JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Study on Optimal Condition of Adaptive Maximum Torque Per Amp Controlled Induction Motor Drives
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Study on Optimal Condition of Adaptive Maximum Torque Per Amp Controlled Induction Motor Drives
Kwon, Chun-Ki;
  PDF(new window)
 Abstract
Adaptive Maximum Torque Per Amp (Adaptive MTPA) control for induction motor drives seeks to achieve a desired torque with the minimum possible stator current regardless of operating points. This is favorable in terms of inverter operation and nearly optimal in terms of motor efficiency. However, the Adaptive MTPA control was validated only from the viewpoint of tracking a desired torque and was not shown that the desired torque is achieved with minimum possible stator current. This work experimentally demonstrates that optimal condition for Adaptive Maximum Torque Per Amp Control Strategy is achieved regardless of rotor resistance variation.
 Keywords
Induction motor model;Optimal control;Adaptive maximum torque per amp (MTPA) control;Maximum torque per amp condition;
 Language
English
 Cited by
 References
1.
M. N. Uddin, Sang Woo Nam, "New Online Loss-Minimization-Based Control of an Induction Motor Drive," IEEE transactions on Power Electronics, Vol. 23, March 2008, pp. 926-933. crossref(new window)

2.
C. Gonzalez, J. Arribas, and D. Prieto, "Optimal Regulation of Electric Drives With Constant Load Torque," IEEE transactions on Industrial Electronics, Vol. 53, No. 6, December 2006, pp. 1762-1769. crossref(new window)

3.
G. Mino-Aguilar, J.M. Moreno-Eguilaz, B. Pryymak, and J. Peracaula, "An induction motor drive including a self-tuning loss-model based efficiency controller," Applied Power Electronics Conference and Exposition, APEC 2008, Feb 2008, pp. 1119-1125

4.
O. S. Ebrahim, M. A. Badr, A. S. Elgendy, P. K. Jain, "ANN-Based Optimal Energy Control of Induction Motor Drive in Pumping," IEEE transactions on Energy Conversion, Vol. 25, No. 3, 2010, pp. 652-660. crossref(new window)

5.
J. Miao, H. Li, S. Chen, "Study on Efficiency Optimization Control of Induction Motor Drive System," Control and Decision Conference, July 2008, pp. 3244-3247

6.
B. Mirafzal, G. L. Skibinski, R.M. Tallam, "Determination of Parameters in the Universal Induction Motor Model," Indusstry Applications Conference, 2007, 42nd IAS Annual Meeting, Conference Record of the 2007 IEEE, September 2007, pp.1207- 1216

7.
C. Kwon, "Study on an Adaptive Maximum Torque Per Amp Control Strategy for Induction Motor Drives". Journal of Electrical Engineering Technology, Vol. 8, No. 1, January, 2013, pp. 110-117. crossref(new window)

8.
O. Wasynczuk, S.D. Sudhoff, K.A. Corzine, J.L. Tichenor, P.C. Krause, I.G. Hansen, and L.M. Taylor, "A Maximum Torque Per Ampere Control Strategy for Induction Motor Drives," IEEE Transactions on Energy Conversion, Vol. 13, No. 2, June 1998, pp. 163-169. crossref(new window)

9.
M. O. Sonnaillon, G. Bisheimer, C. De Angelo, G. O. Garcia, "Online Sensorless Induction Motor Temperature," IEEE transactions on Energy Conversion, Vol. 25, No. 2, 2010, pp. 273-280. crossref(new window)

10.
Z. Gao, T. G. Habtler, and R. G. Harley, "A Complex Space Vector Approach to Rotor Temperature Estimation for Line-Connected Induction Machines With Impaired Cooling," IEEE Transaction on industrial electronics, Vol. 56, Jan. 2009, pp. 239-247. crossref(new window)

11.
B. Karanayil, M. F. Rahman, and C. Grantham, "Online Stator and Rotor Resistance Estimation Scheme Using Artificial Neural Networks for Vector Controlled Speed Sensorless Induction Motor Drive," IEEE transactions on Industrial Electronics, Vol. 54, No. 1, February 2007, pp. 167-176. crossref(new window)

12.
T. A. Najafabadi, F. R. Salmasi, P. Jabehdar-Maralani, "Detection and Isolation of Speed-, DCLink Voltage-, and Current-Sensor Faults Based on an Adaptive Observer in Induction-Motor," IEEE Transaction on industrial electronics, Vol. 58, No. 5, 2011, pp. 1662-1672. crossref(new window)

13.
T. Orlowska-Kowalska, M. Dybkowski, "Stator-Current-Based MRAS Estimator for a Wide Range Speed-Sensorless Induction-Motor," IEEE Transaction on industrial electronics, Vol. 57, No. 4, 2010, pp. 1296-1308. crossref(new window)

14.
S. D. Sudhoff, P. L. Chapman, D. C. Aliprantis, and B. T. Kuhn, "Experimental Characterization Procedure for Use with of an Advanced Induction Machine Model," IEEE Transactions on Energy Conversion, Vol. 18, Mar 2003, pp. 48-56. crossref(new window)

15.
S. D. Sudhoff, D. C. Aliprantis, B. T. Kuhn and P. L. Chapman, "An Induction Machine Model for Predicting Inverter-Machine Interaction," IEEE Transactions on Energy Conversion, Vol. 17, June 2002, pp. 203-210 crossref(new window)

16.
C. Kwon, S. D. Sudhoff, "Genetic Algorithm-Based Induction Machine Characterization Procedure With Application to Maximum Torque Per Amp Control," IEEE Transactions on Energy Conversion, Vol. 21, June 2006, pp. 405-415 crossref(new window)

17.
P. C. Krause, O. Wasynczuk, S. D. Sudhoff, Analysis of Electric Machinery and Drive Systems, IEEE Press, 2002.

18.
"Energy Systems Analysis Consortium (ESAC) Genetic Optimization System Engineering Tool (GOSET) Ver 1.02," School of Electrical and Computer Engr., Purdue Univ., West Lafayette, IN, 47907, 2003.

19.
J. Kim, J. Choi, and S. Sul, "Novel Rotor Flux Observer Using Observer Characteristic Function in Complex Vector Space for Field Oriented Induction Motor Drives," IEEE transactions on Industry Applications, Vol. 38, September/October 2002, pp. 1334-1443. crossref(new window)

20.
P. L. Jansen and R. D. Lorenz, "A Physically Insightful Approach to the Design and Accuracy Assessment of Flux Observer for Field Oriented Induction Machine Drives," IEEE Transactions on Industry Applications, Vol. 30, No. 1, January/February 1994, pp. 101-110. crossref(new window)

21.
C. Kwon, S. D. Sudhoff, "An On-line Rotor Resistance Estimator for Induction Machine Drives," the 2005 International Electric Machines and Drives Conference, May 2005, pp. 391-397.