JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Characteristic Analysis and Experimental Verification of the Axially Asymmetric Structured Outer-Rotor Type Permanent Magnet Motor
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Characteristic Analysis and Experimental Verification of the Axially Asymmetric Structured Outer-Rotor Type Permanent Magnet Motor
Seo, Myung-Ki; Lee, Tae-Yong; Park, Kyungsoo; Kim, Yong-Jae; Jung, Sang-Yong;
  PDF(new window)
 Abstract
In this study, we have dealt with a design characteristic of outer-rotor type permanent magnet (PM) motor applied for Engine Cooling Fan (ECF). When we design a motor with structure like this type, it is required as a requisite to consider 3-Dimensional (3-D) effect by implementing a non-linear Finite Element Analysis (FEA) due to a yoke-ceiling, which is perpendicular to the axis of rotation. We have analyzed identical models under three different conditions. The analysis has been performed through a non-linear 2-Dimensional (2-D) and 3-D FEA. Finally, the results have been compared with Back Electro-Motive Force (BEMF) value of actual motor model. As a result, a yoke-ceiling function as an additional flux path and the operating point on B-H curve of rotor material is shifted to non-saturation region relatively. Accordingly, magnetic flux linkage can be increased and motor size can be decreased under same input condition to satisfy ECF specification, such as torque.
 Keywords
Permanent Magnet;Yoke-ceiling;Flux linkage;Saturation;Back electro-motive force;Magnetic flux density;
 Language
English
 Cited by
 References
1.
C. I. Lee, and C. H. Jang, “Experimental Measurement and Simulated Verification of the Unbalanced Magnetic Force in Brushless DC Motors,” IEEE Trans. Magn., vol. 44, no. 11, pp. 4377-4380, Nov. 2008. crossref(new window)

2.
G. H. Jang, J.W. Yoon, N. Y. Park, and S. M. Jang, “Torque and Unbalanced Magnetic Force in a Rotational Unsymmetric Brushless DC Motors” IEEE Tans. Magn., vol. 32, no. 5, pp. 5157-5159, Sep. 1996. crossref(new window)

3.
Yon-Do Chun, Ju Lee, and Shinji Wakao, “Overhang Effect Analysis of Brushless DC Motor by 3-D Equivalent Magnetic Circuit Network Method,” IEEE Trans. Magn., vol. 39, no. 3, pp. 1610-1613, May. 2003. crossref(new window)

4.
Jung-Moo Seo, In-Soung Jung, Hyun-Kyo Jung, and Jong-Suk Ro, “Analysis of Overhang Effect for a Surface-Mounted Permanent Magnet Machine Using a Lumped Magnetic Circuit Model,” IEEE Trans. Magn., vol. 50, no. 5, pp. 1119-1123, May. 2014.

5.
J. Y. Kim, S. J. Sung, and G. H. Jang, “Characterization and Experimental Verification of the Axial Unbalanced Magnetic Force in Brushless DC Motors,” IEEE Trans. Magn., vol. 48, no. 11, pp. 3001-3004, Nov. 2012. crossref(new window)

6.
S. J. Sung, G. H. Jang, J. W. Jang, J. Y. Song, and H. J. Lee, “Vibration and Noise in a HDD Spindle Motor Arising from the Axial UMF Ripple,” IEEE Trans. Magn., vol. 49, no. 6, pp. 2489-2494, Jun. 2013. crossref(new window)

7.
Andrej Burakov, and Antero Arkkio, “Comparison of the Unbalanced Magnetic Pull Mitigation by the Parallel Paths in the Stator and Rotor Windings,” IEEE Trans. Magn., vol. 43, no.12, pp. 4083-4088, Dec. 2007. crossref(new window)

8.
G. H. Jang, J. W. Yoon, K. C. Ro, N. Y. Park, and S. M. Jang, “Performance of a Brushless DC Motor due to the Axial Geometry of the Permanent Magnet,” IEEE Trans. Magn., vol. 33, no. 5, pp. 4101-4103, Sep. 1997. crossref(new window)

9.
Richard Perers, Urban Lundin, and Mats Leijon, “Saturation Effects on Unbalanced Magnetic Pull in a Hydroelectric Generator With an Eccentric Rotor,” IEEE Trans. Magn., vol. 43, no. 10, pp. 3884-3890, Oct. 2007. crossref(new window)

10.
G. H. Jang, and J. W. Yoon, “Three Dimensional Analysis of Magnetic Force and Torque in a BLDC Motor due to the Axial Variation of Yoke and Pole,” IEEE Trans. Magn., vol. 35, no. 5, pp. 3694-3696, Sep. 1999. crossref(new window)