Publisher : The Korean Institute of Electrical Engineers
DOI : 10.5370/JEET.2016.11.1.109
Title & Authors
Analytic Model of Four-switch Inverter-fed Driving System for Wye or Delta-connected Motor with Current Ripple Reduction Scheme Lee, Dong-Myung; Jung, Jin-Woo; Heo, Seo Weon; Kim, Tae Heoung;
This paper proposes an analytic model for four-switch inverter (FSI)-driven wye (Y) or delta (Δ)-connected motors with a current ripple reduction algorithm. FSIs employ four switches in controlling three-phase load instead of using six switches. They have split dc-link stage, and due to this inherent structure there exists the voltage difference between upper and lower capacitors, which results in distortion of the inverter output voltage. To study characteristics of FSIs, this paper presents an advanced simulation models of FSI-driven control system for 3-phase motor that can has a wire connection either Y or Δ. In addition, this paper introduces a current ripple reduction scheme that mitigates degradation of control performance due to the voltage difference between the dc-link capacitors. The validity of the proposed method and the analytic model is verified by simulations and experiments carried out with 1-HP induction machine with Y or Δ-connection
Simulation model;Four-Switch Inverter (FSI);Ripple compensation;Wye or delta-connected motor;
M.H. Soreshjani, R. Heidari, and A. Ghafari, “The application of classical Direct Torque and Flux Control (DTFC) for line-start permanent magnet synchronous and its comparison with permanent magnet synchronous motor,” Journal of Electrical Eng. and Tech., Vol. 9, No. 6, pp. 1954-1959, 2014.
T.H. Kim and J. Lee, “Influence on brushless DC motor performance due to signal distortion of the position sensor and DC link voltage ripple,” Inter. Journal of Applied Electro. and Mech., Vol. 19, pp. 287-291, 2004.
D.M. Lee and W.C. Lee, “Analysis of relationship between abnormal current and position detection error in sensorless controller for interior permanent magnet BLDC motors,” IEEE Trans. Magnetics, Vol. 44, No. 8, pp. 2074-2081, Aug. 2008.
H. Broeck, and J. Wyk, “A comparative investigation of a three-phase induction machine with a component minimized voltage-fed inverter under different control options,” IEEE Trans. Industry Appli., Vol. 20, No. 2, pp. 309-320, Mar./Apr. 1984.
F. Blassbjerg, H. Kragh, D.O. Neacsu, and J.K. Pedersen, “Comparison of modulation strategies for B4-inverters,” Euro. Power Electr. and Drives Assoc., Vol. 2, pp. 378-385, 1997.
C.B. Jacobina, and B.R. Correa, “Induction motor drive system for low-power applications,” IEEE Trans. Industry Appli., Vol. 35, No. 1, pp. 52-61, Jan./Feb. 1999.
F. Blaabjerg, D. O. Neacsu, and J. K. Pederson, “Adaptive SVM to compensate dc-link voltage ripple for four-switch three-phase voltage-source inverter,” IEEE Trans. Power Elect., Vol. 14, No. 4, pp. 743-752, July 1999.
D.M. Lee, J.B. Park, and H.A. Toliyat, “A simple current ripple reduction method for B4 inverters,” Journal of Electrical Eng. and Tech., Vol. 8, No. 5, pp. 1062-1069, 2013.
J. H. Kim, J. S. Hong, and K. H. Nam, “A current distortion compensation scheme for four-switch inverters,” IEEE Trans. Power Elect., Vol. 24, No. 4, pp. 1032-1040, April 2009.
D.M. Lee, “Motor control method for four-switch inverters with dc-link voltage ripple compensation algorithm,” Journal of Korean Institute of Illum. and Elect. Instal. Engineers, Vol. 27, No. 7, pp. 59-66, 2013.
B.A. Welchko, T.A. Lipo, T.M. Jahns, and S.E. Schulz, “Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations,” IEEE Trans. Power Elect., Vol. 19, No. 4, pp. 1108-1116, July 2004.
Y. Hu, L. Zhang, W. Huang, and F. Bu, "A fault-tolerant induction generator system based on instantaneous torque control," IEEE Trans. Energy Conv., Vol. 25, No. 2, pp. 412-421, June 2010.
K.D. Hoang, Z.Q. Zhu, and M.P. Foster, “Influence and compensation of inverter voltage drop in direct torque-controlled four-switch three-phase PM brushless AC drives,” IEEE Trans. Power Elect., Vol. 26, No. 8, pp. 2343-2357, Aug. 2011.
S. Dasgupta, S.N. Mohan, S.K. Sahoo, and S.K. Panda, “Application of four-switch-based three-phase grid- connected inverter to connect renewable energy source to a generalized unbalanced microgrid system,” IEEE Trans. Industrial Elect., Vol. 60, No. 3, pp. 1204-1215, March 2013.
C.H. Ong, “Dynamic simulation of electric machinery,” Prentice Hall, New Jersey, 1998, pp. 224-229.