Advanced SearchSearch Tips
Simulation of Debris Flow Deposit in Mt. Umyeon
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Simulation of Debris Flow Deposit in Mt. Umyeon
Won, Sangyeon; Kim, Gihong;
  PDF(new window)
Debris flow is a representative natural disaster in Korea and occurs frequently every year. Recently, it has caused considerable damage to property and considerable loss of life in both mountainous and urban regions. Therefore, It is necessary to estimate the scope of damage for a large area in order to predict the debris flow. A response model such as the random walk model(RWM) can be used as a useful tool instead of a physics-based numerical model. RWM is a probability model that simplifies both debris flows and sedimentation characteristics as a factor of slopes for a subjective site and represents a relatively simple calculation method compared to other debris flow behavior calculation models. Although RWM can be used to analyzing and predicting the scope of damage caused by a debris flow, input variables for terrain conditions are yet to be determined. In this study, optimal input variables were estimated using DEM generated from the Aerial Photograph and LiDAR data of Mt. Umyeon, Seoul, where a large-scale debris flow occurred in 2011. Further, the deposition volume resulting from the debris flow was predicted using the input variables for a specific area in which the deposition volume could not be calculated because of work restoration and the passage of time even though a debris flow occurred there. The accuracy of the model was verified by comparing the result of predicting the deposition volume in the debris flow with the result obtained from a debris flow behavior analysis model, Debris 2D.
Debris Flow;Random Walk Model;Aerial Photograph;DEM, LiDAR;
 Cited by
항공LiDAR 자료를 이용한 토석류 침식 및 퇴적모델 분석,원상연;김기홍;

한국지형공간정보학회지, 2016. vol.24. 3, pp.59-66 crossref(new window)
지상 LiDAR를 이용한 토석류 실험의 침식량 분석,원상연;이승우;백중철;윤찬영;김기홍;

한국측량학회지, 2016. vol.34. 3, pp.309-317 crossref(new window)
Analysis of Airborne LiDAR-Based Debris Flow Erosion and Deposit Model, Journal of Korean Society for Geospatial Information System, 2016, 24, 3, 59  crossref(new windwow)
Choi, H.T. (2001), Developing a Rainfall-Runoff Model for Forest Watersheds Using Distributed Hydrological Concept of TOPMODEL, Ph.D. dissertation, Seoul National University, Korea, 182p. (in Korean with English abstract)

Chun, K., Kim, M., Park, W., and Ezaki, T. (1997), Characteristics of channel bed and woody debris on mountainous stream, Journal of Korean Forest Society, Vol. 86, No. 1, pp. 69-79. (in Korean with English abstract)

Hirakawa, Y., Suwa, H., Fukuda, K., and Kobayashi, N. (2006), Application of PIV method for the measurement of surface velocity of debris flow, Journal of the Japan Society of Erosion Control Engineering, Vol. 59, No. 2, pp. 49-54.

Imamura, R. and Sugita, M. (1980), Study on simulation of debris depositing based on a random walk model, Journal of the Japan Society of Erosion Control Engineering, Vol. 32, No. 3, pp. 17-26.

Julien, P.Y. and Lan, Y. (1991), Rheology of hyperconcentrations, Journal of Hydraulic Engineering, Vol. 117, No. 3, pp. 346-353. crossref(new window)

Kim, D.M. (2015), Debris Flow Hazard Zone Analysis Using Random Walk Model, Master's thesis, Gangneung-Wonju National University, Gangwon, Korea, 63p. (in Korean with English abstract)

Kim, G., Won, S., and Mo, S. (2014), Umyeon mountain debris flow movement analysis using random walk model, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 32, No. 5, pp. 515-525. (in Korean with English abstract) crossref(new window)

Kim, N.K. (2011), A Study on Transport and Diffusion of Debris Flow with FLO-2D, Master's thesis, Kangwon National University, Korea, 58p. (in Korean with English abstract)

Kim, P.K. (2012), Numerical Modeling for the Detection and Movement of Debris Flow Using Detailed Soil Maps and GIS, Ph.D. dissertation, Kyungpook National University, Korea, 191p. (in Korean with English abstract)

Kim, S.E. (2013), Numerical Simulation of Drbris Flow in Mt. Umyeon Using FLO-2D Model, Master's thesis, Gangneung-Wonju National University, Korea, 92p. (in Korean with English abstract)

Ko, S.M., Lee, S.W., Yune, C.Y., and Kim, G. (2014), Topographic analysis of landslides in Umyeonsan, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 32, No. 1, pp. 55-62. (in Korean with English abstract) crossref(new window)

Koo, H.B. and Chae, B.G. (2013), The Damage Reduction Strategy for the Types of Landslide and Debris Flow, Land Transport and Maritime R&D Report, Korea Institute of Civil Engineering and Building Technology, Korea, pp. 1-262. (in Korean with English abstract)

Lee, C.W., Woo, C.S., and Youn, H.J. (2011), Analysis of debris flow hazard by the optimal parameters extraction of random walk model, Journal of Korean Forest Society, Vol. 100, No. 4, pp. 664-671. (in Korean with English abstract)

Lee, J.H. (2005), Management system for landslides hazard area using GIS, Journal of Korea Society Forest Engineering and Technology, Vol. 3, pp. 245-255. (in Korean with English abstract)

Lee, S.W., Kim, G.H., Yune, C.Y., Ryu, H.J., and Hong, S.J. (2012), Development of landslide-risk prediction model thorough database construction, Journal of the Korean Geotechnical Society, Vol. 28, No. 4, pp. 23-39. (in Korean with English abstract)

Lee, S.W., Lee, T.O., Jeon, C.G., Choi, C.R., and Yoo, N.J. (2013), Development of Mountain Road Alignment/Drainage Design and Disaster Prediction Map, Land Transport R&D Report, Korea Agency for Infrastructure Technology Advancement, Korea, pp. 1-228. (in Korean with English abstract)

Liu, K.F. and Huang, M.C. (2006), Numerical simulation of debris flow with application on hazard area mapping, Computational Geoscience, Vol. 10, No. 2, pp. 221-240. crossref(new window)

Liu, K.F., Li, H.C., and Hsu, Y.C. (2009), Debris flow hazard defense magnitude assessment with numerical simulation, Natural Hazards, Vol. 49, No. 1, pp. 137-161. crossref(new window)

Miyamoto, M. (2002), Two dimension numerical simulation of landslide mass movement, Journal of the Japan Society of Erosion Control Engineering, Vol. 55, No. 2, pp. 5-13.

O’Brien, J.S., Julien, P.Y., and Fullerton, W.T. (1993), Two dimensional water flood and mudflow simulation, Journal of Hydraulic Engineering, Vol. 119, No. 2, pp. 224-259.

Suzuki, T., Hotta, N., and Miyamoto, K. (2003), Influence of riverbed roughness on debris flows, Journal of the Japan Society of Erosion Control Engineering, Vol. 56, No. 2, pp. 5-13.

Tsai, M.P., Hsu, Y.C., Li, H.C., Shu, H.M., and Liu, K.F. (2011), Applications of simulation technique on debris flow hazard zone delineation: a case study in Daniao tribe, Eastern Taiwan, Natural Hazards and Earth System Sciences, Vol. 11, No. 11, pp. 3053-3062. crossref(new window)

Wu, Y.H. (2013), Debris 2D Tutorial, Department of Civil engineering National Taiwan University, Taiwan, 42p.