JOURNAL BROWSE
Search
Advanced SearchSearch Tips
A Design of Optimal Interval between Armatures in Long Distance Transportation PMLSM for End Cogging Force Reduction
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Design of Optimal Interval between Armatures in Long Distance Transportation PMLSM for End Cogging Force Reduction
Park, Eui-Jong; Jung, Sang-Yong; Kim, Yong-Jae;
  PDF(new window)
 Abstract
Although the permanent magnet linear synchronous motor is a motor useful for transportation systems thanks to its high speed, high acceleration and deceleration, the linear motor generally has armatures installed on the full length of the transport path. It results in the increase in material costs and manufacturing time. As a means to solve this problem a stationary discontinuous armature system is suggested. However, it involves the following two issues. The first issue is it is impossible to control the mover in the section where any armature is not installed as armatures are distributed. The second one is increasing cogging force due to the ends of the armatures. Therefore, this study aims to solve these problems by adjusting intervals between armatures to control the mover anywhere, and to design the interval between armatures optimally to minimize the end cogging force. The suitable distance was deduced. It addressed the problems and showed suitability for long distance transportation PMLSM.
 Keywords
Discontinuous armature;End cogging force;Interval between armature modules;Long distance transportation;
 Language
English
 Cited by
 References
1.
K. C. Lim, J.K. Woo, G. H. Kang, J. P. Hong, and G. T. Kim, “Detent force minimization techniques in permanent magnet linear synchronous motor,” IEEE Trans. on Magn., Vol. 38, No. 2, pp. 1157-1160, 2002. crossref(new window)

2.
R. Hellinger, and P. Mnich, “Linear motor-powered transportation: history, present status, and future outlook,” Proc. of the IEEE, Vol. 97, No. 11, pp. 1892-1900, 2009. crossref(new window)

3.
Ruiwu Cao, Ming Cheng, Mi, C.C., Wei Hua, “Influence of leading design parameters on the force performance of a complementary and modular linear flux-switching permanent-magnet motor,” Trans. Ind. Electron., Vol. 61, Is. 5, pp. 2165-2175, 2014. crossref(new window)

4.
Y. Kim, and H. Dohmeki, “Driving characteristics analysis of stationary discontinuous armature permanent magnet linear synchronous motor for factory automation systems,” Electrical engineering, Vol. 89, No. 8, pp. 617-627, 2007. crossref(new window)

5.
T. Yoshimura, H.J. Kim, M. Watada, S. Torii, D. Ebihara, “Analysis of the reduction of detent force in a permanent magnet linear synchronous motor,” IEEE Trans. On Magn., Vol. 31, No. 6, pp. 3728-3730, 1995. crossref(new window)