JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Boresight Calibration Comparison Using Geoid Models
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Boresight Calibration Comparison Using Geoid Models
So, Jae Kyeong; Park, Young Su; Won, Jae Ho; Yun, Hee Cheon;
  PDF(new window)
 Abstract
Direct georeferencing has become widespread in the field of digital aerial photogrammetry; as a result, the boresight calibration has become an essential component of the procedure to calculating exterior orientation parameters of aerial photographs accurately. During this procedure, a reference is used for the height of the geoid model, and the calibration results can appear different depending on the geoid model. The exterior orientation parameters calculated through direct georeferencing during boresight calibration may have varied values according to the corresponding geoid model. With that in mind, the effects of the geoid model on the boresight calibration were analyzed through three different cases. The geoid models used in the experiments were EGM96, EGM08, and KNGeoid14, and, through boresight calibration, the datum shift and boresight angle for each model was computed. After calculating the exterior orientation of each case, the GCP (Ground Control Point) was verified using the DPW (Digital Photogrammetry Workstation). In each case, results in the boresight calibration acquired through the geoid model demonstrated a difference in the Z datum, the exterior orientation heights Z, and the rotation Ω and Φ. After utilizing the DPW in each case and comparing it to the GCP, the difference in accuracy in accordance with the geoid model was found to be within 3cm, and it was concluded that the geoid model did not have a significant impact on boresight calibration.
 Keywords
Direct Georeferencing;Exterior Orientation;Boresight Calibration;Geoid Model;
 Language
Korean
 Cited by
 References
1.
Hahm, C. H. and Chang, H. J. (2009), 3D positioning accuracy estimation of DMC in compliance with introducing high resolution digital aerial camera, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 27, No. 1, pp. 743–750. (In Korean with English abstract)

2.
Lee, C. N. and Oh, J. H. (2012), A study on efficient self-calibration of a non-metric camera for close-range photogrammetry, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 30, No. 6, pp. 511–518. (In Korean with English abstract) crossref(new window)

3.
Lee, S. B., Kim, J. S., and Kim, C. Y. (2016), Evaluation of EGM2008 earth geopotential model using GPS/leveling data, Journal of Korean Spatial Information Society, Vol. 16, No. 3, pp. 117–126. (In Korean with English abstract)

4.
Lee, Y. W. (2014), Digital photogrammetry camera boresight calibration using ground control points, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 32, No. 4, pp. 293–298. (In Korean with English abstract) crossref(new window)

5.
Mostafa, M.M.R. (2001a), Boresight calibration of integrated inertial/camera systems, Proceeding of Int. Symposium on Kinematic Systems in Geodesy, Geomatics and Navigation – KIS 2001, June 5-8, Banff, Canada, pp. 440-445.

6.
Mostafa, M.M.R. (2001b), Digital multi-sensor systems – calibration and performance analysis, Proceeding of OEEPE Workshop, Integrated Sensor Orientation, Sept 17-18, Hannover, Germany.

7.
NGII (2016), Current geoid models of Korea, National Geographic Information Institute, Suwon, Korea, http://ngii.go.kr/geoid/intro/geoid_condition.do (last date accessed:25 May 2016). (in Korean)

8.
Park, B. K. (2011), An Analysis on EGM2008 Accuracy with GPS/Leveling, Master's thesis, Chungnam National University, Daejeon, Korea, 75p. (In Korean with English abstract)

9.
Seo, S. I., Won, J. H., Lee, J. O., and Park, B. U. (2012), Geometric calibration of digital photogrammetric camera in Sejong test-bed, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 30, No. 2, pp. 181–188. (In Korean with English abstract) crossref(new window)

10.
Won, J. H. (2013), Self-Calibration of Non-Metric Digital Camera Using Ground Control Points and Additional Parameters, Ph.D. dissertation, Chungnam National University, Daejeon, Korea, 101p. (In Korean with English abstract)

11.
Won, J. H., So, J. K., and Yun, H. C. (2012), Non-metric digital camera lens calibration using ground control points, Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography, Vol. 30, No. 2, pp. 173–180. (In Korean with English abstract) crossref(new window)

12.
Yoon, J. S. (2008), GPS/INS Aerotriangulation Using Interpolated CORS Observations, Ph.D. dissertation, Inha University, Incheon, Korea, 185p. (In Korean with English abstract)