JOURNAL BROWSE
Search
Advanced SearchSearch Tips
High Step-Up Converter with Hybrid Structure Based on One Switch
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
High Step-Up Converter with Hybrid Structure Based on One Switch
Hwu, K.I.; Peng, T.J.;
  PDF(new window)
 Abstract
A novel high step-up converter is presented herein, which combines the conventional buck-boost converter, the charge pump capacitor and the coupling inductor. By doing so, a quite high voltage conversion ratio due to not only the turns ratio but also the duty cycle, so as to increase design feasibility. It is noted that the denominator of the voltage conversion ratio is the square of one minus duty cycle. Above all, there is no voltage spike across the switch due to the leakage inductance and hence no passive or active snubber is needed, and furthermore, the used switch is driven without isolation and hence the gate driving circuit is relatively simple, thereby upgrading the industrial application capability of this converter. In this paper, the basic operating principles and the associated mathematical deductions are firstly described in detail, and finally some experimental results are provided to demonstrate the effectiveness of the proposed high step-up converter.
 Keywords
High step-up converter;Charge pump;Coupling inductor;One switch;
 Language
English
 Cited by
 References
1.
R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd ed., Norwell: KLuwer Academic Publishers, 2001.

2.
N. Mohan, T. M. Undeland and W. P. Robbins, Power Electronics, 2nd ed. New York: Wiley, 2003.

3.
B. R. Lin, F. Y. Hsieh and J. J. Chen, “Analysis and implementation of a bidirectional converter with high converter ratio,” IEEE ICIT’08, pp.1-6, 2008.

4.
K.B. Park, G.W. Moon and M.J. Youn, “Nonisolated high step-up stacked converter based on boost-integrated isolated converter,” IEEE Transactions on Power Electronics, vol. 26, no. 2, pp. 577-587, 2011. crossref(new window)

5.
Y. Deng, Q. Rong, Y. Zhao, J. Shi and X. He, “Single switch high step-up converters with built-in transformer voltage multiplier cell,” IEEE Transactions on Power Electronics, vol. 27, no. 8, pp. 3557-3567, 2012. crossref(new window)

6.
Wuhua Li, Weichen Li, Xiangning He, D. Xu and Bin Wu, “General derivation law of nonisolated high-step-up interleaved converters with built-in transformer,” IEEE Transactions on Industrial Electronics, vol. 59, no. 3, pp. 1650-1661, 2012. crossref(new window)

7.
C. M. Lai, C. T. Pan and M. C. Cheng, “High-efficiency modular high step-up interleaved boost converter for dc-microgrid applications,” IEEE Transactions on Industrial Electronics, vol. 48, no. 1, pp. 161-171, 2012.

8.
R. J. Wai and R. Y. Duan, “High-efficiency power conversion for low power fuel cell generation system,” IEEE Transactions on Power Electronics, vol. 20, no. 4, pp. 847-856, 2005. crossref(new window)

9.
L. S. Yang, T. J. Liang, H. C. Lee, and J. F. Chen, “Novel high step-up DC-DC converter with coupled-inductor and voltage-doubler circuits,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 4196-4206, 2011.

10.
C. T. Pan and C. M. Lai, “A high-efficiency high step-up converter with low switch voltage stress for fuel-cell system applications,” IEEE Transactions on Industrial Electronics, vol. 57, no. 6, pp. 1998-2006, 2010. crossref(new window)

11.
K. I. Hwu and Y. T. Yau, “KY converter and its derivatives,” IEEE Transactions on Power Electronics, vol. 57, no. 6, pp. 128-137, 2009.

12.
K. I. Hwu and Y. T. Yau, “A KY boost converter,” IEEE Transactions on Power Electronics, vol. 25, no. 11, pp. 2699-2703, 2010. crossref(new window)

13.
K. I. Hwu, K. W. Huang and W. C. Tu, “Step-up converter combining KY and buck-boost converters,” IET Electronics Letters, vol. 47, no. 12, pp. 722-724, 2011. crossref(new window)

14.
K. I. Hwu and Y. T. Yau, “Inductor-coupled KY boost converter,” IET Electronics Letters, vol. 46, no. 24, pp. 1624-1626, 2010. crossref(new window)

15.
K. I. Hwu and W. C. Tu, “Voltage-boosting converters with energy pumping,” IET Power Electronics, vol. 5, no. 2, pp. 185-195, 2012. crossref(new window)

16.
K. I. Hwu, Y. T. Yau and Y. H. Chen, “A novel voltage-boosting converter with passive voltage clamping,” IEEE ICSET’08, pp. 351-354, 2008.

17.
K. I. Hwu and Y. T. Yau, “Two types of KY buckboost converters,” IEEE Transactions on Industrial Electronics, vol. 56, no. 8, pp. 2970-2980, 2009. crossref(new window)

18.
Wuhua Li, Weichen Li, Yan Deng and Xiangning He, “Single-stage single-phase high-step-up ZVT boost converter for fuel-cell microgrid system,” IEEE Transactions on Power Electronics, vol. 25, no.12, pp. 3057-3065, 2010. crossref(new window)

19.
Wuhua Li, Yi Zhao, Yan Deng and Xiangning He, “Interleaved converter with voltage multiplier cell for high step-up and high efficiency conversion,” IEEE Transactions on Power Electronics, vol. 25, no. 9, pp. 2397-2408, 2010. crossref(new window)