Advanced SearchSearch Tips
Structural health monitoring of innovative civil engineering structures in Mainland China
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Structural health monitoring of innovative civil engineering structures in Mainland China
Li, Hong-Nan; Li, Dong-Sheng; Ren, Liang; Yi, Ting-Hua; Jia, Zi-Guang; LI, Kun-Peng;
This paper describes the backgrounds, motivations and recent history of structural health monitoring (SHM) developments to various types of engineering structures. Extensive applications of SHM technologies in bridges, high-rise buildings, sport avenues, offshore platforms, underground structures, dams, etc. in mainland China are summarily categorized and listed in tables. Sensors used in implementations, their deployment, damage identification strategies if applicable, preliminary monitoring achievements and experience are presented in the lists. Finally, existing problems and promising research efforts in civil SHM are discussed, highlighting challenges and future trends.
structural health monitoring;large-span civil infrastructure;high-rise buildings;damage identification;data normalization;
 Cited by
Damage Detection in the Cable Structures of a Bridge Using the Virtual Distortion Method, Journal of Bridge Engineering, 2017, 22, 8, 04017039  crossref(new windwow)
Investigation on Eddy Current Sensor in Tension Measurement at a Resonant Frequency, Applied Sciences, 2017, 7, 6, 538  crossref(new windwow)
Study on an innovative self-inductance tension eddy current sensor based on the inverse magnetostrictive effect, Sensor Review, 2017, 37, 1, 43  crossref(new windwow)
Influence of bias magnetic field for sleeve eddy current sensor (SECS) in tension measurement, Sensors and Actuators A: Physical, 2017, 263, 451  crossref(new windwow)
Deployment of a Smart Structural Health Monitoring System for Long-Span Arch Bridges: A Review and a Case Study, Sensors, 2017, 17, 9, 2151  crossref(new windwow)
A Probabilistic Damage Identification Method for Shear Structure Components Based on Cross-Entropy Optimizations, Entropy, 2017, 19, 12, 27  crossref(new windwow)
Aktan, A.E. (2009), "Characterizing highway bridges", Proceedings of the SPIE : Smart Structures and Materials, CA, USA, March.

Alamdari, M.M., Samali, B. and Li, J. (2015), "Damage localization based on symbolic time series analysis", Struct. Control Health Monit., 22(2), 374-393. crossref(new window)

Alampalli, S. (2000), "Effects of testing, analysis, damage and environment on modal parameters", Mech. Syst. Signal. Pr., 14(1), 63-74. crossref(new window)

Alvandia, A. and Cremona, C. (2006), "Assessment of vibration-based damage identification techniques", J. Sound. Vib., 292(1-2), 179-202. crossref(new window)

Bhalla, S., Yang, Y.W., Zhao, J. and Soh, C.K. (2005), "Structural health monitoring of underground facilities-Technological issues and challenges", Tunn. Undergr. Sp. Tech., 20(5), 487-500. crossref(new window)

Bolton, R., Stubbs, N., Park, S., Sikorsky, C. and Choi, S. (2001), "Documentation of changes in modal properties of a concrete box-girder bridge due to environmental and internal conditions", Comput-Aided. Civ. Inf., 16(1), 42-57. crossref(new window)

Brownjohn, J.M. (2007), "Structural health monitoring of civil infrastructure", Philos. T. R. Soc. A., 365(1851), 589-622. crossref(new window)

Cross, E., Manson, G., Worden, K. and Pierce, S. (2012), "Features for damage detection with insensitivity to environmental and operational variations, proceedings of the royal society a: mathematical", Phys. Eng. Sci., 468(2148), 4098-4122. crossref(new window)

Deraemaeker, A., Reynders, E., De Roeck, G. and Kullaa, J. (2008), "Vibration based structural health monitoring using output-only measurements under changing environment", Mech. Syst. Signal. Pr., 22(1), 34-56. crossref(new window)

Doebling, S.W., Farrar, C.R., Prime, M.B., et al. (1996), Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, Los Alamos National Laboratory Report, LA,NM.

Erturk, A. and Inman, D.J. (2011), Piezoelectric Energy Harvesting, Wiley.

Fan, W. and Qiao, P.Z. (2011), "Vibration-based Damage Identification Methods: A Review and Comparative Study ", Struct. Health. Monit., 10(1), 83-111. crossref(new window)

Farrar, C.R. and Worden, K. (2013), Structural Health Monitoring-A Machine Learning Perspective, John Wiley & Sons Ltd, Chichester, UK.

Figueiredo, E., Todd, M., Farrar, C. and Flynn, E. (2010), "Autoregressive modeling with state-space embedding vectors for damage detection under operational variability", Int. J. Eng. Sci., 48(10), 822-834. crossref(new window)

Hu, J., Li, H., Yang H.Z., Zhang Q.L.(2014), "Integrated design and application structural health monitoring software system of Shanghai Tower", J. Tongji Univ. (Natural Science), 42(3), 460-467.

Huang, F.L., He, X.H., Chen, Z.Q. and Zeng, C.H. (2004), "Structural safety monitoring for Nanjing Yangtze River Bridge", J. Cent. South. Univ. Technol., 11(3), 332-335. crossref(new window)

Jia, Z., Ren, L., Li, D. and Li, H. (2011), "Cable stretching construction monitoring based on FBG sensor", Proceedings-SPIE the International Society for Optical Engineering. San Diego, CA.

Kullaa, J. (2004), "Structural health monitoring under variable environmental or operational conditions", Proceedings of the 2nd European Workshop on Structural Health Monitoring, Munich, Germany.

Li, A.Q., Ding, Y.L., Deng, Y., Yao B., Yang, J. and Zhou, J.H. (2010), "Technology and application of structural health condition assessment for Sutong Bridge (2): damage alarming of main girder", J. Dis. Prev. Mitig. Engr., 30(3), 330-335.

Li, D.S., Li, H.N. and Fritzen, C.P. (2012), "Load dependent sensor placement method: theory and experimental validation", Mech. Syst. Signal. Pr., 31, 217-227. crossref(new window)

Li, D.S., Li, H.N., Ren, L. and Song, G. (2006), "Strain transferring analysis of fiber Bragg grating sensors", Opt. Eng., 45(2), 4402.

Li, H. N., Li, D. S. and Song, G. B. (2004), "Recent applications of fiber optic sensors to health monitoring in civil engineering", Eng. Struct., 26(11), 1647-1657. crossref(new window)

Li, H.N., Yi, T.H., Ren, L., Li, D.S. and Huo L.S.(2014), "Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1),1-45.

Li, H.N., Yi, T.H., Yi, X.D. and Wang, G.X. (2007), "Measurement and analysis of wind-induced response of tall building based on GPS technology", Adv. Struct. Eng., 10(1), 83-93. crossref(new window)

Li, N. (2000), "Brief talk of the action of dam security monitoring system on construction and operation of Three Gorges Dam", Exp. Tech. Manag., 17(4), 80-84.

Li, R., Mita, A. and Zhou, J. (2013), "Symbolization-based differential evolution strategy for identification of structural parameters", Struct. Control Health Monit., 20(10), 1255-1270. crossref(new window)

Liu, C. and DeWolf, J. (2007), "Effect of temperature on modal variability of a curved concrete bridge under ambient loads", J. Struct. Eng.-ASCE., 133(12), 1742-1751. crossref(new window)

Liu, S.C., Zhang, D.L., Huang, J. and Zhang, C.P. (2011), "Research and design on structural health monitoring System for Large-scale Shield Tunnel", Chinese Journal of Underground Space and Engineering, 7(4), 741-748.

Lu, W. (2010), The structural health monitoring system of large span space structure based on field bus, Ph.D. Dissertation, Harbin Institute of Technology, Harbin.

Lynch, J.P. (2007), "An overview of wireless structural health Monitoring for Civil Structures", Philos. T. Roy. Soc. A., 365(1851), 345-372. crossref(new window)

Maeck, J., Peeters, B. and De Roeck, G. (2001),"Damage identification on the Z24 bridge using vibration monitoring analysis", Smart Mater. Struct., 10(3), 512-517. crossref(new window)

Manson, G. (2002), "Identifying damage sensitive, environment insensitive features for damage detection", Proceedings of the 3rd International Conference on Identification in Engineering Systems, University of Wales Swansea, UK.

Messina, A., Williams, E.J. and Contursi, T. (1998), "Structural damage detection by a sensitivity and statistical-based method", J. Sound. Vib., 216(5), 791-808. crossref(new window)

Min, F.L., Zhu, W., Lin, C. and Guo, X.J. (2015), "Opening the excavation chamber of the large-diameter size slurry shield: A case study in Nanjing Yangtze River Tunnel in China", Tunn. Undergr. Sp. Tech., 46(2), 18-27. crossref(new window)

Moaveni, B., He, X.F., Conte, J.P., Fraser, M.S. and Elgamal, A. (2009), "Uncertainty Analysis of Voigt Bridge Modal Parameters Due to Changing Environmental Conditions", Proceedings of the IMAC-XXVII, Florida, USA, February.

Mohammadtaghi, R., Mahdi, E. and Maria, I.T. (2015), "Wave dispersion in high-rise buildings due to soil-structure interaction", Earthq. Eng. Struct. D., 44(2), 317-323. crossref(new window)

Nayeri, R.D., Masri, S.F., Ghanem, R.G. and Nigbor, R.L. (2008), "A novel approach for the structural identification and monitoring of a full-scale 17-story building based on ambient vibration measurements", Smart. Mater. Struct., 17(2), 1-19.

Ni, Y.Q., Hua, X.G., Fan, K.Q. and Ko, J.M. (2005), "Correlating modal properties with temperature using long-term monitoring data and support vector machine technique", Eng. Struct., 27(12), 1762-1773. crossref(new window)

Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct. Control Health., 16(1), 73-98. crossref(new window)

Ou, J.P. (2003), "Some recent advances of intelligent health monitoring systems for civil infrastructures in mainland China", Proceeding of the 1st International Conference on Structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan.

Ou, J.P. and Li, H. (2010), "Structural Health Monitoring in mainland China: Review and Future Trends", Struct. Health. Monit., 9(3), 219-231. crossref(new window)

Ou, J.P., Xiao, Y.Q., Huang, H.J., Hai, Z.D., Zhang, T. and Li, W.X. (2001), "Real time safety monitoring system for offshore platform structures", Ocean Eng, 19(2), 1-6.

Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound. Vib., 145(2), 321-332. crossref(new window)

Peeters, B., Maeck, J. and Roeck, G.D. (2001), "Vibration-based damage detection in civil engineering: excitation sources and temperature effects", Smart. Mater. Struct., 10(3), 518-527. crossref(new window)

Roeck, G.D. (2003), "The state-of-the-art of damage detection by vibration monitoring: the SIMCES experience", J. Struct. Control., 10(2), 127-134. crossref(new window)

Salawu, O.S. and Williams, C. (1995), "A review of full-scale dynamic testing of bridge structures", Eng. Struct., 17(2), 113-121. crossref(new window)

Shi, B., Xu, X. J., Wang, D., Wang, T., Zhang, D., Ding, Y., Xu, H.Z. and Cui, H.L. (2005), "Study on BOTDR-based distributed optical fiber strain measurement for tunnel health diagnosis", Chinese J. Rock Mech. Eng., 24(15), 2622-2628.

Sohn, H. (2007), "Effects of environmental and operational variability on structural health monitoring", Philos. T. Roy. Soc. A., 365(1851), 539-560. crossref(new window)

Sohn, H., Dzwonczyk, M., Straser, E., Kiremidjian, A., Law, K. and Meng, T. (1999), "An experimental study of temperature effect on modal parameters of the Alamos Canyon Bridge", Earthq. Eng. Struct. D., 28(8), 879-897. crossref(new window)

Sohn, H., Farrar, C.R., Hemez, and F.M., et al. (2004), A review of structural health monitoring literature: 1996-2001, Los Alamos National Laboratory Report, LA, NM.

Su, J.Z., Xia, Y., Chen, L., Zhao, X., Zhang, Q.L., Xu, Y.L., Ding, J.M., Xiong, H.B., Ma, R.J., Lv, X.L. and Chen, A. R. (2013), "Long-term structural performance monitoring system for the Shanghai Tower", J. Civil. Struct. Health. Monit., 3(1), 49-61. crossref(new window)

Vanlanduit, S., Parloo, E., Cauberghe, B., Guillaume, P. and Verboven, P. (2005), "A robust singular value decomposition for damage detection under changing operating conditions and structural uncertainties", J. Sound. Vib., 284(3-5), 1033-1050. crossref(new window)

Visser, W. (2004), "Ship collision and capacity of brace members of fixed steel offshore platforms", HSE books, research report 220, 1-10.

Wang, Y.L., Yue, Q.J., Guo, F.W., Bi, X.J., Shi, Z.M., Qu, Y. (2012), "Performance evaluation of a new ice-resistant jacket platform based on field monitoring", Cold. Reg. Sci. Technol., 71, 44-53. crossref(new window)

Worden, K., Farrer, C. R., Manson, G. and Park, G. (2007), "The fundamental axioms of structural health monitoring", P. Roy. Soc. A-Math. Phy., 463(2082), 1639-1664. crossref(new window)

Xie, X.Y. and Feng, L. (2012), "Real-time health monitoring system for power tunnel", Proceeding of the Geo-Institute's 2012 Annual Congress, Oakland, CA.

Yan, A.M., Kerschen, G., Boe, P.D. and Golinval, J.C. (2005), "Structural damaged diagnosis under varying environmental conditions-part I: a linear analysis", Mech. Syst. Signal. Pr., 19(4), 847-864. crossref(new window)

Yan, J.G. and Li, S.P. (2002), "Design optimization of Three Gorges Dam deformation monitoring ", Yangtze River, 33(6), 36-38.

Yi, T.H., Li, H.N. and Gu, M. (2011), "Optimal sensor placement for structural health monitoring based on multiple optimization strategies", Struct. Des. Tall. Spec., 20(7), 881-900. crossref(new window)

Yi, T.H. and Li, H.N. (2012a), "Methodology developments in sensor placement for health monitoring of civil infrastructures", Int. J. Distrib. Sens. N., Article ID 612726, 1-11.

Zhan, C., Li, D.S. and Li, H.N. (2014), "A local damage detection approach based on restoring force method", J. Sound Vib., 333(20), 4942-4959. crossref(new window)

Zhang, J.P., Li, L. and Lu, Z.C. (2008), "Review and prospect of dam safety monitoring", J. China Inst. Water Resour. Hydropower Res., 6(4), 316-322.

Zhao, Z.R. and Xu, R. (2010), "Advance and prospect of monitoring technology for dam safety", Hydropower Automation and dam monitoring, 34(5), 52-57.