Publisher : Korean Society of Environmental Engineering
DOI : 10.4491/eer.2014.065
Title & Authors
Evolution, Fields of Research, and Future of Chemical-Looping Combustion (CLC) process: A Review Shahrestani, Masoumeh Moheb; Rahimi, Amir;
This study presents a review on Chemical looping combustion (CLC) development, design aspects and modeling. The CLC is in fact an unmixed combustion based on the transfer of oxygen to the fuel by a solid oxygen carrier material avoiding the direct contact between air and fuel. The CLC process is considered as a very promising combustion technology for power plants and chemical industries due to its inherent capability of capturing, which avoids extra separation costs of the of from the rest of flue gases. This review covers the issues related to oxygen carrier materials. The modeling works are reviewed and different aspects of modeling are considered, as well. The main drawbacks and future research and prospects are remarked.
Chemical looping combustion (CLC); capture;Gas-solid reaction kinetics;Oxygen carrier;
Planning and scheduling of CO2 capture, utilization and storage (CCUS) operations as a strip packing problem, Process Safety and Environmental Protection, 2016, 104, 358
Experimental investigation of CO2 capture using sodium hydroxide particles in a fluidized bed, Korean Journal of Chemical Engineering, 2016, 33, 4, 1278
Optimal CO2 allocation and scheduling in enhanced oil recovery (EOR) operations, Applied Energy, 2016, 184, 337
Adanez J, Abad A, Garcia-Labiano F, Gayan P, de D LF. Progress in chemical-looping combustion and reforming technologies. Prog. Energy Combust. Sci. 2012;38:215-282.
Hossain MM, de Lasa HI. Chemical-looping combustion (CLC) for inherent $CO_2$ separations-a review. Chem.Eng. Sci. 2008;63:4433-4451.
Kruggel-Emden H, Stepanek F, Munjiza A. A comparative study of reaction models applied for chemical looping combustion. Chem. Eng. Res. Des. 2011;89:2714-2727.
Leion H, Mattisson T, Lyngfelt A. The use of petroleum coke as fuel in chemical-looping combustion. Fuel 2007;86:1947-1958.
Dueso C, Ortiz M, Abad A, et al. Reduction and oxidation kinetics of nickel-based oxygen-carriers for chemical-looping combustion and chemical-looping reforming. Chem. Eng. J. 2012;188:142-154.
Mendiara T, Gayan P, Abad A, de Diego LF, Garcia-Labiano F, Adanez F. Performance of a bauxite waste as oxygen-carrier for chemical-looping combustion using coal as fuel. Fuel Process. Technol. 2013;109:57-69.
Abad A, Gayan P, de Diego LF, Garcia-Labiano F, Adanez J. Fuel reactor modelling in chemical-looping combustion of coal: 1. Model formulation. Chem. Eng. Sci. 2013;87:277-293.
Mattisson T, Lyngfelt A, Cho P. The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of $CO_2$. Fuel 2001;80:1953-1962.
Shen L, Zheng M, Xiao J, Zhang H, Xiao R. Chemical looping combustion of coal in interconnected fluidized beds. Sci. China Ser. E. 2007;50:230-240.
Lewis WK, Gilliland ER. Production of pure carbon dioxide. 1954, United state paptents 2665972.
Ishida M, Zheng D, Akehata T. Evaluation of a chemical-looping-combustion power-generation system by graphic exergy analysis. Energy 1987;12:147-154.
Ishida M, Jin H, $CO_2$ recovery in a power plant with chemical looping combustion. Energy Conver. Manage. 1997;38:S187-S192.
Anheden M, Svedberg G. Exergy analysis of chemical-looping combustion systems. Energy Convers. Manag. 1998;39:1967-1980.
Lyngfelt A, Leckner B, Mattisson T. A fluidized-bed combustion process with inherent $CO_2$ separation; application of chemical-looping combustion. Chem. Eng. Sci. 2001;56:3101-3113.
Ryabov GA, Folomeev OM, Litun DS, Sankin DA. Separation of carbon dioxide with the use of chemical-looping combustion and gasification of fuels. Thermal engineering 2009;56:489-499.
Fang H, Haibin L, Zengli Z. Advancements in development of chemical-looping combustion: a review. Int. J. Chem. Eng. 2009;2009:ID710515.
Guo Q, Zhang J, Tian H. Recent Advances in $CaSO_4$ Oxygen Carrier for Chemical-Looping Combustion (CLC) Process. Chem. Eng. Commun. 2012;199:1463-1491.
Johansson M, Mattisson T, Lyngfelt A. Comparison of oxygen carriers for chemical-looping combustion. Therm. Sci. 2006;10:93-107.
Ryden M, Lyngfelt A, Mattisson T. Chemical-looping combustion and chemical-looping reforming in a circulating fluidized-bed reactor using Ni-based oxygen carriers. Energy Fuels 2008;22:2585-2597.
Abad A, Adanez J, Cuadrat A, Garcia-Labiano F, Gayan P, de Diego LF. Kinetics of redox reactions of ilmenite for chemical-looping combustion. Chem. Eng. Sci. 2011;66:689-702.
Cao Y, Pan W-P. Investigation of chemical looping combustion by solid fuels. 1. Process analysis. Energy Fuels 2006;20:1836-1844.
Guo Q, Liu Y, Tian H. Recent Advances on preparation and characteristics of oxygen carrier particles. I. Re. Ch. E. 2009;1:357-368.
Abad A, Adanez J, Garcia-Labiano F, de Diego LF, Gayan P, Celaya J. Mapping of the range of operational conditions for Cu-, Fe-, and Ni-based oxygen carriers in chemical-looping combustion. Chem. Eng. Sci. 2007;62:533-549.
Mattisson T, Jardnas A, Lyngfelt A. Reactivity of some metal oxides supported on alumina with alternating methane and oxygen application for chemical-looping combustion. Energy Fuels 2003;17:643-651.
Tian H, Guo Q, Chang J. Investigation into decomposition behavior of CaSO4 in chemical-looping combustion. Energy Fuels 2008;22:3915-3921.
Moghtaderi B, Song H. Reduction properties of physically mixed metallic oxide oxygen carriers in chemical looping combustion. Energy Fuels 2010;24:5359-5368.
Pans MA, Gayan P, Abad A, Garcia-Labiano F, de Diego LF, Adanez J. Use of chemically and physically mixed iron and nickel oxides as oxygen carriers for gas combustion in a CLC process. Fuel Process. Technol. 2013;115:152-163.
Siriwardane R, Tian H, Simonyi R, Poston J. Synergetic effects of mixed copper-iron oxides oxygen carriers in chemical looping combustion. Fuel 2013;108:319-333.
Hossain MM, de Lasa HI. Reduction and oxidation kinetics of Co-Ni/$Al_2O_3$ oxygen carrier involved in a chemical-looping combustion cycles. Chem. Eng. Sci. 2010;65:98-106.
Son SR, Kim SD. Chemical-looping combustion with NiO and $Fe_2O_3$ in a thermobalance and circulating fluidized bed reactor with double loops. Ind. Eng. Chem. Res. 2006;45:2689-2696.
Noorman S, van Sint Annaland M, Kuipers H. Packed bed reactor technology for chemical-looping combustion. Ind. Eng. Chem. Res. 2007;46:4212-4220.
Ryu H-J, Bae D-H, Jin G-T. Effect of temperature on reduction reactivity of oxygen carrier particles in a fixed bed chemical-looping combustor. Korean J. Chem. Eng. 2003;20:960-966.
Younas M, SWATI IK, Irshad A, ULLAH N, Ahmad MI. Performance study of a lab scale packed bed Chemical Looping Combustion reactor: Part a) Reduction cycle. Journal of the Pakistan Institute of Chemical Engineers 2012;40:101-108.
Dahl IM, Bakken E, Larring Y, Spjelkavik AI, Hakonsen SF, Blom R. On the development of novel reactor concepts for chemical looping combustion. Energy Proced. 2009;1:1513-1519.
Abad A, Adanez J, Garcia-Labiano F, de Diego LF, Gayan P. Modeling of the chemical-looping combustion of methane using a Cu-based oxygen-carrier. Combust. Flame 2010;157:602-615.
Kolbitsch P, Proll R, Hofbauer H. Modeling of a 120kW chemical looping combustion reactor system using a Ni-based oxygen carrier. Chem. Eng. Sci. 2009;64:99-108.
Pallares D, Johnsson F. Macroscopic modelling of fluid dynamics in large-scale circulating fluidized beds. Prog. Energy Combust. Sci. 2006.32:539-569.
Jung J, Gamwo IK. Multiphase CFD-based models for chemical looping combustion process: fuel reactor modeling. Powder Technol. 2008.183:401-409.
Deng ZG, Xiao R, Jin BS, Song QL, Huang H. Multiphase CFD modeling for a chemical looping combustion process (fuel reactor). Chem. Eng. Technol. 2008;31:1754-1766.
Moghtaderi B. Review of the Recent Chemical Looping Process Developments for Novel Energy and Fuel Applications. Energy Fuels 2012;26:15-40.