Publisher : The Korean Institute of Electrical and Electronic Material Engineers
DOI : 10.4313/TEEM.2016.17.2.57
Title & Authors
Design and Implementation of Modified Current Source Based Hybrid DC - DC Converters for Electric Vehicle Applications Selvaganapathi, S.; Senthilkumar, A.;
In this study, we present the modern hybrid system based power generation for electric vehicle applications. We describe the hybrid structure of modified current source based DC - DC converters used to extract the maximum power from Photovoltaic (PV) and Fuel Cell system. Due to reduced dc-link capacitor requirement and higher reliability, the current source inverters (CSI) better compared to the voltage source based inverter. The novel control strategy includes Distributed Maximum Power Point Tracking (DMPPT) for photovoltaic (PV) and fuel cell power generation system. The proposed DC - DC converters have been analyzed in both buck and boost mode of operation under duty cycle 0.5>d, 0.5<d<1 and 0.5<d for capable electric vehicle applications. The proposed topology benefits include one common DC-AC inverter that interposes the generated power to supply the charge for the sharing of load in a system of hybrid supply with photovoltaic panels and fuel cell PEM. An improved control of Direct Torque and Flux Control (DTFC) based induction motor fed by current source converters for electric vehicle.In order to achieve better performance in terms of speed, power and miles per gallon for the expert, to accepting high regenerative braking current as well as persistent high dynamics driving performance is required. A simulation model for the hybrid power generation system based electric vehicle has been developed by using MATLAB/Simulink. The Direct Torque and Flux Control (DTFC) is planned using Xilinx ISE software tool in addition to a Modelsim 6.3 software tool that is used for simulation purposes. The FPGA based pulse generation is used to control the induction motor for electric vehicle applications. FPGA has been implemented, in order to verify the minimal error between the simulation results of MATLAB/Simulink and experimental results.
Photovoltaic array (PV);Proton exchange membrane fuel cell (PEMFC);DC - DC converters;Current source inverter (CSI);Distributed maximum power point tracking (DMPPT);Induction motor;Direct torque Control (DTC);Electric vehicle;Hybrid power generation;
N. Omar, P.V.D. Bossche, G. Mulder, M. Daowd, J. M. Timmermans, J. V. Mierlo, and S. Pauwals, IEEE on Vehicle Power and Propulsion Conference (VPPC), 6, 1 (2011). [DOI: http://dx.doi.org/10.1109/VPPC.2011.6043017]
E. Omar, J. V. Mierlo, and P. Lataire, Journal of Power Electronics, 11, 120 (2011). [DOI: http://dx.doi.org/10.6113/JPE.2011.11.2.120]
T. Sutikno, N. R. N. Idris, A. Z. Jidin, and M. Z. Daud, M.Z., IEEE on Applied Power Electronics Colloquium (IAPEC), 18, 122 (2011). [DOI: http://dx.doi.org/10.1109/IAPEC.2011.5779871]
Gdaim, S.; Mtibaa, A.; Mimouni, M.F., 5th International Conference onModeling, Simulation and Applied Optimization (ICMSAO), 28, 1 (2013).
O. Ellabban, J. V. Mierlo, and P. Lataire, International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), 11, 1 (2011).
S. S. Nag and S. Mishra, IEEE Transactions on Industrial Electronics, 61, 4680 (2014). [DOI: http://dx.doi.org/10.1109/TIE.2013.2289907]
S. Arezki, and M. Boudour, 16th International Power Electronics and Motion Control Conference and Exposition (PEMC), 21, 725 (2014). [DOI: http://dx.doi.org/10.1109/EPEPEMC.2014.6980583]
W. Bin, X. Jun, C. Binggang, AND L. Qiyu, and Y. Qingxia, Journal of Power Electronics, 15, 849 (2015). [DOI: http://dx.doi.org/10.6113/JPE.2015.15.3.849]
R. Dash, P. R. Behera, and S. M. Ali, International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT), 10, 388 (2014).
T. Mhamdi and L. Sbita, 5th International Renewable Energy Congress (IREC), 25, 1 (2014).
O. Hegazy, J. V. Mierlo, and Philippe Lataire. Journal of Power Electronics, 11, 408 (2011). [DOI: http://dx.doi.org/10.6113/JPE.2011.11.4.408]
G. Nielson, A. Emadi, IEEE on Vehicle Power and Propulsion Conference (VPPC), 6, 1 (2011). [DOI: http://dx.doi.org/10.1109/VPPC.2011.6043052]
J. R. Yoon, B. H. Moon, H. Y. Lee, D. Y. Jeong, and D. H. Rhie, Journal of Electrical Engineering & Technology, 8, 808 (2013). [DOI: http://dx.doi.org/10.5370/JEET.2013.8.4.808]
V. R. Chowdhury and B. Saritha, IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 16, 1 (2014). [DOI: http://dx.doi.org/10.1109/PEDES.2014.7041956]
Y. Haizhong, Y. Yang and A. Emadi, IEEE Transportation Electrification Conference and Expo (ITEC), 18, 1 (2012).
B. G. You, J. M. Ko, J. H. Kim, and B. K. Lee, Journal of Electrical Engineering & Technology, 10, 1075 (2015). [DOI: http://dx.doi.org/10.5370/JEET.2015.10.3.1075]
H. Yi, A. Ravey, D. Bouquain, G. Fei, A. Miraoui, and L. Weiguo, IEEE Transportation Electrification Conference and Expo (ITEC), 16, 1(2013). [DOI: http://dx.doi.org/10.1109/ITEC.2013.6574516]
P. B. Bobba and K. R. Rajagopal, IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 16, 1 (2012). [DOI: http://dx.doi.org/10.1109/PEDES.2012.6484365]