JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Spectroscopic and Mechanical Properties of Nano Silica Rubber Composite Material
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of the Chosun Natural Science
  • Volume 9, Issue 1,  2016, pp.62-66
  • Publisher : The Research Institute of Chosun Natural Science
  • DOI : 10.13160/ricns.2016.9.1.62
 Title & Authors
Spectroscopic and Mechanical Properties of Nano Silica Rubber Composite Material
Lee, Jung Kyu; Park, Juyun; Kang, Yong-Cheol; Koh, Sung Wi;
  PDF(new window)
 Abstract
To manipulate the mechanical properties of acrylonitrile butadiene rubber (NBR), addition of nano-sized silica on rubber was performed and nano-silica NBR composite (NSR) materials were fabricated by press molding. The effect of volume fraction of silica in the NSR on the spectroscopic and mechanical properties has been studied.
 Keywords
NBR;Nano-silica;Volume Fraction;NSR;
 Language
English
 Cited by
 References
1.
J. K. Lancaster, "Polymer-based bearing materials: The role of fillers and fibre reinforcement", Tribology, Vol. 5, pp. 249-255, 1972. crossref(new window)

2.
L. C. Vazquez, E. Hagel, B. J. Willenberg, W. Dai, F. Casanova, C. D. Batich, and M. Sarntinoranont, "Polymer-coated cannulas for the reduction of backflow during intraparenchymal infusions", J. Mater. Sci-Mater. M., Vol. 23, pp. 2037-2046, 2012. crossref(new window)

3.
J. R. Tarpani, O. Maluf, and M. C. A. Gatti, "Charpy impact toughness of conventional and advanced composite laminates for aircraft construction", Materials Research, Vol. 12, pp. 395-403, 2009. crossref(new window)

4.
H. W. Andresen and A. T. Echtermeyer, "Critical energy release rate for a CSM reinforced carbon fibre composite/steel bonding", Compos. Part A-Appl. S., Vol. 37, pp. 742-751, 2006. crossref(new window)

5.
J. C. Slattery, K.-B. Fu, and E.-S. Oh, "The mechanics and thermodynamics of edge fracture: the critical energy release rate, the compatibility constraint, and the bond potential", Philos. Mag., Vol. 92, pp. 1788-1802, 2012. crossref(new window)

6.
P. Yu, H. He, C. Jiang, Y. Jia, D. Wang, X. Yao, D. Jia, and Y. Luo, "Enhanced oil resistance and mechanical properties of nitrile butadiene rubber/lignin composites modified by epoxy resin", J. Appl. Polym. Sci., Vol. 133, pp. 42922, 2016.

7.
H. Kim, J. Kobashi, Y. Maeda, H. Yoshida, and M. Ozaki, "Pitch-length independent threshold voltage of polymer/cholesteric liquid crystal nano-composites", Crystals, Vol. 5, pp. 302-311, 2015. crossref(new window)

8.
M. Razavizadeh and M. Jamshidi, "Adhesion of nitrile rubber (NBR) to polyethylene terephthalate (PET) fabric. Part 1: PET surface modification by methylenediphenyl di-isocyanate (MDI)", Appl. Surf. Sci., Vol. 360, pp. 429-435, 2016. crossref(new window)

9.
E. Kontou and G. Anthoulis, "The effect of silica nanoparticles on the thermomechanical properties of polystyrene", J. Appl. Polym. Sci., Vol. 105, pp. 1723-1731, 2007. crossref(new window)

10.
S. H. Lee and Y. Choi, "Effect of nano-sized oxide particles on thermal and electrical properties of epoxy silica composites", Phys. Met. Metallogr+., Vol. 115, pp. 1295-1299, 2014. crossref(new window)

11.
R. L. Zhang, T. X. Li, Y. D. Huang, and L. Liu, "Effect of the clay on the thermal stability and mechanical properties of Nitrile-Butadiene Rubber (NBR)/clay nanocomposites", J. Optoelectron. Adv. M., Vol. 16, pp. 629-633, 2014.

12.
H. S. Vaziri, M. Abadyan, M. Nouri, I. A. Omaraei, Z. Sadredini, and M. Ebrahimnia, "Investigation of the fracture mechanism and mechanical properties of polystyrene/silica nanocomposite in various silica contents", J. Mater. Sci., Vol. 46, pp. 5628-5638, 2011. crossref(new window)

13.
A. Masa, R. Saito, H. Saito, T. Sakai, A. Kaesaman, and N. Lopattananon, "Phenolic resin-crosslinked natural rubber/clay nanocomposites: Influence of clay loading and interfacial adhesion on strain-induced crystallization behavior", J. Appl. Polym. Sci., Vol. 133, pp. 43214, 2016.

14.
K. P. Sau, T. K. Chaki, and D. Khastgir, "Carbon fibre filled conductive composites based on nitrile rubber (NBR), ethylene propylene diene rubber (EPDM) and their blend", Polymer, Vol. 39, pp. 6461-6471, 1998. crossref(new window)

15.
G. K. White, "Thermal expansion of reference materials: copper, silica and silicon", J. Phys. D Appl. Phys., Vol. 6, pp. 2070-2078, 1973. crossref(new window)

16.
S. Choi, J. Park, E. Jeong, B. J. Kim, S. Y. Son, J. M. Lee, J. S. Lee, H. J. Jo, J. Park, and Y. C. Kang, "Deposition and XPS study of Pb, Zr, and Ti films", J. Chosun Natural Sci., Vol. 7, No. 3 pp. 183-187, 2014. crossref(new window)

17.
A. U. Alam, M. M. R. Howlader, and M. J. Deen, "Oxygen plasma and humidity dependent surface analysis of silicon, silicon dioxide and glass for direct wafer bonding", ECS J. Solid State Sc., Vol. 2, pp. P515-P523, 2013. crossref(new window)