A Novel Double-Loop Vector Control Strategy for PMSMs Based on Kinetic Energy Feedback

- Journal title : Journal of Power Electronics
- Volume 15, Issue 5, 2015, pp.1256-1263
- Publisher : The Korean Institute of Power Electronics
- DOI : 10.6113/JPE.2015.15.5.1256

Title & Authors

A Novel Double-Loop Vector Control Strategy for PMSMs Based on Kinetic Energy Feedback

Wang, Anbang; Wang, Qunjing; Jiang, Weidong;

Wang, Anbang; Wang, Qunjing; Jiang, Weidong;

Abstract

A novel vector control strategy for a permanent magnet synchronous motor (PMSM) based on the kinetic energy stored in the rotor is proposed in this paper. The novel strategy is composed of two closed loops, in which the current loop is the inner loop, and the kinetic energy serves as the outer loop. The theoretical basis and the design procedure of the two loops are given. The feasibility of the proposed control strategy is verified by experimental results. When compared with traditional vector control strategies, the proposed vector control strategy based on energy feedback has better dynamic performance. In addition, an effective estimation solution for the load variation is put forward.

Keywords

Kinetic energy feedback;Load estimation;PMSM;Vector control;

Language

English

Cited by

References

1.

T. Noguchi, H. Tomiki, and S. Kondo, “Direct power control of PWM converter without power-source voltage sensors,” IEEE Trans. Ind. Appl., Vol. 34, No. 6, pp. 473-479, May/Jun. 1998.

2.

J. B. Chu, Y. W. Hu, and W. X. Huang, “Basic theory of direct power control for PMSM,” Trans. China Electrotech. Soc., Vol. 24, No. 10, pp. 21 -26, Oct. 2009.

3.

P. Cortes, M. P. Kazmierkowski, R. M. Kennel, D. E. Quevedo, and J. Rodriguez, "Predictive control in power electronics and drives," IEEE Trans. Ind. Electron., Vol. 55, No. 12, pp. 4312-4324, Dec. 2008.

4.

Y. Luo, Y. Q. Chen, H.S. Ahnc, and Y. G. Pi, “Fractional order periodic adaptive learning compensation for cogging effect in PMSM position servo system,” American Control Conference, pp. 937-942, 2009.

5.

I. C. Baik, K.-H. Kim, and M. J. Youn, “Robust nonlinear speed control of PM synchronous motor using boundary layer integral sliding mode controltechnique,” IEEE Trans. Control Syst. Technol., Vol. 8, No. 1, pp.47-54, Jan. 2000.

6.

S. H. Li, H. X. Liu. and S. H. Ding, “A speed control for a PMSM using finite-time feedback control and disturbance compensation,” Tran. Inst. Measur. Contr., Vol. 32, No. 2, pp. 170-187, Feb.2010.

7.

H. X. Liu and S. H. Li, “Speed control for PMSM servo system using predictive functional control and extended state observer,” IEEE Trans. Ind. Electron., Vol. 59, No. 2, pp.1171-1183, Feb.2012.

8.

F. F. M. El-Sousy, “Hybrid H-infinity-based wavelet-neural-network tracking control for permanent-magnet synchronous motor servo drives,” IEEE Trans. Ind. Electron., Vol. 57, No. 9, pp.3157-3166, Sep. 2010.

9.

K. H. Kim and M. J. Youn, “A nonlinear speed control for a PM synchronous motor using a simple disturbance estimation technique,” IEEE Trans. Ind. Electron., Vol. 49, No. 3, pp. 524 -535, Mar. 2002.

10.

Y. S. Kung and M. H. Tsai, “FPGA-based speed control IC for PMSM drive with adaptive fuzzy control,” IEEE Trans. Power Electron., Vol. 22, No. 6, pp. 2476-2486, Jun. 2007.

11.

F. J. Lin and C. H. Lin, “A permanent magnet synchronous motor servo drives using self-constructing fuzzy neural network controller,” IEEE Trans. Energy Convers., Vol. 19, No. 1, pp. 66-72, Mar.2003.

12.

S. H. Li and Z. G. Liu, “Adaptive speed control for permanent magnet synchronous motor system with variations of load inertia,” IEEE Trans. Ind. Electron., Vol. 56, No. 8, pp.3050-3059, Aug. 2009.

13.

Y. A. R. I. Mohamed, "Design and implementation of a robust current control scheme for a PMSM vector drive with a simple adaptive disturbance observer," IEEE Trans. Ind. Electron., Vol. 54, No. 4, pp. 1981-1988, Apr. 2007.

14.

S. M. Yang and Y. J. Deng, “Observer-based inertia identification for autotuning servo motor drivers,” 40th IAS Annu. Meeting, pp.968-972, 2005.

15.

H. H. Choi, N. T. T. Vu, and J. W. Jung, "Digital implementation of an adaptive speed regulator for a PMSM," IEEE Trans. Power Electron., Vol. 26, No. 1, pp. 3-8, Jan. 2011.

16.

F. Hardan, J. A. M. Bleijs, R. Jones, and P. Bromley, “Bi-directional power control for flywheel energy storage system with vector-controlled induction machine drive,” in Proc. Power Electronics and Variable Speed Drives, pp.477-482, 1998.