JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of stiffened element and edge stiffener in strength and behaviour of cold formed steel built-up beams
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effect of stiffened element and edge stiffener in strength and behaviour of cold formed steel built-up beams
Manikandan, P.; Sukumar, S.;
 
 Abstract
The aim of this study is to investigate the effect of stiffened element and edge stiffener in the behaviour and flexural strength of built-up cold-formed steel beams. An experimental and analytical analysis of CFS channel sections in four different geometries is conducted, including simple channel sections, a stiffened channel section with or without edge stiffeners. Nonlinear finite element models are developed using finite element analysis software package ANSYS. The FEA results are verified with the experimental results. Further, the finite element model is used for parametric studies by varying the depth, thickness, and the effect of stiffened element, edge stiffener and their interaction with compression flanges on stiffened built-up cold-formed steel beams with upright edge stiffeners. In addition, the flexural strength predicted by the finite element analysis is compared with the design flexural strength calculated by using the North American Iron and Steel Institute Specifications for cold-formed steel structures (AISI: S100-2007) and suitable suggestion is made.
 Keywords
built-up beams;cold formed steel;beams;edge stiffener;finite element analysis;
 Language
English
 Cited by
 References
1.
AISI: S100-2007 (2007), "Specification for the design of cold-formed steel structural members", American Iron and steel Institute.

2.
Anapayan, T., Mahendran, M. and Mahaarachchi, D. (2011), "Lateral distortional tests of a new hollow flange channel beam", Thin wall. Struct, 49(1), 13-25. crossref(new window)

3.
Desmond, T.P., Pekoz, T. and winter, G. (1981), "Edge stiffeners for thin-walled members", J. Struct. Eng., ASCE, 107(2), 329-353.

4.
Haidarali, M.R. and Nethercot, D.A. (2012), "Local and distortional buckling of cold-formed steel beams with both edge and intermediate stiffeners in their compression flanges", Thin Wall. Struct., 54, 106-112. crossref(new window)

5.
Haidarali, M.R. and Nethercot, D.A. (2012), "Local and distortional buckling of cold-formed steel beams with edge stiffened flanges", Thin Wall. Struct., 73, 31-42.

6.
Huang, Y. and Young, B. (2013), "Experimental and numerical investigation of cold-formed lean duplex stainless steel flexural members", Thin Wall. Struct., 73, 216-228. crossref(new window)

7.
Kankanamge, N.D. and Mahendran, M. (2012), "Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling'', Thin Wall. Struct., 51, 25-38. crossref(new window)

8.
Maduliat, S., Bambach, M.R. and Zhao, X.L. (2012a), "Inelastic behaviour and design of cold-formed channel sections in bending", Thin Wall. Struct., 51, 158-166. crossref(new window)

9.
Maduliat, S., Mendis, P. and Ngo, T.D. (2015), "Failure modes and buckling coefficient of partially stiffened cold-formed sections in bending", Thin Wall. Struct., 111, 21-30.

10.
Manikandan, P., Sukumar, S. and Balaji, T.U. (2014), "Effective shaping of cold-formed thin-walled built-up beams in pure bending", Arab J. Sci. Eng., 39(8), 6043-6054. crossref(new window)

11.
Manikandan, P. and Sukumar, S. (2015), "Behaviour of stiffened cold-formed steel built-up sections with complex edge stiffeners under bending", KSCE J. Civ. Eng., 19(7), 2108-2115. crossref(new window)

12.
Naderian, H.R., Ronagh, H.R. and Azhari, M. (2014), "Elastic distortional buckling of doubly symmetric steel I-section beams with slender webs", Thin Wall. Struct., 84, 289-301. crossref(new window)

13.
Pan, C.L. and Yu, W.W. (2002), "Bending strength of hybrid cold-formed steel beams", Thin Wall. Struct., 40(5), 399-414. crossref(new window)

14.
Sabbagh, A.P., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2011), "Ductile moment-resisting frames using cold-formed steel sections: An analytical investigation", Thin Wall. Struct., 67(4), 634-646.

15.
Wang, H. and Zhang, Y. (2009), "Experimental and numerical investigation of cold-formed steel c-section flexural members", Thin Wall. Struct., 65(5), 1225-1235.

16.
Young, B. and Ren, W. (2006), "Finite-element simulation and design of cold-formed steel channels subjected to web crippling", J. Struct. Eng., ASCE, 132(12), 1967-1974. crossref(new window)

17.
Yu, C. and Schafer, B.W. (2003), "Local buckling tests on cold-formed steel beams", J. Struct. Eng., ASCE, 129(12), 1596-1606. crossref(new window)

18.
Yu, C. and Schafer, B.W. (2006), "Distortional buckling tests on cold-formed steel beams", J. Struct. Eng., ASCE, 132(4), 515-528. crossref(new window)