Optimization of Cutoff Shields in Projection Headlight Systems to Achieve High Intensity Gradient and Low Color Separation at the Cutoff Line Joo, Byung-Yun; Ko, Jae-Hyeon;
The shape and location of the cutoff shield in a projection-type headlight system were optimized by a ray-tracing technique. A shield based on a Petsval surface showed better cutoff characteristics than a flat or cylindrical shield, such as a sharp intensity gradient and less color separation at the cutoff line. Adjustment of the shield’s location between the reflector and the aspheric lens further improved its cutoff characteristics.
F. Luo and F. Hu, “A comprehensive survey of vision based vehicle intelligent front light system,” Int. J. on Smart Sensing and Intelligent Systems 7, 701-723 (2014).
P. V. Adhav and S. A. Shaikh, “Adaptive front lighting system using CCD,” IOSR Journal of Electronics and Communication Engineering 9, 20-25 (2014).
M. Sivak, M. J. Flannagan, B. Schoettle, and G. Adachi, "Chromatic aberrations near the cutoff of low-beam headlamps," Report No. UMTRI-2004-6 (2004).
ECE Regulation No. 112 Revision (2010).
O. Dross, A. Cvetkovic, J. Chaves, P. Benitez, and J. C. Minano, "LED headlight architecture that creates a high quality beam pattern independent of LED shortcomings," in Proc. SPIE (San Diego, USA, Jul. 2005), vol. 5942, p. 59420D.
F. Chen, K. Wang, Z. Qin, D. Wu, X. Luo, and S. Liu, “Design method of high-efficient LED headlamp lens,” Opt. Express 18, 20926-20938 (2010).
X. Zhu, J. Ni, and Q. Chen, "An optical design and simulation of LED low-beam headlamps," Journal of Physics: Conference Series 276, 012201 (2011).