Advanced SearchSearch Tips
A review of recent research advances on structural health monitoring in Western Australia
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A review of recent research advances on structural health monitoring in Western Australia
Li, Jun; Hao, Hong;
Structural Health Monitoring (SHM) has been attracting numerous research efforts around the world because it targets at monitoring structural conditions and performance to prevent catastrophic failure, and to provide quantitative data for engineers and infrastructure owners to design a reliable and economical asset management strategy. In the past decade, with supports from Australian Research Council (ARC), Cooperative Research Center for Infrastructure and Engineering Asset Management (CIEAM), CSIRO and industry partners, intensive research works have been conducted in the School of Civil, Environmental and Mining Engineering, University of Western Australia and Centre for Infrastructural Monitoring and Protection, Curtin University on various techniques of SHM. The researches include the development of hardware, software and various algorithms, such as various signal processing techniques for operational modal analysis, modal analysis toolbox, non-model based methods for assessing the shear connection in composite bridges and identifying the free spanning and supports conditions of pipelines, vibration based structural damage identification and model updating approaches considering uncertainty and noise effects, structural identification under moving loads, guided wave propagation technique for detecting debonding damage, and relative displacement sensors for SHM in composite and steel truss bridges. This paper aims at summarizing and reviewing the recent research advances on SHM of civil infrastructure in Western Australia.
research advances;structural health monitoring;review;Western Australia;
 Cited by
Micro-seismic monitoring in mines based on cross wavelet transform,;;;;

Earthquakes and Structures, 2016. vol.11. 6, pp.1143-1164 crossref(new window)
Vibration-based structural health monitoring of the aircraft large component, IOP Conference Series: Materials Science and Engineering, 2017, 251, 012093  crossref(new windwow)
Improving substructure identification accuracy of shear structures using virtual control system, Smart Materials and Structures, 2018, 27, 2, 025013  crossref(new windwow)
A Whole-Range S–N Curve for Fatigue Assessment of Steel Orthotropic Bridge Decks, International Journal of Structural Stability and Dynamics, 2017, 1840010  crossref(new windwow)
Aktan A.E., Catbas F.N., Grimmelsman K.A. and Tsikos, C.J. (2000), "Issues in infrastructure health monitoring for management", J. Eng. Mech.-ASCE, 126(7), 711-724. crossref(new window)

Alamdari, M.M., Samali, B. and Li, J. (2015), "Damage localization based on symbolic time series analysis", Struct. Control Health Monit., 22(2), 374-393. crossref(new window)

Amirebrahimi, S., Rajabifard, A., Mendis, P. and Ngo, T. (2015), "A framework for a microscale flood damage assessment and visualization for a building using BIM-GIS integration", Int. J. Digital Earth, DOI:10.1080/17538947.2015.1034201. crossref(new window)

Ay, A.M. and Wang, Y. (2014), "Structural damage identification based on self-fitting ARMAX model and multi-sensor data fusion", Struct. Health Monit., 13(4), 445-460. crossref(new window)

Bakhary, N., Hao, H. and Deeks, A.J. (2007), "Damage detection using artificial neural network with consideration of uncertainties", Eng. Struct., 29(11), 2806-2815. crossref(new window)

Bakhary, N., Hao, H. and Deeks, A. (2010a), "Structure damage detection using neural network with multi-stage substructuring", Adv. Struct. Eng., 13(1), 95-110. crossref(new window)

Bakhary, N., Hao, H. and Deeks, A. (2010b), "Substructuring technique for damage detection using statistical multi-stage artificial neural network", Adv. Struct. Eng., 13(4), 619-640. crossref(new window)

Ban, H., Uy, B., Pathirana, S.W., Henderson, I., Mirza, O. and Zhu, X. (2015), "Time-dependent behaviour of composite beams with blind bolts under sustained loads", J. Constr. Steel Res., 112, 196-207. crossref(new window)

Bao, C., Hao, H., Li, Z.X. and Zhu, X. (2009), "Time-varying system identification using a newly improved HHT algorithm", Computers & Structures, 87(23), 1611-1623. crossref(new window)

Bao, C., Hao, H. and Li, Z.X. (2013a), "A study of variability and applicability of various signal processing techniques in structural system identification", Australian J. Struct. Eng., 14(1), 97-114.

Bao, C., Hao, H. and Li, Z.X. (2013b), "Multi-stage identification scheme for detecting damage in structures under ambient excitations", Smart Mater. Struct., 22(4), 045006. crossref(new window)

Bao, C., Hao, H. and Li, Z.X. (2013c), "Integrated ARMA model method for damage detection of subsea pipeline system", Eng. Struct., 48, 176-192. crossref(new window)

Bao, C., Hao, H. and Li, Z.X. (2013d), "Vibration-based structural health monitoring of offshore pipelines: numerical and experimental study", Struct. Control Health Monit., 20(5), 769-788. crossref(new window)

Bastidas-Arteaga, E., Schoefs, F., Stewart, M.G. and Wang, X. (2013), "Influence of global warming on durability of corroding RC structures: A probabilistic approach", Eng. Struct., 51, 259-266. crossref(new window)

Bastidas-Arteaga, E. and Stewart, M.G. (2015), "Damage risks and economic assessment of climate adaptation strategies for design of new concrete structures subject to chloride-induced corrosion", Struct. Saf., 52, 40-53. crossref(new window)

Brownjohn, J.M.W. (2007). "Structural health monitoring of civil infrastructure", Philos. T. R. Soc. A, 365(1851), 589-622. crossref(new window)

Brownjohn, J.M.W., Dumanoglu, A.A. and Severn, R.T. (1992), "Ambient vibration survey of the fatih sultan mehmet (second Bosporus) suspension bridge", Earthq. Eng. Struct. D., 21(10), 907-924. crossref(new window)

Caprani, C.C., OBrien, E.J. and McLachlan, G.J. (2008), "Characteristic traffic load effects from a mixture of loading events on short to medium span bridges", Struct. Saf., 30(5), 394-404. crossref(new window)

Carden, E.P. and Fanning, P. (2004), "Vibration based condition monitoring: a review", Struct. Health Monit., 3(4), 355-377. crossref(new window)

Chan T. and Thambiratnam D.P. (2011), Structural Health Monitoring in Australia, New York: Nova Science Publisher.

Dackermann, U., Skinner, B. and Li, J. (2014), "Guided wave-based condition assessment of in situ timber utility poles using machine learning algorithms", Struct. Health Monit., 13(4), 374-388. crossref(new window)

De Roeck, G., Peeters, B. and Ren, W.X. (2000), "Benchmark study on system identification through ambient vibration measurements", Proceedings of the IMAC-XVIII: The 18th International Modal Analysis Conference, San Antonio, TX.

Ding, L., Hao, H. and Zhu, X. (2009), "Evaluation of dynamic vehicle axle loads on bridges with different surface conditions", J. Sound Vib., 323(3), 826-848. crossref(new window)

Ding, L., Hao, H., Xia, Y. and Deeks, A. (2012), "Evaluation of bridge load carrying capacity using updated finite element model and nonlinear analysis", Adv. Struct. Eng., 15(10), 1739-1750. crossref(new window)

Doebling, S.W., Farrar, C.R. and Cornwell, P.J. (1997), "DIAMOND: a graphical interface toolbox for comparative modal analysis and damage identification", Proceedings of the 6th International Conference on Recent Advances in Structural Dynamics, Southampton.

Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. crossref(new window)

Duan, Z., Yan, G., Ou, J. and Spencer, B.F. (2007), "Damage detection in ambient vibration using proportional flexibility matrix with incomplete measured DOFs", Struct. Control Health Monit., 14(2), 186-196. crossref(new window)

Fan, W. and Qiao, P. (2011), "Vibration-based damage identification methods: a review and comparative study", Struct. Health Monit., 10(1), 83-111. crossref(new window)

Farrar C.R. and Worden K. (2007), "An introduction to structural health monitoring", Philos. T. R. Soc. A, 365(1851), 303-315. crossref(new window)

Farrar, C.R. and Lieven, N.A. (2007), "Damage prognosis: the future of structural health monitoring", Philos. T. R. Soc. A, 365(1851), 623-632. crossref(new window)

Frangopol, D.M., Strauss, A. and Kim, S. (2008), "Use of monitoring extreme data for the performance prediction of structures: general approach", Eng. Struct., 30(12), 3644-3653. crossref(new window)

Fujino, Y. (2002), "Vibration, control and monitoring of long-span bridges-recent research, developments and practice in Japan", J. Constr. Steel Res., 58(1), 71-91. crossref(new window)

Hao, H. and Xia, Y. (2002), "Vibration-based damage detection of structures by genetic algorithm", J. Comput. Civil Eng.-ASCE, 16(3), 222-229. crossref(new window)

Henderson, I.E.J., Zhu, X.Q., Uy, B. and Mirza, O. (2015), "Dynamic behaviour of steel-concrete composite beams with different types of shear connectors. Part I: Experimental study", Eng. Struct., 103, 298-307. crossref(new window)

Huynh, C.P., Mustapha, S., Runcie, P. and Porikli, F. (2015), "Multi-class support vector machines for paint condition assessment on the Sydney Harbour Bridge using hyperspectral imaging", Struct. Monit. Maint., 2(3), 181-197.

Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. crossref(new window)

Lee, J.J. and Yun, C.B. (2006). "Damage diagnosis of steel girder bridges using ambient vibration data", Eng. Struct., 28(6), 912-925. crossref(new window)

Lee, J., Guan, H., Loo, Y.C. and Blumenstein, M. (2012), "Refinement of backward prediction method for reliable artificial intelligence-based bridge deterioration modelling", Adv. Struct. Eng., 15(5), 825-836. crossref(new window)

Lee, J., Guan, H., Loo, Y.C. and Blumenstein, M. (2014), "Development of a long-term bridge element performance model using Elman neural networks", J. Infrastruct. Syst.-ASCE, 20(3), 04014013. crossref(new window)

Li, H.N, Yi, T.H., Ren, L., Li, D.S. and Huo, L.S. (2014a), "Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1), 1-45.

Li, J., Law, S.S. and Hao, H. (2013), "Improved damage identification in bridge structures subject to moving loads: numerical and experimental studies", Int. J. Mech. Sci., 74, 99-111. crossref(new window)

Li, J. and Hao, H. (2014), "Substructure damage identification based on wavelet-domain response reconstruction", Struct. Health Monit., 13(4), 389-405. crossref(new window)

Li, J., Hao, H., Xia, Y. and Zhu, H.P. (2014b), "Damage detection of shear connectors in bridge structures with transmissibility in frequency domain", Int. J. Struct. Stability Dynam., 14(2), 1350061. crossref(new window)

Li, J., Hao, H. and Zhu, H.P. (2014c), "Dynamic assessment of shear connectors in composite bridges with ambient vibration measurements", Adv. Struct. Eng., 17(5), 617-638. crossref(new window)

Li, J., Hao, H., Xia, Y. and Zhu, H.P. (2015a), "Damage assessment of shear connectors with vibration measurements and power spectral density transmissibility", Struct. Eng. Mech., 54(2), 257-289. crossref(new window)

Li, J., Hao, H. and Lo, J.V. (2015b), "Structural damage identification with power spectral density transmissibility: Numerical and experimental studies", Smart Struct. Syst., 15(1), 15-40. crossref(new window)

Li, J., Hao, H. and Fan, X. (2015c), "Structural damage identification with extracted impulse response functions and optimal sensor locations", Electronic J. Struct. Eng., 14(1), 123-132.

Li, J., Hao, H. and Chen, Z. (2015d), "Damage identification and optimal sensor placement for structures under unknown traffic-induced vibrations", J. Aerospace Eng.-ASCE, B4015001.

Li, J., Hao, H., Fan, K. and Brownjohn, J. (2015e), "Development and application of a relative displacement sensor for structural health monitoring of composite bridges", Struct. Control Health Monit., 22(4), 726-742. crossref(new window)

Li, J. and Hao, H. (2015), "Damage detection of shear connectors under moving loads with relative displacement measurements", Mech. Syst. Signal Pr., 60, 124-150.

Li, J. and Hao, H. (online), "Health monitoring of joint conditions in steel truss bridges with relative displacement sensors", Measurement: J. Int. Measurement Confederation. doi:10.1016/j.measurement.2015.12.009. crossref(new window)

Lumentut, M. and Howard, I.M. (2015), "Parametric design-based modal damped vibrational piezoelectric energy harvesters with arbitrary proof mass offset: numerical and analytical validations", Mech. Syst. Signal Pr., 68-69, 562-586.

Lynch, J.P. (2007), "An overview of wireless structural health monitoring for civil structures", Philos. T. R. Soc. A, 365(1851), 345-372. crossref(new window)

Mahini S.S. Eslami, A. and Ronagh, H.R. (2012), "Lateral performance and load carrying capacity of an unreinforced, CFRP-retrofitted historical masonry vault-a case study", Constr. Build. Mater., 28(1), 146-156. crossref(new window)

Mahmood, S.M., Haritos, N., Gad, E. and Zhang, L. (2014), "A multi-reference-based mode selection approach for the implementation of NExT-ERA in modal-based damage detection", Struct. Control Health Monit., 21(8), 1137-1153. crossref(new window)

Mufti A.A. (2002), "Structural health monitoring of innovative Canadian civil engineering structures", Struct. Health Monit., 1(1), 89-103. crossref(new window)

Mustapha, S., Lu, Y., Li, J. and Ye, L. (2014), "Damage detection in rebar-reinforced concrete beams based on time reversal of guided waves", Struct. Health Monit., 13(4), 347-358. crossref(new window)

Ng, C.T. (2011), Probabilistic Methods for Structural Safety Evaluation, Damage Detection and Reliability Analysis of Structures, VDM Verlag Dr. Muller GmbH & Co. KG.

Ng, C.T. (2014), "On the selection of advanced signal processing techniques for guided wave damage identification using a statistical approach", Eng. Struct., 64, 50-60.

Nguyen, T., Chan, T., Thambiratnam, D.P. and King, L. (2015), "Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring", Mech. Syst. Signal Pr., 64-65, 313-324. crossref(new window)

Nie, Z., Hao, H. and Ma, H. (2012), "Using vibration phase space topology changes for structural damage detection", Struct. Health Monit., 11(5), 538-557. crossref(new window)

Nie, Z., Hao, H. and Ma, H. (2013), "Structural damage detection based on the reconstructed phase space for reinforced concrete slab: Experimental study", J. Sound Vib., 332(4), 1061-1078. crossref(new window)

Ou, J. and Li, H. (2010), "Structural health monitoring in mainland China: review and future trends", Struct. Health Monit., 9(3), 219-231. crossref(new window)

Peng, X.L. and Hao, H. (2012), "A numerical study of damage detection of underwater pipeline using vibration-based method", Int. J. Struct. Stability Dynam., 12(3), 1250021. crossref(new window)

Peng, X.L., Hao, H. and Li, Z.X. (2012), "Application of wavelet packet transform in subsea pipeline bedding condition assessment", Eng. Struct., 39, 50-65. crossref(new window)

Peng, X.L., Hao, H., Li, Z.X. and Fan, K.Q. (2013), "Experimental study on subsea pipeline bedding condition assessment using wavelet packet transform", Eng. Struct., 48, 81-97. crossref(new window)

Pines D.J. and Aktan A.E. (2002), "Status of structural health monitoring of long-span bridges in the United States", Prog. Struct. Eng. Mater., 4(4), 372-380. crossref(new window)

Ren, W.X., Sun, Z.S., Xia, Y., Hao, H. and Deeks, A.J. (2008), "Damage identification of shear connectors with wavelet packet energy: laboratory test study", J. Struct. Eng.-ASCE, 134(5), 832-841. crossref(new window)

Samali, B., Li, J., Choi, F.C. and Crews, K. (2010), "Application of the damage index method for plate-like structures to timber bridges", Struct. Control Health Monit., 17(8), 849-871. crossref(new window)

Sharma, S. and Mukherjee, A. (2015), "Ultrasonic guided waves for monitoring corrosion in submerged plates", Struct. Control Health Monit., 22(1), 19-35. crossref(new window)

Teughels, A. and De Roeck, G. (2005), "Damage detection and parameter identification by finite element model updating", Arch. Comput. Method. E., 12(2), 123-164. crossref(new window)

Wahalathantri, B.L., Thambiratnam, D.P., Chan, T. and Fawzia, S. (2015), "Vibration based baseline updating method to localize crack formation and propagation in reinforced concrete members", J. Sound Vib., 344, 258-276. crossref(new window)

Wang, Y., Zhu, X., Hao, H. and Ou, J. (2009), "Guided wave propagation and spectral element method for debonding damage assessment in RC structures", J. Sound Vib., 324(3), 751-772. crossref(new window)

Wang, Y., Zhu, X., Hao, H. and Ou, J. (2011), "Spectral element model updating for damage identification using clonal selection algorithm", Adv. Struct. Eng., 14(5), 837-856. crossref(new window)

Wang, Y. and Hao, H. (2014), "Damage identification of steel beams using local and global methods", Adv. Struct. Eng., 15(5), 807-824.

Wang, Y., Hao, H., Zhu, X. and Ou, J. (2012), "Spectral element modelling of wave propagation with boundary and structural discontinuity reflections", Adv. Struct. Eng., 15(5), 855-870. crossref(new window)

Wang, Y., Khoo, S., Li, A.J. and Hao, H. (2013), "FEM calibrated ARMAX model updating method for time domain damage identification", Adv. Struct. Eng., 16(1), 51-60. crossref(new window)

Wang, Y. and Hao, H. (2013), "Damage identification of slab-girder structures: experimental studies", J. Civil Struct. Health Monit., 3(2), 93-103. crossref(new window)

Wang, Y. and Hao, H. (2013), "Damage identification scheme based on compressive sensing", J. Comput. Civil Eng., 29(2), 04014037.

Wong, K.Y. (2004), "Instrumentation and health monitoring of cable-supported bridges", Struct. Control Health Monit., 11(2), 91-124. crossref(new window)

Xia, Y., Hao, H., Brownjohn, J.M.W. and Xia, P.Q. (2002), "Damage identification of structures with uncertain frequency and mode shape data", Earthq. Eng. Struct. D., 31(5), 1053-1066. crossref(new window)

Xia, Y. and Hao, H. (2003), "Statistical damage identification of structures with frequency changes", J. Sound Vib., 263(4), 853-870. crossref(new window)

Xia, Y., Hao, H., Zanardo, G. and Deeks, A. (2006), "Long term vibration monitoring of an RC slab: temperature and humidity effect", Eng. Struct., 28(3), 441-452. crossref(new window)

Xia, Y., Hao, H. and Deeks, A.J. (2007), "Dynamic assessment of shear connectors in slab-girder bridges", Eng. Struct., 29(7), 1475-1486. crossref(new window)

Xia, Y., Hao, H., Deeks, A.J. and Zhu, X. (2008), "Condition assessment of shear connectors in slab-girder bridges via vibration measurements", J. Bridge Eng., 13(1), 43-54. crossref(new window)

Xiong, C., Lu, X., Hori, M., Guan, H. and Xu, Z. (2015), "Building seismic response and visualization using 3D urban polygonal modeling", Automat. Constr., 55, 25-34. crossref(new window)

Yan, Y.J., Cheng, L., Wu, Z.Y. and Yam, L.H. (2007), "Development in vibration-based structural damage detection technique", Mech. Syst. Signal Pr., 21(5), 2198-2211. crossref(new window)

Zanardo, G., Hao, H., Xia, Y. and Deeks, A. (2006), "Stiffness assessment through modal analysis of an RC slab bridge before and after strengthening", J. Bridge Eng.-ASCE,11(5), 590-601. crossref(new window)

Zhu, X.Q., Hao, H. and Peng, X.L. (2008), "Dynamic assessment of underwater pipeline systems using statistical model updating", Int. J. Struct. Stability Dynam., 8(2), 271-297. crossref(new window)

Zhu, X., Hao, H., Uy, B., Xia, Y. and Mirza, O. (2012), "Dynamic assessment of shear connection conditions in slab-girder bridges by Kullback-Leibler distance", Adv. Struct. Eng., 15(5), 771-780. crossref(new window)

Zhu, X.Q., Hao, H. and Fan, K.Q. (2013), "Detection of delamination between steel bars and concrete using embedded piezoelectric actuators/sensors", J. Civil Struct. Health Monit., 3(2), 105-115. crossref(new window)

Zhu, X.Q. and Law, S.S. (2015), "Structural Health Monitoring Based on Vehicle-Bridge Interaction: Accomplishments and Challenges", Adv. Struct. Eng., 18(12), 1999-2016. crossref(new window)