Advanced SearchSearch Tips
Indoor Positioning System using LED Lights and a Dual Image Sensor
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Indoor Positioning System using LED Lights and a Dual Image Sensor
Moon, Myoung-geun; Choi, Su-il; Park, Jaehyung; Kim, Jin Young;
  PDF(new window)
In recent years, along with the rapid development of LED technology, indoor positioning systems based on visible light communication (VLC) have been researched. In this paper, we propose an accurate indoor positioning method using white-light LEDs and a dual image sensor. Indoor LED lights are located at the ceiling in a room and broadcast information on their positions using VLC technology. A mobile device with a dual image sensor receives LED position information by VLC and estimates its position and azimuth angle. Simulation and experimental results are given to show the performance of the proposed indoor positioning system.
Optical wireless;Visible light communication;White-light LED;Indoor positioning;
 Cited by
Reversed Three-Dimensional Visible Light Indoor Positioning Utilizing Annular Receivers with Multi-Photodiodes, Sensors, 2016, 16, 12, 1254  crossref(new windwow)
H. Elgala, R. Mesleh, and H. Haas, “Indoor optical wireless communication: potential and state-of-the-art,” IEEE Commun. Mag. 49, 56-62 (2011).

T. Komine and M. Nakagawa, “Fundamental analysis for visible-light communication system using LED lightings,” IEEE Trans. Consum. Electron. 50, 100-107 (2004). crossref(new window)

IEEE Standard P802.15.7, Short-Range Wireless Optical Communication Using Visible Light (2011).

J. Grubor, S. Randel, K.-D. Langer, and J. W. Walewski, “Broadband information broadcasting using LED-based interior lighting,” IEEE J. Lightwave Technol. 26, 3883-3892 (2008). crossref(new window)

H.-D. Moon and S.-Y. Jung, “Multi-coded variable PPM for high data rate visible light communications,” J. Opt. Soc. Korea 16, 107-114 (2012). crossref(new window)

S.-I. Choi, “New type of white-light LED lighting for illumination and optical wireless communication under obstacles,” J. Opt. Soc. Korea 16, 203-209 (2012). crossref(new window)

H. Hong-gang, Z. Dan-dan, and T. Shuai, “Analysis of the LED lamp arrangement for uniformity of illumination in indoor VLC system,” J. Opt. Soc. Korea 18, 663-671 (2014). crossref(new window)

C. Sertthin, T. Ohtsuki, and M. Nakagawa, “6-axis sensor assisted low complexity high accuracy-visible light communication based indoor positioning system,” IEICE Trans. Commun. E93-B, 2879-2891 (2010). crossref(new window)

X. Liu, H. Makino, and K. Mase, “Improved indoor location estimation using fluorescent light communication system with a nine-channel receiver,” IEICE Trans. Commun. E93-B, 2936-2944 (2010). crossref(new window)

M. Yoshino, S. Haruyama, and M. Nakagawa, “High-accuracy positioning system using visible LED lights and image sensor,” in Proc. IEEE Radio and Wireless Symposium (Orlando, FL, USA, Jan. 2008), pp. 439-442.

S. Heissmeyer, L. Overmeyer, and A. I. Muller, “Indoor positioning of vehicles using an active optical infrastructure,” in Proc. Int. Conf. on Indoor Positioning and Indoor Navigation (Sydney, Australia, Nov. 2012), pp. 1-8.

M. S. Rahman and K.-D. Kim, “Indoor location estimation using visible light communication and image sensors,” International Journal of smart Home 7, 99-114 (2013).

M. S. Hossen, Y. Park, and K.-D. Kim, “Performance improvement of indoor positioning using light-emitting diodes and an image sensor for light-emitting diode communication,” Opt. Eng. 54, 1-11 (2015).