JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The Application of Classical Direct Torque and Flux Control (DTFC) for Line-Start Permanent Magnet Synchronous and its Comparison with Permanent Magnet Synchronous Motor
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Application of Classical Direct Torque and Flux Control (DTFC) for Line-Start Permanent Magnet Synchronous and its Comparison with Permanent Magnet Synchronous Motor
Soreshjani, Mohsen Hosseinzadeh; Heidari, Reza; Ghafari, Ahmad;
  PDF(new window)
 Abstract
This paper attempts to design and present a comparison of classical Direct Torque Flux Control (DTFC) for Line-Start Permanent Magnet Synchronous Motor (LSPMSM) and its equal Permanent Magnet Synchronous Motor (PMSM). In order to present an in-depth analysis, both motors for DTFC Voltage Source Inverter (VSI)-fed in the same situations of different conditions are simulated and tested. The advantages of the proposed method for LSPMSM over the PMSM are discussed and analyzed.
 Keywords
Line-Start Permanent Magnet Synchronous Motor (LSPMSM);Permanent Magnet Synchronous Motor (PMSM);Direct Torque Flux Control (DTFC);Adjustable Speed Drive (ASD);
 Language
English
 Cited by
1.
Analytic Model of Four-switch Inverter-fed Driving System for Wye or Delta-connected Motor with Current Ripple Reduction Scheme, Journal of Electrical Engineering and Technology, 2016, 11, 1, 109  crossref(new windwow)
 References
1.
Peter Vas, "Sensorless vector and direct torque control," Oxford university press Oxford, UK, 1998.

2.
Chee-Mun Ong, "Dynamic simulation of electric machinery: using MATLAB/Simulink," Upper Saddle River, Prentice Hall PTR, vol. 5, 1998.

3.
Melfi Michael J., Steve Evon and Robbie McElveen, "Induction versus permanent magnet motors," IEEE Industry Applications Mag., vol. 15, no. 6, pp. 28-35, Nov. - Dec. 2009. crossref(new window)

4.
Melfi, Michael J., David Rogers S., Steve Evon, Bill Martin, "Permanent-Magnet Motors for Energy Savings in Industrial Applications," In Petroleum and Chemical Industry Conference, pp. 1-8, Sept. 2006.

5.
Kazumi Kurihara, Azizur Rahman, "High-efficiency line-start interior permanent-magnet synchronous motors," IEEE Trans. Industry Applications, vol. 40, no. 3, pp. 789-796, may- Jun. 2004. crossref(new window)

6.
Arash Hassanpour Isfahani, Sadegh Vaez-Zadeh, "Linestart permanent magnet synchronous motors: Challenges and opportunities," Energy. vol. 34, no. 11, pp. 1755-1763, Nov. 2009. crossref(new window)

7.
Fei, W., Patrick Luk, J. Ma, Jian-Xin Shen and G. Yang, "A high-performance line-start permanent magnet synchronous motor amended from a small industrial three-phase induction motor," IEEE Trans. Magnetics, vol. 45, no. 10 pp. 4724-4727, oct. 2009. crossref(new window)

8.
Bojan Stumberger, Tine Marcic and Miralem Hadziselimovic, "Direct Comparison of Induction Motor and Line-Start IPM Synchronous Motor Characteristics for Semi-Hermetic Compressor Drives," IEEE Trans. Industry Applications, vol. 48, no. 6, pp. 2310-2321, Nov. - Dec. 2012. crossref(new window)

9.
Tine Marcic, Bojan Stumberger and Gorazd Stumberger, "Comparison of Induction Motor and Line-Start IPM Synchronous Motor Performance in a Variable-Speed Drive," IEEE Trans. Industry Applications, vol. 48, no. 6, pp. 2341-2352, Nov. 2012. crossref(new window)

10.
Sajad Taravat, Abolfazl Halvaei Niasar and Ahmadreza Rabiee, "Sensorless Vector Control of Single Phase Line Start Permanent Magnet Motors (LSPMs)," Int. J. Science Advance and Technology, vol. 2, pp. 126-131, 2012.