Advanced SearchSearch Tips
Light Tar Decomposition of Product Pyrolysis Gas from Sewage Sludge in a Gliding Arc Plasma Reformer
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Environmental Engineering Research
  • Volume 17, Issue 2,  2012, pp.89-94
  • Publisher : Korean Society of Environmental Engineering
  • DOI : 10.4491/eer.2012.17.2.089
 Title & Authors
Light Tar Decomposition of Product Pyrolysis Gas from Sewage Sludge in a Gliding Arc Plasma Reformer
Lim, Mun-Sup; Chun, Young-Nam;
  PDF(new window)
Pyrolysis/gasification technology utilizes an energy conversion technique from various waste resources, such as biomass, solid waste, sewage sludge, and etc. to generating a syngas (synthesis gas). However, one of the major problems for the pyrolysis gasification is the presence of tar in the product gas. The tar produced might cause damages and operating problems on the facility. In this study, a gliding arc plasma reformer was developed to solve the previously acknowledged issues. An experiment was conducted using surrogate benzene and naphthalene, which are generated during the pyrolysis and/or gasification, as the representative tar substance. To identify the characteristics of the influential parameters of tar decomposition, tests were performed on the steam feed amount (steam/carbon ratio), input discharge power (specific energy input, SEI), total feed gas amount and the input tar concentration. In benzene, the optimal operating conditions of the gliding arc plasma 2 in steam to carbon (S/C) ratio, 0.98 in SEI, 14 L/min in total gas feed rate and 3.6% in benzene concentration. In naphthalene, 2.5 in S/C ratio, 1 in SEI, 18.4 L/min in total gas feed rate and 1% in naphthalene concentration. The benzene decomposition efficiency was 95%, and the energy efficiency was 120 g/kWh. The naphthalene decomposition efficiency was 79%, and the energy yield was 68 g/kWh.
Benzene;Gliding arc plasma;Naphthalene;Sewage sludge pyrolysis;Tar;
 Cited by
Observation of dynamic behavior of gliding arc discharge, The European Physical Journal Applied Physics, 2013, 61, 2, 24308  crossref(new windwow)
Milne TA, Evans RJ, Abatzoglou N. Biomass gasifier "Tars": their nature, formation, and conversion. Golden: National Renewable Energy Laboratory; 1998. NREL/TP-570-25357.

Hasler P, Nussbaumer T. Sampling and analysis of particles and tars from biomass gasifiers. Biomass Bioenergy 2000;18:61-66. crossref(new window)

Devi L, Ptasinski KJ, Janssen FJ. A review of the primary measures for tar elimination in biomass gasification processes. Biomass Bioenergy 2003;24:125-140. crossref(new window)

Bergman PC, van Paasen SV, Boerrigter H. The novel "OLGA" technology for complete tar removal from biomass producer gas. In: Expert Meeting on Pyrolysis and Gasification of Biomass and Waste; 2002 Sep 30 - Oct 1; Strasbourg, France.

Fjellerup J, Ahrenfeldt J, Henriksen U, Gobel B. Formation, decomposition and cracking of biomass tars in gasification. Lyngby: Technical University of Denmark; 2005. Technical report: MEK-ET-2005-05.

Devi L, Ptasinski KJ, janssen FJ. Pretreated olivine as tar removal catalyst for biomass gasifiers: investigation using naphthalene as model biomass tar. Fuel Process. Technol. 2005;86:707-730. crossref(new window)

Nair SA, Pemen AJ, Yan K, et al. Tar removal from biomassderived fuel gas by pulsed corona discharges. Fuel Process. Technol. 2003;84:161-173. crossref(new window)

Yang YC, Lee BJ, Chun YN. Characteristics of methane reforming using gliding arc reactor. Energy 2009;34:172-177. crossref(new window)

Sreethawong T, Thakonpatthanakun P, Chavadej S. Partial oxidation of methane with air for synthesis gas production in a multistage gliding arc discharge system. Int. J. Hydrog. Energy 2007;32:1067-1079. crossref(new window)

Chun YN, Song HO. Syngas production using gliding arc plasma. Energy Sources Part A Recovery Util. Environ. Eff. 2008;30:1202-1212.

Indarto A, Yang DR, Azhari CH, et al. Advanced VOCs decomposition method by gliding arc plasma. Chem. Eng. J. 2007;131:337-341. crossref(new window)

Du CM, Yan JH, Cheron B. Decomposition of toluene in a gliding arc discharge plasma reactor. Plasma Sources Sci. Technol. 2007;16:791-797. crossref(new window)

Kim HH, Oh SM, Ogata A, Futamura S. Decomposition of benzene using Ag/TiO2 packed plasma-driven catalyst reactor: influence of electrode configuration and Ag-loading amount. Catal. Lett. 2004;96:189-194. crossref(new window)

Cataldo F. Ultrasound-induced cracking and pyrolysis of some aromatic and naphthenic hydrocarbons. Ultrason. Sonochem. 2000;7:35-43. crossref(new window)

Burlica R, Kirkpatrick MJ, Finney WC, Clark RJ, Locke BR. Organic dye removal from aqueous solution by glidarc discharges. J. Electrostatics 2004;62:309-321. crossref(new window)

Yu L, Yan JH, Li XD, et al. Naphthalene decomposition by atmospheric gliding arc gas discharge. Proceedings of the 19th International Symposium on Plasma Chemistry; 2009 Jul 26-31; Bochum, Germany. International Plasma Chemistry Society; 2009.

Bo Z, Yan J, Li X, Chi Y, Cen K. Scale-up analysis and development of gliding arc discharge facility for volatile organic compounds decomposition. J. Hazard. Mater. 2008;155:494- 501. crossref(new window)