JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Electrical and Thermal Characterization of Organic Varnish Filled with ZrO2 Nano Filler Used in Electrical Machines
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Electrical and Thermal Characterization of Organic Varnish Filled with ZrO2 Nano Filler Used in Electrical Machines
Selvaraj, D. Edison; Vijayaraj, R.; Sugumaran, C. Pugazhendhi;
  PDF(new window)
 Abstract
In the last decade it has been witnessed significant developments in the area of nano particles and nano scale fillers on electrical, thermal, and mechanical properties of polymeric materials such as resins, varnishes, enamel and bakelites. The electric and thermal properties were more important in the electrical equipments for both steady state and transient state conditions. This paper deals with the characterization of the electric and thermal properties of the pure varnish and zirconia (ZrO2) filler mixed varnish. The electric properties such as dielectric loss (tan δ), dielectric constant (ε), dielectric strength and partial discharge voltage were analyzed and detailed for different samples. It was observed that zirconia nano filler mixed varnish has the superior dielectric and thermal properties when compared to those of standard varnish. It has shown that at power frequency the 1wt% nano composite sample has the higher permittivity value when compared to other samples. It has been examined that the 1wt% sample was having higher inception and extinction voltages when compared to other samples. It has been observed that 1wt% sample has higher dielectric strength when compared with other samples. There has been an improvement of thermal property by adding few weight percent of zirconia nano fillers. There was not much variation in glass transition among the nano mixed composites. The weight loss was improved at 1wt% of the zirconia nano fillers.
 Keywords
Zirconia;Nano fillers;Varnish;Dielectric strength;TGA;
 Language
English
 Cited by
 References
1.
C.P. Sugumaran, M.R. Mohan and K. Udhaya kumar, IEEE Trans. Dielectric Insulation 17, 1682 (2010). crossref(new window)

2.
Ngugen et al., Investigations on dielectric propertied of enamelled wires with nano filled varnish for rotating machines fed by Inverters, Proc IEEE electrical Conf.(2009), pp. 66-71.

3.
T. Imai et al., Nano- and micro-filler combination enabling practical use of nano composite insulating materials, Proc. Int. Symp. Electrical Insulating Materials(2008), pp. 19-23.

4.
H. Kirchi, M. Serkam and K. Kopisetty, Nano-dielectric materials in electrical Insulation application, 31st Annual Conf. IEEE Industrial Electronics Society, IECON 2005 (2005), pp.52-57.

5.
G. Zhang et al., Study of nano TiO2 filler in the Corona-resistant magnetic wire insulation performance of Inverter-fed motor, Proc. Int. Sym. Electrical Insulating materials (2005), pp.597-601.

6.
Guostavino et al., Characterization of nano filled epoxy varnish subjected to surface partial discharges, IEEE Annual Report Conf. Electrical Insulation and Die-lectric phenomena (2007), pp.175-181.

7.
K. Inuzukal, H. Inanol and N. Hayakawal, Partial discharge Characteristics of nano Composite enamelled wire for Inverter –fed motor, Annual Report Conf.Electrical Insulation and Dielectric phenomena (2006), pp.594-598.

8.
M. Kozako, N. Fuseand Y. Ohki, IEEE Trans. Dielectri. Electr. Insul. 00,1833 (2004).

9.
N. Hayakawa and H. Okubo, IEEE Electr. Insul. may. 24-23(2008).

10.
T. Imai et al., IEEE Trans. Dielectric Electric Insulation, 13, 319 (2006). crossref(new window)

11.
T. Imai et al., Improving Epoxy-based Insulating Materials with Nano-fillers Toward Practical Application, IEEE Int. Sym. Electrical Insulation (2008), pp 37-42.

12.
D. Edison Selvaraj et al., International Journal of Nano Science, Analysis of Dielectric And Thermal Properties of Polyamide Enamel Filled With Carbon Nano tubes.Vol. 12 (2013), pp. 1350021-1-8. crossref(new window)

13.
Edison Selvaraj, D., C. Pugazhendhi Sugumaran, and A. Sivaprakash, Characterization of Electrical and Thermal Properties of Enamel Filled with Carbon Nanotubes, Proceedings of the Third International Conference on Trends in Information, Telecommunication and Computing. Springer New York, 496-502,2012.