JOURNAL BROWSE
Search
Advanced SearchSearch Tips
CHARACTERISTICS AND STRENGTH EVALUATION OF THE MIXED MATERIAL OF FLY ASH FROM MUNICIPAL SOLID WASTE INCINERATOR AND THE RECYCLED POLYPROPYLENE
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Environmental Engineering Research
  • Volume 11, Issue 5,  2006, pp.257-265
  • Publisher : Korean Society of Environmental Engineering
  • DOI : 10.4491/eer.2006.11.5.257
 Title & Authors
CHARACTERISTICS AND STRENGTH EVALUATION OF THE MIXED MATERIAL OF FLY ASH FROM MUNICIPAL SOLID WASTE INCINERATOR AND THE RECYCLED POLYPROPYLENE
Park, Sang-Min; Kim, Hwan-Gi;
  PDF(new window)
 Abstract
The purpose of research is to mix the fly ash from municipal solid waste incinerator in the recycled Polypropylene and to recycle. The specimen was produced by mixing 20 wt.% of MSWI fly ash at maximum in the recycled Polypropylene and the particle size analyzer, DSC, TGA, SEM and UTM instruments were used to analyze the physical chemical properties of the specimen. As a result of measurement, the average particle size of MSWI fly ash was . In TGA analysis, the temperature of specimen S-5 at 50% of weight decrease was risen by higher than specimen S-1. In UTM measurement, specimen S-2 showed the maximum strength for tensile strength and specimen S-3 showed the maximum strength for flexural strength. But, impact strength was decreased according to the increasing proportion of MSWI fly ash. In conclusion, when the proper amount of MSWI fly ash was added to the recycled Polypropylene, thermal endurance, tensile strength and flexural strength could be increased, but impact strength was decreased.
 Keywords
MSWI fly ash;Rcycled Polypropylene;Recycle;Specimen;
 Language
English
 Cited by
1.
소각비산재와 일차점토, 카올리나이트로 제작된 시편의 특성 및 평가,박상민;유승철;

한국폐기물자원순환학회지, 2008. vol.25. 3, pp.187-195
2.
Sintering process에 의한 MSWI fly ash를 혼합한 일차점토(一次粘土)와 적황토(赤黃土) 공시체(公試體)의 특성(特性),유승철;권문선;박상민;

자원리싸이클링, 2010. vol.19. 2, pp.10-18
3.
다양한 입자크기 및 표면개질 버텀애쉬를 이용한 폴리에틸렌/버텀애쉬 복합소재의 특성,최재원;김하연;정용찬;전병철;

한국섬유공학회지, 2013. vol.50. 1, pp.68-74 crossref(new window)
1.
Recycling and surface modification of waste bottom ash from coal power plants for the preparation of polypropylene and polyethylene composites, Journal of Material Cycles and Waste Management, 2015, 17, 4, 781  crossref(new windwow)
2.
Properties of Polyethylene/Bottom Ash Composites Using Various Particle Size and Surface-modified Bottom Ash, Textile Science and Engineering, 2013, 50, 1, 68  crossref(new windwow)
 References
1.
Kim, Jin Beam, L. W. K., and S. Y. J., 'A Basic Study on the Effective Management for MSWI fly ash(II),' J. of KSEE, 22(7), 1357-1364(2000)

2.
National Municipal Wastes Incineration Management Association, Municipal Wastes Incineration Management situation, The Ministry of Environment(2003, 2004)

3.
Cheong, Cheong Jo, P. S. S., and K. H. G., 'A Study on the Charicteristics of Recycled Plastics filled with Sludge Ash,' J. of KSWM, 13(2), 247-255(1996)

4.
Cheong, Cheong Jo., Kim Young Kyu, 'Engineering Charicteristics of Waste Plastics Mixed with the Paper Mill Sludge Ash,' Korean Society of Civil Engineers, 23(2B), 171-175(2004)

5.
Kim, Hyeok jung, 'A Study on the Mechanical Properties of Concrete Using Fly ash from Municipal Solid Waste Incinerator,' Chonbuk National Univ., thesis for master's degree(2005)

6.
Lee, J. H., Park, H. S, An. J. G, Lee, Y. H., Kim. Y. S., Lee, Y. K., Nam, and J. D., 'Flame Retardancy and Mechanical Property of Polypropylene/Nylon Nanocomposite Reinforced with Montmorillonite', Polymer(Korea), 27(6), 576-582(2003)

7.
Y. Li, Q. F. Fang, Z. G. Yi, K. Zheng, 'A Study of internal friction in polypropylene(PP) filled with nanometer-scale $CaCO_{3}$ particles,' Materials Science and Engineering. A370. 268-272(2004)

8.
R. S. Hadal., and R. D. K. Misra, 'The influence of loading rate and concurrent mirostructural evolution in micrometric talc-and wollastonite -reinforced high isotactic polypy lene composites,' Materials Science and Engineering, A374, 374-389(2004)

9.
Lee, P. W., and S, J. I., 'Mechanical Properties of Paper Sludge-Polypropylene Composites,' Mokchae Konghak, 27(3), 51-62 (1999)