Pil-Wan Han, Un-Jae Seo, Jae-Hak Choi, Yon-Do Chun, Dae-Hyun Koo, and Ju Lee, "Optimizing design variables for high efficiency induction motor considering cost effect by using genetic algorithm," Journal of Electrical Engineering and Technology (JEET), vol. 7, no. 6, pp. 948-953, 2012.
Yong-Tae Kim, Gyu-Won Cho, and Gyu-Tak Kim, "The estimation method comparison of iron loss coefficients through the iron loss calculation," Journal of Electrical Engineering and Technology (JEET), vol. 8, no. 6, pp. 1409-1414, 2013.
Gyu-Won Cho, Dong-Yeong Kim, and Gyu-Tak Kim, "The iron loss estimation of IPMSM according to current phase angle," Journal of Electrical Engineering and Technology (JEET), vol. 8, no. 6, pp. 1345-1351, 2013.
Deepak Singh and A. Arkkio, "Calorimetric measurement of the stator core losses caused by manufacturing," Master Thesis, Scg. Eng., AALTO Univ., Arabia, 2011.
T. Nakata, M. Nakano, and K. Kawahara, "Effects of stress due to cutting on magnetic characteristics of silicon steel," IEEE Translation Journal on Magnetics in Japan, vol. 7, no. 6, pp. 453-457, 1992.
Alexander J. Clerc, and Annette Muetze, "Measurement of stator core magnetic characteristics", 2011 IEEE International Electric Machines & Drives Conference, pp. 1433-1438, 2011.
IEC Standard Publication 60404-2, "Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame", 2008.
JIS C 2556, "Methods of measurement of the magnetic properties of magnetic steel sheet and strip by means of a single sheet tester", 1996.
J. Sievert, "The measurement of magnetic properties of electrical sheet steel - survey on methods and situation of standards", Journal of Magnetism and Magnetic Materials, Vol. 215, pp. 647-651, 2000.
O. Nakazaki, Y. Kai, T. Todaka, and M. Enokizono, "Iron loss properties of a practical rotating machine stator core at each manufacturing stage", International Journal of Applied Electromagnetics and Mechanics, vol. 33, pp. 79-86, 2010.
K. Matsubara, N. Takahashi, K. Fujiwara and T. Nakata, "acceleration technique of waveform control for sing sheet tester," IEEE Trans. on Magn., vol. 31, no. 6, pp. 2400-2402, Nov. 1995.
M. Petkovsek, P. Zajek, J. Nastran, and D. Voncina, "Determination of magnetic properties of softmagnetic ring cores with a reduced number of primary and secondary winding turns," Industrial Electronics, 2004 IEEE International Symposium on, Vol. 1, pp. 577-581, 4-7 May 2004.
Boglietti A, Cavagnino A, Ferraris L, and Lazzari M, "The annealing influence onto the magnetic and energetic properties in soft magnetic material after punching process ", Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International, Vol. 6, pp. 503-508, 2003.