Publisher : The Korean Institute of Electrical Engineers
DOI : 10.5370/JEET.2015.10.4.1786
Title & Authors
Experimence Study of Trace Water and Oxygen Impact on SF6 Decomposition Characteristics Under Partial Discharge Zeng, Fuping; Tang, Ju; Xie, Yanbin; Zhou, Qian; Zhang, Chaohai;
It is common practice to identify the insulation faults of GIS through monitor the contents of SF6 decomposed components. Partial discharges (PD) could lead to the decomposition of SF6 dielectric, so new reactions usually occur in the mixture of the newly decomposed components including traces of H2O and O2. The new reactions also cause the decomposed components to differ due to the different amounts of H2O and O2 even under the same strength of PD. Thus, the accuracy of assessing the insulation faults is definitely influenced when using the concentration and corresponding change of decomposed components. In the present research, a needle-plate electrode was employed to simulate the PD event of a metal protrusion insulation fault for two main characteristic components SO2F2 and SOF2, and to carry out influence analysis of trace H2O and O2 on the characteristic components. The research shows that trace H2O has the capability of catching an F atom, which inhibits low-sulfide SFx from recombining into high-sulfide SF6. Thus, the amount of SOF2 strongly correlates to the amount of trace H2O, whereas the amount of SO2F2 is weakly related to trace H2O. Furthermore, the dilution effect of trace O2 on SOF2 obviously exceeds that of SO2F2.
Partial discharge;;Decomposed component concentration;Trace and ;Influence regularity;
Sauers, “By-Product Formation in Spark Breakdown of SF6/O2 Mixtures,” Plasma Chemistry and Plasma Processing, vol. 8, no. 2, pp. 247-262, Jun. 1988.
R. J. Van Brunt, “Processes Leading to SF6 Decomposition in Glow-Type Corona Discharges,” Physics of Ionized Gases, pp. 161-172, 1989.
R. J. Van Brunt, L. W. Sieck, I. Sauers, and M. C. Siddagangappa, “Transfer of F− in the Reaction of SF6− with SOF4: Implications for SOF4 Production in Corona Discharges,” Plasma Chemistry and Plasma Processing, vol. 8, no. 2, pp. 225-246, Jun. 1988.
C. Pradayrol, A.M. Casanovas, C. Aventin, J. Casanovas, “Production of SO2F2, SOF4, (SOF2+SF4), S2F10, S2OF10 and SO2F10 in SF6 and (50-50) SF6-CF4 Mixtures Exposed to Negative Coronas,” Journal of Physics D-Applied Physics, vol. 30, no. 9, pp. 1356-1369, May. 1997.
A. M. Casanovas, J. Casanovas, F. Lagarde, and A. Belarbi, “Study of the Decomposition of SF6 under DC Negative Polarity Corona Discharges (Point-to-PlaneGeometry) - Influence of the Metal Constituting the Plane Electrode,” Journal of Applied Physics, vol. 72, no. 8, pp. 3344-3354, Oct. 1992.
F. Y. Chu, “SF6 Decomposition in Gas-insulated Equipment,” IEEE Trarnsactions on Electrical Insulatiorn, vol. 21, no. 5, pp. 693-725, Oct. 1986.
R. J. Van Brunt and J. T. Herron, “Fundamental Processesof SF6 Decomposition and Oxidation in Glow and Corona Discharges,” IEEE Transactions on Electrical Insulation, vol. 25, pp. 75-94, Feb. 1990.
R. J. Van Brunt and J. T. Herron, “Plasma Chemical-Model for Decomposition of SF6 in a Negative Glow Corona Discharge,” Physica Scripta, vol. T53, pp. 9-29, 1994.
Ju Tang, Fuping Zeng, Jianyu Pan, et al. “Correlation Analysis Between Formation Process of SF6 Decomposed Components and Partial Discharge Qualities,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, pp. 864-875, 2013.
Fuping Zeng, Ju Tang, Qingtao Fan, Jianyu Pan, Xiaoxing Zhang et al. Decomposition Characteristics of SF6 under Thermal Fault for Temperature below 400℃[J]. IEEE Transactions on Dielectrics andElectrical Insulation, Vol. 21, No. 3, pp: 995-1004, 2014
Ju Tang, Fuping Zeng, Xiaoxing Zhang, Jianyu Pan et al. Relationship between Decomposition Gas Ratios and Partial Discharge Energy in GIS, and the Influence of Residual Water and Oxygen[J]. IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 21, No. 3, pp: 1226-1234, 2014
IEC60480-2004, "Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use," 2004.
R. J. Van Brunt and M. C. Siddagangappa, “Identification of Corona Discharge-Induced SF6 Oxidation Mechanisms Using SF6/(18O2)/(H216O) and SF6/(16O2)/(H218O) Gas-Mixtures”, Plasma Chemistry and Plasma Processing, vol. 8, no. 2, pp. 207-223, Jun. 1988.
James H. Espenson, “Chemical Kinetics and Reaction Mechanism,” McGraw-Hill Press, Inc., New York, Ch.2, pp. 39-56, 1995.
A. Derdouri, J. Casanovas, R. Hergli, R. Grob, and J. Mathieu, “Study of the Decomposition of Wet SF6, Subjected to 50-Hz AC Corona Discharges,” Journal of Applied Physics, vol. 65, no. 5, pp. 1852-1857, Mar. 1989.
Tang Ju, Liu Fan, “Partial Discharge Recognition by Analysis of SF6 Decomposition Products Part 1: Decomposition Characteristic of SF6 under Four Different Partial Discharges,” IEEE Trans. Dielectrics and Electrical Insulation, vol. 19, no. 1, pp. 29-36, Feb. 2012.
A. M. Casanovas, I. Coll, and J. Casanovas, “Decomposition Products From Negative and 50 Hz AC Corona Discharges in Compressed SF6 and SF6/N2(10:90) Mixtures. Effect of Water Vapour Added to the Gas,” Journal of Physics D-Applied Physics, vol. 32, no. 14, pp. 1681-1692, Jul. 1999.
W. Tsang and J. T. Herron, “Kinetics and Thermodynamics of the Recation SF6 Reversible SF5 + F,” Journal of Chemical Physics, vol. 96, no. 6, pp. 4272-4282, Mar. 1992.
J. Shao, “Mathematical statistics,” World Publishing, Co., Ch.6, pp. 81-93, 2009.