Advanced SearchSearch Tips
Comparative Study of Mass Transfer and Bubble Hydrodynamic Parameters in Bubble Column Reactor: Physical Configurations and Operating Conditions
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Environmental Engineering Research
  • Volume 19, Issue 4,  2014, pp.345-354
  • Publisher : Korean Society of Environmental Engineering
  • DOI : 10.4491/eer.2014.S1.013
 Title & Authors
Comparative Study of Mass Transfer and Bubble Hydrodynamic Parameters in Bubble Column Reactor: Physical Configurations and Operating Conditions
Sastaravet, Prajak; Chuenchaem, Chomthisa; Thaphet, Nawaporn; Chawaloesphonsiya, Nattawin; Painmanakul, Pisut;
  PDF(new window)
In this paper, effects of physical configurations and operating conditions on bubble column performance were analyzed in terms of bubble hydrodynamic and mass transfer parameters. Bubble column with 3 different dimensions and 7 gas diffusers (single / multiple orifice and rigid / flexible orifice) were applied. High speed camera and image analysis program were used for analyzing the bubble hydrodynamic parameters. The local liquid-side mass transfer coefficient () was estimated from the volumetric mass transfer coefficient () and the interfacial area (a), which was deduced from the bubble diameter () and the terminal bubble rising velocity (). The result showed that the values of kLa and a increased with the superficial gas velocity (Vg) and the size of bubble column. Influences of gas diffuser physical property (orifice size, thickness and orifice number) can be proven on the generated bubble size and the mass transfer performance in bubble column. Concerning the variation of coefficients with bubble size, 3 zones (Zone A, B and C) can be observed. For Zone A and Zone C, a good agreement between the experimental and the predicted coefficients was obtained (average difference of ), whereas the inaccuracy result (of ) was found in Zone B. To enhance the high coefficient and absorption efficiency in bubble column, it was unnecessary to generate numerous fine bubbles at high superficial gas velocity since it causes high power consumption with the great decrease of coefficients.
Bubble column;Bubble size;Interfacial area;Liquid-side mass transfer coefficient;Superficial gas velocity;Volumetric mass transfer coefficient;
 Cited by
Deckwer WD. Bubble column reactors. Chichester: John Wiley & Sons Ltd; 1992.

Bouaifi M, Hebrard G, Bastoul D, Roustan M. A comparative study of gas hold-up, bubble size, interfacial area and mass transfer coefficients in stirred gas-liquid reactors and bubble columns. Chem. Eng. Process. 2001;40:97-111. crossref(new window)

Hebrard G, Bastoul D, Roustan M. Influence of the gas spargers on the hydrodynamic behaviour of bubble columns. Chem. Eng. Res. Des. 1996;74:406-414.

Painmanakul P, Loubiere K, Hebrard G, Buffiere P. Study of different membrane spargers used in waste water treatment: characterisation and performance. Chem. Eng. Process. 2004;43:1347-1359. crossref(new window)

Vazquez G, Cancela MA, Varela R, Alvarez E, Navaza JM. Influence of surfactants on absorption of $CO_2$ in a stirred tank with and without bubbling. Chem. Eng. J. 1997;67:131-137. crossref(new window)

Akosman C, Orhan R, Dursun G. Effects of liquid property on gas holdup and mass transfer in co-current downflow contacting column. Chem. Eng. Process. 2004;43:503-509. crossref(new window)

Loubiere K, Hebrard G. Bubble formation from a flexible hole submerged in an inviscid liquid. Chem. Eng. Sci. 2003;58:135-148. crossref(new window)

Alves SS, Maia CI, Vasconcelos JMT. Gas-liquid mass transfer coefficient in stirred tanks interpreted through bubble contamination kinetics. Chem. Eng. Process. 2004;43:823-830. crossref(new window)

Kulkarni AA, Joshi JB. Simultaneous measurement of flow pattern and mass transfer coefficient in bubble columns. Chem. Eng. Sci. 2004;59:271-281. crossref(new window)

Painmanakul P, Loubiere K, Hebrard G, Mietton-Peuchot M, Roustan M. Effects of surfactants on liquid-side mass transfer coefficients. Chem. Eng. Sci. 2005;60:6480-6491. crossref(new window)

Rice RG, Lakhani NB. Bubble Formation at a puncture in a submerged rubber membrane. Chem. Eng. Commun. 1983;24:215-234. crossref(new window)

Loubiere K, Hebrard G. Influence of liquid surface tension (surfactants) on bubble formation at rigid and flexible orifices. Chem. Eng. Process. 2004;43:1361-1369. crossref(new window)

Lessard RR, Zieminski SA. Bubble coalescence and gas transfer in aqueous electrolytic solutions. Ind. Eng. Chem. Fund. 1971;10:260-269. crossref(new window)

Grace JR, Wairegi T. Properties and Characteristics of drops and bubbles. In: Encyclopedia of Fluid Mechanics, Cheremisinoff. Chap 3. Houston: Gulf Publ. Comp.; 1986. p. 43-57.

Sardeing R, Painmanakul P, Hebrard G. Effect of surfactants on liquid-side mass transfer coefficients in gas-liquid systems: A first step to modelling. Chem. Eng. Sci. 2006;61:6249-6260. crossref(new window)

Treybal RE. Mass Transfer Operations. 3rd ed. New York: McGraw-Hill; 1980.

Higbie R. The rate of absorption of a pure gas into a still liquid during short periods of exposure. Transactions of the American Institution of Chemical Engineers. 1935;31:365-389.