JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Fast Detection Algorithm for Voltage Sags and Swells Based on Delta Square Operation for a Single-Phase Inverter System
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Fast Detection Algorithm for Voltage Sags and Swells Based on Delta Square Operation for a Single-Phase Inverter System
Lee, Woo-Cheol; Sung, Kook-Nam; Lee, Taeck-Kie;
  PDF(new window)
 Abstract
In this paper, a new sag and peak voltage detector is proposed for a single-phase inverter using delta square operation. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on d-q transformations using an all-pass filter (APF). The d-q transformation is typically used in the three-phase coordinate system. The APF generates a virtual q-axis voltage component with a 90° phase delay, but this virtual phase cannot reflect a sudden change in the grid voltage at the instant the voltage sag occurs. As a result, the peak value is drastically distorted, and it settles down slowly. A modified APF generates the virtual q-axis voltage component from the difference between the current and the previous values of the d-axis voltage component in the stationary reference frame. However, the modified APF cannot detect the voltage sag and peak value when the sag occurs around the zero crossing points such as 0° and 180°, because the difference voltage is not sufficient to detect the voltage sag. The proposed algorithm detects the sag voltage through all regions including the zero crossing voltage. Moreover, the exact voltage drop can be acquired by calculating the q-axis component that is proportional to the d-axis component. To verify the feasibility of the proposed system, the conventional and proposed methods are compared using simulations and experimental results.
 Keywords
Sag and Peak Detector;All-Pass Filter (APF);Digital Phase-Locked Loop (DPLL);
 Language
English
 Cited by
 References
1.
R. Naidoo, P. Pilay, "A New Method of Voltage Sag and Swell Detection," IEEE Trans. on Power Delivery, Vol. 22, No. 2, pp. 10561063, Apr. 2007. crossref(new window)

2.
N. Woodley, L. Morgan, A. Sundaram, "Experience with an inverter-based dynamic voltage restorer," IEEE Trans. on Power Delivery, Vol. 14, No. 3, pp. 11811186, July. 1999. crossref(new window)

3.
W. Lee, D. Lee, T. Lee, "New Control Scheme for a Unified Power Quality Compensator-Q with Minimum Active Power Injection," IEEE Trans. on Power Delivery, Vol. 25, No. 2, pp. 10681076, Apr. 2010.

4.
W. Lee, W. Lee, T. Lee, "Integrated inverter system for compensation of Power Quality events," Power Electronics Specialists Conference, pp. 37543759, June. 2008.

5.
N. Tuaboylu, E. Collins, P. Chaney, "Voltage Disturbance Evaluation Using the Missing Voltage Technique", Harmonics and Quality of Power, Vol. 1, pp. 577582, 1998.

6.
M. Gonzalez, V.Cardenas, R. Alvarez, “A Fast Detection Algorithm for Sags, Swells, and Inter-ruptions Based on Digital RMS Calculation and Kalman Filtering,” in Proc. Int. Power Electronics Congress, pp. 1-6, Oct. 2006

7.
Z. Yao, L Xiao, “Seamless transfer of single-phase grid-interactive inverters between grid-connected and stand-alone modes,” IEEE Trans. on Power Electronics, Vol. 25, No. 6, pp. 1597-1603, 2010. crossref(new window)

8.
Y. Silla, Y. Kum, “An Improvement in Synchronously Rotating Reference Frame-Based Voltage Sag Detection under Distorted Grid Voltages,” Journal of Power Electronics, Vol. 8, No. 6, pp. 1283-1295, 2013.

9.
S. Lee, K. Sung, T. Lee, W. Lee "UPS/APF power conversion equipment with a seamless mode transfer," Energy Conversion Congress and Exposition (ECCE), pp. 2769 - 2776, May 2011.

10.
S. Lee, H. C, “Novel Fast Peak Detector for Single- or Three-phase Unsymmetrical Voltage Sags,” Journal of Electrical Engineering & Technology, Vol. 6, No. 5, pp. 658-665, Sep. 2011. crossref(new window)

11.
J. S. Kim, Y. S. Kim, “Single-phase Active Power Filter Based on Rotating Reference Frame Method for Harmonics Compensation,” Journal of Electrical Engineering & Technology, Vol. 3, No. 1, pp. 94-100, Mar. 2008. crossref(new window)