Advanced SearchSearch Tips
Thermal Analysis and Optimization of 6.4 W Si-Based Multichip LED Packaged Module
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Thermal Analysis and Optimization of 6.4 W Si-Based Multichip LED Packaged Module
Chuluunbaatar, Zorigt; Kim, Nam Young;
  PDF(new window)
Multichip packaging was achieved the best solution to significantly reduce thermal resistance at the same time, to increase luminance intensity in LEDs packaging application. For the packaging, thermal spreading resistance is an important parameter to get influence the total thermal performance of LEDs. In this study, silicon-based multichip light emitting diodes (LEDs) packaged module has been examined for thermal characteristics in several parameters. Compared to the general conventional single LED packaged chip module, multichip LED packaged module has many advantages of low cost, low density, small size, and low thermal resistance. This analyzed module is comprised of multichip LED array, which consists of 32 LED packaged chips with supplement power of 0.2 W at every single chip. To realize the extent of thermal distribution, the computer-aided design model of 6.4 W Si-based multichip LED module was designed and was performed by the simulation basis of actual fabrication flow. The impact of thermal distribution is analyzed in alternative ways both optimizing numbers of fins and the thickness of that heatsink. In addition, a thermal resistance model was designed and derived from analytical theory. The optimum simulation results satisfies the expectations of the design goal and the measurement of IR camera results. tart after striking space key 2 times.
Light Emitting Diode;Silicon;Heatsink;Substrate;Thermal Resistance;
 Cited by
W-H. Chi, T-L. Chou, Ch-N. Han, S-Y. Yang, and K-N. Chiang "Analysis of thermal and luminous performance of MR-16 lighting module," IEEE Trans. Comp. Packag. Technol., vol. 33, no. 4 pp. 716-721, Dec. 2010.

J-H. Choi and M-W. Shin, "Thermal investigation of lighting module" Microelectron Reliab, vol. 52, pp. 830-835, 2012. crossref(new window)

H. Fengze, Y. Daoguo, and Z. Guoqi, "Thermal analysis of LED lighting system with different fin heat sinks," J. semiconductors, vol. 32, no. 1, Jan. 2011.

A. Christensen and S. Graham, "Thermal effects in packaging high power light emitting diode arrays" Appl. Therm. Eng., vol. 29, pp. 364-371, 2009. crossref(new window)

Y. Huaiyu, S. Koh, H-V. Zeijl, A. W. J. Gielen, and Z. Guoqi, "A review of passive thermal management of LED module," J. semiconductors, vol. 32, no. 1, Jan. 2011.

C. Wang, W.-S. Lee, F. Zhang, and N.-Y. Kim, "Si-based packaging platform for LED module using electroplating method," Elect. Lett., vol. 46, no. 17, pp. 1220-1221, Aug. 2010. crossref(new window)

S. K. Oh and E. B. Goldsmith, "The better manuscript preparation for speedy publication," J. Commun. Networks (JCN), vol. 13, no. 6, pp. 10-16, Dec. 2011.