JOURNAL BROWSE
Search
Advanced SearchSearch Tips
PI-CCC Based Switched Reluctance Generator Applications for Wind Power Generation Using MATLAB/SIMULINK
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
PI-CCC Based Switched Reluctance Generator Applications for Wind Power Generation Using MATLAB/SIMULINK
Kaliyappan, Kannan; Padmanabhan, Sutha;
  PDF(new window)
 Abstract
This paper presents a novel nonlinear model of Switched Reluctance Generator (SRG) based on wind Energy Conversion system. Closed loop control with based Proportional Integrator current Chopping Control machine model is used. A Power converter in SRG can be controlled by using PI-CCC proposed model, and can be produced maximum power efficiency and minimize the ripple contents in the output of SRG. A second power converter namely PI based controlled PWM Inverter is used to interface the machine to the Grid. An effective control technique for the inverter, based on the pulse width modulation (PWM) scheme, has been developed to make the line voltage needs less power switching devices and each pair of turbine the generated active power starts increasing smoothly. This proposed control scheme feasibility and validity are simulated on SIMULINK/SIM POWER SYSTEMS only.
 Keywords
Switched reluctance generator (SRG);Proportional integrator current chopping control (PI-CCC);Finite element analysis (FEA);
 Language
English
 Cited by
 References
1.
T.J.E Miller," Switched Reluctance Motors and their Control",, Oxford University Press, 1993.

2.
D.A Torrey," Variable reluctance generators in wind energy systems," Proc. of the IEE Power Electronics Conf., pp. 561-567, 1993.

3.
D.A Torrey," Switched Reluctance Generators and their Control," IEEE Trans. on Industrial Electronics, Vol..49, pp. 3-14, 2002. crossref(new window)

4.
Osamu Inhinokura, Tsukasa kikuchi, kanji nakammurg Tadaki Uatannable and Hai-jiau Guo," Dynamic Simulation Model of Switched Reluctance Generator" IEEE Transactions Vol. 39, No. 5. sep 2003 pp. 3253- 3255.

5.
M.K EI-Nemr, M.A Al-khazendar, E.M Rashad and M.A Hassanin "Modelling and steady state Analysis of Stand - Alone Switched Reluctance Generator", IEEE Power Engineering Society General Meeting july 2003, pp. 1894-1899.

6.
F.Sores and P.J Costa Branco," Simulation of a 6/4 Switched Reluctance Model Based on MATLAB/ Simulink Enviorment," IEEE Transactions Aerospace and Electronics system, Vol. 37, jily 2005, pp. 989- 1009.

7.
Shoujun Son, Weiguo Liu, "A Novel Method and Dynamic Simulation of a Four-Phase Switched Reluctance Generator System Based on MATLAB/ SIMULINK". IEEE 2007.

8.
Yilmaz sozer, David A.Torrey, "Closed loop control of Excitation for High speed Switched Reluctance Generator" IEEE Trans.in 2003.

9.
Dr.S.Sutha, K.Kannan," PI-CCC Based Minimization Torque Ripple in Switched Reluctance Generator Using MATLAB/SIMULINK"[IEEE International Conference, pp. 522-527 23-24 June, 2010].

10.
Dr.S. Sutha, K. Kannan, "Closed loop control of excitation parameters for High speed Switched Reluctance Generator Using MATLAB/SIMULINK" International Journel Of Electrical Engineering And Informatics (IJEEI), Pages (232-243), Vol. 2, [3] 2010, ISSN(2085-6830).

11.
Dr.S. Sutha, K.Kannan "Power Limitation of a variable speed wind turbines with Fixed Pitch angle in Switched Reluctance Generator Using MATLAB/ SIMULINK," 2011 International Conference on Recent Advancements in Electrical, Electronics and Control Engineering pages(465-469),