et al., "Assessment of 23kV Capacitive Coupler for On-line Partial Discharge Measurements," Journal of Electrical Engineering & Technology, vol.4, no.1, pp.123-130, 2009. crossref(new window)

Dong-Sik Kang, et al., "Characteristics of Ceramic Coupler for On-line Partial Discharge Measurements in High Voltage Rotating Machines," Trans. KIEE, vol.51C, no.5, pp.205-212, May. 2009.

J. Y. Jeong, et al., "Electrical Life Time Constant Estimation of Ceramic Element for Sensor," Trans. KIEE, vol.58, no.10, Oct. 2009.

M. Honda et al., "V-T Characteristics of Epoxy Mold Insulation for Sustained AC Voltage," IEEE Trns. Power Apparatus and Systems, vol. PAS-103, no. 5, May. 1984.

Shigemitsu Okabe et al., "Common Insulating Properties in Insulating Materials," IEEE Trns. Dielectrics and Electrical Insulation, vol.13, no.1 Feb. 2006.

Volker Homburg et al., "Basic Investigation of a Macroscopic Interface between Two Solid Dielectrics," in Proceedings of IEEE International Symposium on Electrical Insulation, Pittsburgh, PA USA, June. 1994.

KSC IEC 60060-1, "High Voltage test technique," 2001.

H. Yoshida and K. Umemoto, "Insulation Diagnosis for Rotating Machine Insulation," IEEE Trns. EI, vol.21, no.6, Dec. 1986.

Minoru Ezoe et al., "Effects of Interfacial Phenomena on Dielectric Breakdown of Filled Epoxy Resin," in Proceedings of High Voltage Engineering Symposium, no. 467, Aug. 1999.