Publisher : The Korean Institute of Electrical Engineers
DOI : 10.5370/JEET.2013.8.4.911
Title & Authors
Advanced LDC Test Bed Using Energy Recovery Technique for HEVs Kim, Yun-Sung; Jung, Dong-Wook; Lee, Byoung-Kuk;
This paper reports the development of test bed with the energy recovering technique using two-step boost converter. The device is utilized for LDC aging test of Hyundai Motor's LPI AVANTE HEV in mass production. The developed power recycle type test bed is designed as 1.5 kW class to test up to the maximum load power of LDC and is also designed to supply scant power supply up to 500 W after power recycle. The theoretical design analysis and operational characteristics analysis results of test bed are reported, and its practicality and reliability are verified through the test result. Also, the finally developed test bed confirms approximately 79~85 % energy saving effect compared to the usual traditional aging test system.
Boost converter;Eco-friendly electric vehicles;Energy recovery;Forward converter;Hybrid electric vehicles;Low DC-DC converter;Phase shift full bridge converter;
J. A. Sabate, V. Vlatkovic, R. B. Ridley, F. C. Lee, B. H. Cho, "Design considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter," APEC1990, pp. 275-284.
L. H. Mweene, C. A. Wright, M. F. Schlecht, "A 1kW 500kHz front-end converter for a distributed power supply system," IEEE Transactions on Power Electronic, Vol. 6, No. 3, pp. 398-407, Jul. 1991.
R. Redl, N. O. Sokal, L. Balogh, "A novel softswitching full-bridge DC/DC converter: Analysis, design considerations, and experimental results at 1.5kW, 100kHz," PESC1990, pp. 162-172.
Wu Chen, X. Ruan, R. Zhang, "A Novel Zero- Voltage-Switching PWM Full Bridge Converter," IEEE Transactions on Power Electronics, Vol. 23, No. 2, Mar. 2008, pp. 793-801.
B.-R. Lin, K. Huang, D. Wang, "Analysis and implementation of full-bridge converter with current doubler rectifier," IEE Proceedings, Electric Power Applications, Vol. 152, No. 5, pp. 1193-1202, Sept. 2005.
SongTingTing, HuangNianci, "A Novel Zero-Voltage and Zero-Current-Switching Full-Bridge PWM Converter," APEC 2003, Vol. 2, pp. 1088-1092.
Xinbo Ruan, Yangguang Ya, "A Novel Zero-Voltage and Zero-Current-Switching PWM Full-Bridge Converter Using Two Diodes in Series With the Lagging Leg," IEEE Transactions on Industrial Electronics, Vol. 48, No. 4, pp. 777-785, Aug. 2001.
Chris Iannello, Shiguo Luo, Issa Batarseh, "Full Bridge ZCS PWM Converter for High-Voltage High- Power Applications," IEEE Transactions on Aerospace and Electronics Systems, Vol. 38, No. 2, pp. 515-526, Apr. 2002.
Yungtaek Jang, Milan M. Jovanovic, Yu-Ming Chang, "A New ZVS-PWM Full-Bridge Converter," IEEE Transactions on Power Electronics, Vol. 18, No. 5, pp. 1122-1129, Sept. 2003.
Yungtaek Jang, Milan M. Jovanovic, "A New Family of Full-Bridge ZVS Converter," IEEE Transactions on Power Electronics, Vol. 19, No. 3, pp. 701-708, May 2004.
Min Chen, Dehong Xu, Mikihiko Matsui, "Study on Magnetizing Inductance of High Frequency Transformer in the Two-Transistor Forward Converter," Power Conversion Conference 2002, Vol. 2, pp. 597-602, 2002.
Dharmraj V. Ghodke, K. Muralirishnan, "1.5kW two switch forward ZCZVS converter using primary side clamping," Power Electronics Specialists Conference 2002, Vol. 2, pp. 893-898, 2002.
F.L. Luo, H. Ye, "Positive output cascade boost converters," IEE Proceedings, Electric Power Applications, Vol. 151, No. 5, pp. 590-606, Sept. 2004.
J. Leyva-Ramos, M.G. Ortiz-Lopez, L.H. Diaz- Saldierna, M. Martinez-Cruz, "Average current controlled switching regulators with cascade boost converters," IET, Power Electronics, Vol. 4, No. 1, pp. 1-10, Jan. 2011.
H.Y. Kanaan and G. Sauriol, K. Al-Haddad "Smallsignal modeling and linear control of a high efficiency dual boost single-phase power factor correction circuit," IET Power Electrons, Vol. 2, No. 6, pp. 665-674, Nov. 2009.