Publisher : The Korean Institute of Electrical Engineers
DOI : 10.5370/JEET.2013.8.5.1146
Title & Authors
Design Considerations and Validation of Permanent Magnet Vernier Machine with Consequent Pole Rotor for Low Speed Servo Applications Chung, Shi-Uk; Chun, Yon-Do; Woo, Byung-Chul; Hong, Do-Kwan; Lee, Ji-Young;
This paper deals with design consideration and validation of a new pole-slot combination for permanent magnet vernier machine (PMVM) with consequent pole (CP) rotor especially for extremely low speed servo applications. A 136pole-24slot PMVM with CP rotor is introduced and analyzed by 2D and 3D finite element analysis (FEA) and discussion on experimental validation is also included.
Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines, IEEE Transactions on Industrial Electronics, 2016, 63, 7, 4105
Development of a 20-Pole–24-Slot SPMSM With Consequent Pole Rotor for In-Wheel Direct Drive, IEEE Transactions on Industrial Electronics, 2016, 63, 1, 302
A. Toba, and A. Lipo, "Novel dual-excitation perernier manent magnet vernier machine," Proc. IEEE IAS Annual Meeting, Oct. 1999, , Vol. 4, pp. 2539-2544.
A. Toba, and A. Lipo, "Generic torque-maximizing design methodology of surface permanent-magnet vernier machine," IEEE Trans. Ind. Appl., Vol. 36, No. 6, pp. 1539-1546, Nov./Dec. 2000.
E. Spooner, and L. Haydock, "Vernier hybrid machines," in Proc. IEE Electr. Power Appl. No. 6, pp. 655-662, Nov. 2003.
J. Li, K.T. Chau, J.Z. Jiang, C. Liu, and W. Li, "A new efficient permanent-magnet vernier machine for Wind Power Generation," IEEE Trans. Magn., Vol.46, No. 6, pp. 1475-1478, June 2010.
S. Niu, S.L. Ho, W.N. Fu, and L.L. Wang, "Quantitative comparison of novel vernier permanent magnet machines," in IEEE Trans. Magn. Vol. 46, No. 6, pp. 2032-2035, June 2010.
C. Liu, J. Zhong, and K. T. Chau, "A novel fluxermanent-controllable vernier permanent-magnet machine," IEEE Trans. Magn., Vol. 47, No. 10, pp. 4238-4241, Oct. 2011.
S. Niu, S. L. Ho, W. N. Fu, "A novel direct-drive dual-structure permanent magnet machine," IEEE Trans. Magn., Vol. 46 No. 6, pp. 2036-2039, June 2010.
S. U. Chung, J. W. Kim, B. C. Woo, D. K. Hong, J. Y Lee, and D. H. Koo, "A novel design of modular three-phase permanent magnet vernier machine with consequent pole rotor," IEEE Trans. Magn., Vol. 47, No. 10. pp. 4215-4218, Oct. 2011.
D.G. Dorrell, M.F. Hsieh, and Y.G. Guo, "Unbalanced magnet pull in large brushless rare-earth permanent magnet motors with rotor eccentricity," IEEE Trans. Magn., Vol. 45, No. 10, pp. 4586-4589, Oct. 2009.