JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Study on Sliding Wear Characteristics and Processing of MoSi
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Study on Sliding Wear Characteristics and Processing of MoSi
Park, Sungho; Park, Wonjo; Huh, Sunchul;
  PDF(new window)
 Abstract
In this study, a monolithic MoSi2 matrix reinforced with 20 vol% SiC particles, a SiC/MoSi2 composite matrix reinforced with 20 vol% ZrO2 particles, and a ZrO2/MoSi2 composite were fabricated using hot press sintering at for 1 h under a pressure of 30 MPa. The Vickers hardness and sliding wear resistance of the monolithic MoSi2, ZrO2/MoSi2, and SiC/MoSi2 composite were investigated at room temperature. A wear behavior test was carried out using a disk-type wear tester with a silicon nitride ball. The ZrO2/MoSi2 composite showed an average Vickers hardness value and excellent wear resistance compared with the monolithic MoSi2 and SiC/MoSi2 composite at room temperature.
 Keywords
Friction coefficient;Monolithic MoSi2;Scanning Electron Microscopy;Sliding wear resistance;
 Language
English
 Cited by
 References
1.
A. K. Ghosh, A. Basu and H. Kung, Intermetallic Matrix Composites II, MRS, Pittsburg, pp. 259-266

2.
A. K. Vasudevan and J. J. Petrovic, Materials Science and Engineering, A261, 1-5 (1992)

3.
R. Bhatti, A. J. Pritchard and B. Mortimer, The American Ceramic Society, High- Temperature Ceramic-Matrix Composites II, 181-186 (1995)

4.
C. He, Y. S. Wang, J. S. Wallace and S. M. Hsu, wear 162-164, 314-321 (1993) crossref(new window)

5.
C. P. Dogan and J. A. Hawk, wear 212, 110-118 (1997) crossref(new window)

6.
D. Wang, J. Li and Z. Mao, wear 165, 159-167 (1993) crossref(new window)

7.
F. D. Gac and J. J. Petrovic, J. Am. Ceram. Soc. 68 (8), C200-C201 (1985)

8.
Hwan Cheol Kim, Choong Do Park, Jeong Wung Jeong and In Jin Shon, METALS AND MATERIALS International, Vol. 9, No. 2, 173-178 (2003) crossref(new window)

9.
J. A. Kawk and D. E. Alman, Scripta Metallugica et Materialia, 32 [5] 725-730 (1995) crossref(new window)

10.
J. J. Petrovic, A. K. Bhattacharya, R. E. Honnell, T. E. Mitchel, R. K. Wade and K. J. McClellan, Sci. and Eng. A 155, 259-266 (1992) crossref(new window)

11.
J. J. Petrovic, Intermetallics, 8, 1175-1182 (2000) crossref(new window)

12.
J. J. Petrovic, R. E. Honnel, T. E. Mitchell, R. K. Wade and K. J. McClellan, Ceram. Eng. Sci. porc.12, 1633-1642 (1991) crossref(new window)

13.
Lan Sun and Jinsheng Pan, Materials Letters 53, 63-67 (2002) crossref(new window)

14.
M. Yamaguchi, H. Inui and K. Ito, Acta Mater., 48, 307-322 (2000) crossref(new window)

15.
P. S. Tantri, E. M. Jayasingh, S. K. Biswas and S. K. Ramasesha, Materials Science & Engineering, A336, 64-71 (2002)