JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Efficiency Improvement for Concentrated Flux IPM Motors for Washing Machines
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Efficiency Improvement for Concentrated Flux IPM Motors for Washing Machines
Yoon, Keun-Young; Kwon, Byung-Il;
  PDF(new window)
 Abstract
Concentrated flux interior permanent magnet (CFIPM) motors have the advantage that their utilization of flux linkage is more efficient than that of general IPM motors and CFIPM motors are suitable for washing machine motors, which demand low-speed, high-torque specifications. However, low efficiency occurs in the low-speed high-torque mode considering the high-speed operation for spin mode. This paper proposes a magnet overhang structure between the rotor core that reduces leakage flux and improves efficiency for a CFIPM in wash mode. Optimization of the 3D design of magnet overhang structures is performed to improve the efficiency with the same quantity of permanent magnets. The validity of the optimal design is experimentally verified through the fabrication of prototypes.
 Keywords
Concentrated flux;Efficiency;Leakage flux;Magnet overhang;Optimal design;
 Language
English
 Cited by
 References
1.
J.R. Hendershot, Jr. and T.J.E. Miller, Design of Brushless Permanent Magnet Motor. Oxford, U.K.: Clarendon, 1994.

2.
L. Fang et al., "Study on High-Efficiency Performance in Interior Permanent-Magnet Synchronous Motor With Double-layer PM Design," IEEE Trans. on Magnetics, Vol. 44, pp. 4393-4396, November 2008. crossref(new window)

3.
B.J. Chalmers et al., "Performance of Interior Type Permanent Magnet Alternator," Proc. Inst. Elect. Eng., Elect. Power, Vol. 141, pp. 186-190, January 1994. crossref(new window)

4.
Lin. D et al., "Analytical Prediction of Cogging Torque for Spoke Type Permanent Magnet Machine," IEEE Trans. on Magnetics, Vol. 48, pp. 1035-1038, February 2012. crossref(new window)

5.
K.H. Yim et al., "Forced Vibration Analysis of an IPM Motor for Electrical Vehicles due to Magnetic Force," IEEE Trans. on Magnetics, Vol. 48, pp. 2981-2984, November 2012. crossref(new window)

6.
Rukmi Dutta et al., "Design and Analysis of an Interior Permanent Magnet (IPM) Machine With Very Wide Constant Power Operation Range," IEEE Trans. Energy Conversion, vol. 23, pp. 25-33, March 2008. crossref(new window)

7.
K.Y. Hwang et al., "A Study on Optimal Pole Design of Spoke-Type IPMSM With Concentrated Winding for Reducing the Torque Ripple by Experiment Design Method," IEEE Trans. on Magnetics, Vol. 45, pp. 4712-4715, October 2009. crossref(new window)

8.
K.C. Kim et al., "The Study on the Overhang Coefficient for Permanent Magnet Machine by Experiment Design Method," IEEE Trans. on Magnetics, Vol. 43, pp. 1833-1836, April 2006.

9.
K. C. Kim et al., "The Dynamic Analysis of Spoke-Type Permanent Magnet with Large Overhang," IEEE Trans. on Magnetics, Vol. 41, pp. 3805-3808, October 2005. crossref(new window)

10.
T. Ohnishi et al., "Optimal Design of Efficient IPM Motor Using Finite Element Method," IEEE Trans. on Magnetics, Vol. 36, pp. 3537-3539, September 2000. crossref(new window)

11.
A. Koski et al., "Predicting The Performance of a Permanent Magnet Synchronous Motor by Analytical and Numerical Methods," IEEE Trans. on Magnetics, Vol. 28, pp. 935-938, January 1992. crossref(new window)

12.
T. W. Simpson et al., "Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design Optimization," AIAA, Vol. 39, pp. 2233-2241, 2001. crossref(new window)

13.
M. Lukaniszyn, et al., "Optimization of Permanent Magnet Shape for Minimum Cogging Torque Using a Genetic Algorithm," IEEE Trans. on Magnetics, Vol. 40, No. 2, March 2004.

14.
Hany M. Masanien, et al., "Design Optimization of Transverse Flux Linear Motor for Wight Reduction and Performance Improvement Using Response Surface Methodology and Genetic Algorithms," IEEE. Trans. on Energy Convers. Vol. 25, No. 3, September 2010.

15.
Uler. G. F, et al., "Utilizing genetic algorithms for the optimal design of electromagnetic devices," IEEE, Trans. on Magnetics, Vol. 30, No. 6, pp. 4296-4298, November 1994. crossref(new window)

16.
K.Y. Hwang et al., "Rotor Pole Design in Spoke Type BLDC Motor by RSM," IEEE, Trans. on Magnetics, Vol. 45, pp. 4712-4715, October 2009. crossref(new window)

17.
Y. Zhang et al., "Shape optimization of a PMLSM using Kriging and genetic algorithm," ICIEA, Vol. 45, pp. 1496-1499, 2010.

18.
Luiz Lebensztajn, et al., "Kriging: A Useful Tool for Electromagnetic Device Optimization," IEEE Trans. Magnetics, Vol. 40, No. 2, March 2004.