Advanced SearchSearch Tips
Amorphous Cr-Ti Texture-inducing Layer Underlying (002) Textured bcc-Cr alloy Seed Layer for FePt-C Based Heat-assisted Magnetic Recording Media
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of Magnetics
  • Volume 21, Issue 1,  2016, pp.35-39
  • Publisher : The Korean Magnetics Society
  • DOI : 10.4283/JMAG.2016.21.1.035
 Title & Authors
Amorphous Cr-Ti Texture-inducing Layer Underlying (002) Textured bcc-Cr alloy Seed Layer for FePt-C Based Heat-assisted Magnetic Recording Media
Jeon, Seong-Jae; Hinata, Shintaro; Saito, Shin;
  PDF(new window)
amorphous texture-inducing layers (TIL) were investigated to realize highly (002) oriented FePt-C granular films through hetero-epitaxial growth on the (002) textured bcc- seed layer (bcc-SL). As-deposited TILs showed the amorphous phase in Ti content of . Particularly, films with kept the amorphous phase against the heat treatment over . It was found that preference of the crystallographic texture for bcc-SLs is directly affected by the structural phase of TILs. (002) crystallographic texture was realized in bcc-SLs deposited on the amorphous TILs (), whereas (110) texture was formed in bcc-SLs overlying on crystalline TILs (x < 30 and x > 70). Correlation between the angular distribution of (002) crystal orientation of bcc-SL evaluated by full width at half maximum of (002) diffraction (FWHM) and a grain diameter of bcc-SL indicated that while the development of the lateral growth for bcc-SL grain reduces FWHM, crystallization of amorphous TILs hinders FWHM. FePt-C granular films were fabricated under the substrate heating process over with having different FWHM of bcc-SL. Hysteresis loops showed that squareness () of the films increased from 0.87 to 0.95 when FWHM of bcc-SL decreased from to . It is suggested that the reduction of (002) FWHM affects to the overlying MgO film as well as FePt-C granular film by means of the hetero-epitaxial growth.
amorphous Cr-Ti texture inducing layer;bcc-Cr alloy seed layer;lateral grain growth;hetero-epitaxial growth; FePt-C granular film;angular distribution of c-axis;
 Cited by
M. H. Kryder, E. C. Gage, T. W. McDaniel, W. A. Challener, R. E. Rottmayer, G. Ju, Y.-T. Hsia, and M. F. Erden, Proc. IEEE 96, 1810 (2008). crossref(new window)

A. Q. Wu, Y. Kubota, T. Klemmer, T. Rausch, C. Peng, Y. Peng, D. Karns, X. Zhu, Y. Ding, E. K. C. Chang, Y. Zhao, H. Zhou, K. Gao, J.-U. Thiele, M. Seigler, G. Ju, and E. Gage, IEEE Trans. Magn. 49, 779 (2013). crossref(new window)

X. Wang, K. Gao, H. Zhou, A. Itagi, M. Seigler, and E. Gage, IEEE Trans. Magn. 49, 686 (2013). crossref(new window)

Seong-Jae Jeon, Shintaro Hinata, Shin Saito, and Migaku Takahashi, J. Appl. Phys. 117, 17A924 (2015). crossref(new window)

Byung-Joo Lee, Metall. Trans. A 24, 1919 (1993). crossref(new window)

B. D. Cullity and S. R. Stork, Elements of X-ray Diffraction, Prentice Hall, New Jersey (2001) pp. 167-171.

S. Wicht, V. Neu, L. Schultz, V. Mehta, S. Jain, J. Reiner, O. Mosendz, O. Hellwig, D. Weller, and B. Rellinghaus, J. Appl. Phys. 117, 013907 (2015). crossref(new window)

J. Wang, S. Hata, Y. K. Takahashi, H. Sepehri-Amin, B.S.D.Ch.S. Varaprasad, T. Shiroyama, T. Schreflc, and K. Hono, Acta Mater. 91, 41 (2015). crossref(new window)