A Sliding Mode Control Design based on the Reaching Law for Matrix Rectifiers

- Journal title : Journal of Power Electronics
- Volume 16, Issue 3, 2016, pp.1122-1130
- Publisher : The Korean Institute of Power Electronics
- DOI : 10.6113/JPE.2016.16.3.1122

Title & Authors

A Sliding Mode Control Design based on the Reaching Law for Matrix Rectifiers

Wang, Zhiping; Mao, Yunshou; Hu, Zhanhu; Xie, Yunxiang;

Wang, Zhiping; Mao, Yunshou; Hu, Zhanhu; Xie, Yunxiang;

Abstract

This paper presents a novel approach for achieving both a tight DC voltage regulation and a power factor control by applying the Reaching Law Sliding Mode Control (RL-SMC) and the conventional Sliding Mode Control (SMC). Applying these strategies on a matrix rectifier (MR) can achieve a unity grid side power factor when the DC load changes widely and it can provide a ripple-free output voltage that is easily affected by distortions of the three-phase ac voltage supply. Furthermore, by employing the reaching law on the SMC can solve the chatting problem of the sliding motion. Comparative Matlab simulations and experimental verifications for these strategies have been presented and discussed in this paper. The results show that by applying the SMC and RL-SMC on a MR can achieve a unity grid side power factor and a regulated ripple-free DC output.

Keywords

Input power factor;Matrix rectifier;Reaching law;Sliding mode control;

Language

English

Cited by

References

1.

J. W. Kolar, T. Friedli, J. Rodriguez, and P. W. Wheeler, “Review of three-phase PWM AC–AC converter topologies,” IEEE Trans. Ind. Electron., Vol. 58, No. 11, pp. 4988-5006, Nov. 2011.

2.

P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham, and A. Weinstein, “Matrix converter: a technology review,” IEEE Trans. Ind. Electron., Vol. 49, No. 2, pp. 276-288, Apr. 2002.

3.

D. G. Holmes and T. A. Lipo, “Implementation of a controlled rectifier using AC-AC matrix converter theory,” IEEE Trans. Power Electron., Vol. 7, No. 1, pp. 240-250, Jan. 1992.

4.

Z. Xu, G. X. Yin, and D. G. Xu, “A new bidirectional AC–DC converter using a matrix converter topology,” Transactions of China Electrotechnical Society, Vol. 26, No. 8, pp.64-70, Aug. 2011.

5.

M. Venturini and A. Alesina, "The generalized transformer: a new bidirectional sinusoidal waveform frequency converter with continuously adjustable input power factor," in IEEE Power Electronics Specialists Conference (PESC), pp. 242-252. 1980.

6.

G. Roy and G. E. April, "Cycloconverter operation under a new scalar control algorithm," in 20th Annual IEEE Power Electronics Specialists Conference (PESC), Vol. 1, pp. 368-375, Jun. 1989.

7.

D. Casadei, G. Serra, A. Tani, and L. Zarri, “Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state,” IEEE Trans. Ind. Electron., Vol. 49, No. 2, pp. 370-381, Apr. 2002.

8.

X. Y. Liu, B. Zhou, H. Q. Xian, and M. M. Shi, “Investigation on grid side power factor of two stage matrix converter,” Transactions of China Electrotechnical Society, Vol. 27, No.12, pp. 71-78, Dec. 2012.

9.

W. Cai, X. J. Yang, and Y. M. Gong, “Research on power characteristics of matrix rectifier,” Automation of Electric Power Systems, Vol. 30, No. 8, pp. 27-31, Aug. 2006.

10.

Z. P. Wang, Y. X. Xie, K. Yang, and M. Luo, “Feedforward fuzzy compensation control of matrix rectifier in abnormal conditions,” Electric Power Automation Equipment, Vol. 34, No. 5, pp. 98-104, May 2014.

11.

X. N. Lu, K. Sun, and G. Li, “Control method analysis of grid side power factor in two stage matrix converter,” Transactions of China Electrotechnical Society, Vol. 25, No. 10, pp. 108-114, Oct. 2010.

12.

J. D. Zhu, Z. Xu, B. H. Jiang, and C. H. Zhang, "Close-loop control of an AC-DC matrix converter for automotives," in IEEE Electrical Power and Energy Conference (EPEC), pp. 426-431, Oct. 2011.

13.

W. L. Deng, X. R. Yang, and J. L. Zhu, “Study of closed loop control based on double synchronous rotating frame for two-stage matrix converter under unbalanced load,” Proceedings of the CSEE, Vol. 26, No. 10, pp. 70-75, Oct. 2006.

14.

H. M. Nguyen, H.-H. Lee, and T.-W. Chun, “Input power factor compensation algorithms using a new direct-SVM method for matrix converter,” IEEE Trans. Ind. Electron., Vol. 58, No. 1 pp. 232-243, Jan. 2011.

15.

X. Liu, Q. F. Zhang, and D. L. Hou, “Sliding mode variable structure control of matrix rectifiers,” Transactions of. China Electrotechnical Society, Vol. 28 No. 4, pp. 149-164, Apr. 2013.

16.

M. Venturini and A. Alesina, "The generalized transformer: a new bidirectional sinusoidal waveform frequency converter with continuously adjustable input power factor," in IEEE Power Electronics Specialists Conference (PESC), pp. 242-252, 1980.

17.

A. Alesina and M. Venturini, "Intrinsic amplitude limits and optimum design of 9-switches direct PWM AC-AC converters," in IEEE Power Electronics Specialists Conference(PESC), Vol. 2, pp. 1284-1291, Apr. 1988.

18.

M. K. Kiran and A. Srinivasulu, “Matrix converter using svm method with input power factor compensation,” IOSR Journal of Electrical and Electronics Engineering, Vol. 2, No. 4, pp. 1-10, Oct. 2012.