Design and Analysis of UWB Circular Patch Antenna Using Microstrip Line

Title & Authors
Design and Analysis of UWB Circular Patch Antenna Using Microstrip Line
Kim, Jin-Ju; Kim, Sun-Woong; Park, Jung-Jin; Jeong, Min-A; Park, Kyung Woo; Choi, Dong-You;

Abstract
The proposed circular patch antenna was designed to include relative bandwidth of above 25% as designed by the FCC in the FCC in the 3.1 ~ 10.6 GHz band. The antenna was induced to have a wide band characteristic through two structures of the usual microstrip line and a microstrip line with a linear change in impedance. The proposed finally antenna was designed using an FR4_epoxy substrate with 4.7% permittivity, 0.02 of loss tangent, and 1.6 mm of thickness, and was simulated with the use of HFSS made by Ansys. Return loss at frequency, VSWR, radiation pattern and the gain of the antenna were analysed. As a result, if satisfied a return loss of -10 dB and $\small{VSWR{\leq}2}$ from 2.28 ~ 13.35 GHz, showing about the bandwidth of 11.89 GHz, and the radiation pattern was unidirectional in all bands. The antenna gain gradually increased from 2 ~ 8 GHz and had the highest gain of 7.92 dBi at 8 GHz. and the gain gradually decreased in the 9 ~ 12 GHz band.
Keywords
UWB;Circular pathc antenna;Microstrip line;
Language
Korean
Cited by
1.
자기상보 구조를 갖는 초광대역 다이폴 안테나,박원빈;권오헌;이성우;이종민;박영미;황금철;

한국통신학회논문지, 2016. vol.41. 11, pp.1414-1416
2.
지향성 특성을 갖는 UWB 용 테이퍼드 슬롯 안테나 분석,김선웅;최동유;

한국정보통신학회논문지, 2016. vol.20. 4, pp.691-697
1.
Analysis of Tapered Slot Antenna for UWB with Directivity Characteristic, Journal of the Korea Institute of Information and Communication Engineering, 2016, 20, 4, 691
References
1.
W. Zuang, X. Shan, and Q. Bi, "Ultra-wideband wireless communication," Wirel Commun. Mob. Comput., vol. 3, pp. 663-685, 2003.

2.
M. A. Peyrot-Solis, G. M. Galvan-Tejada, and H. Jardon-Agular, "A novel planar uwb monopole antenna formed on a printed circuit board," Microwave and Optical Technol. Lett., vol. 5, pp. 933-935, May 2006.

3.
S. Hong, K. Chung, J. Lee, S. Jung, S. S. Lee, and J. Choi, "Design of a diversity antenna with stubs for UWB application," Microwave and Optical Technology Lett., vol. 50, no. 50, pp. 1352-1356, Mar. 2008.

4.
K, H. Lee, E. H. Kwak, and B. G. Kim, "Effect of substrate thickness, perforation position and size on the bandwidth and radiation characteristics of a proximity coupled perforated microstrip patch antenna," J. KICS, vol. 39A, no. 6, pp. 301-321, Jun. 2014.

5.
D. Y. Choi, S. W. Kim, J. J. Park, M. A. Jeong, and S. R. Lee, "Design and Implementation of Tapered Slot Antenna for Ship's Indoor Location-Aware System," J. KICS, vol. 39C, no. 12, pp. 1307-1313, Dec. 2014.

6.
K. Y. Kim, "Design of UWB beam scanning antenna systems based on time domain analysis," Ph.D. Dissertation, Electronic Engineering, Kwangwoon Univ., Dec. 2013.

7.
K. J. Jeon, B. H. Ko, S. C. Myung, S. R. Lee, and K. S. Kim, "Protograph-based block LDPC code design for marine satellite communications," J. KICS, vol. 39C, no. 7, pp. 515-520, Jul. 2014.

8.
S. Shrestha, S. K. Noh, and D. Y. Choi, "Comparative study of antenna design for RF energy harvesting," Int. J. Ant. Propaga., vol. 2013, pp. 1-10, 2013.

9.
D. Y. Choi, Sika Shrestha, J. J. Park, and S. N. Noh, "Design and performance of an efficient rectenna incorporating a fractal structure," Int. J. Commun. Syst., vol. 2014, no. 27, pp. 1-19, Jul. 2014.

10.
K. Chang, RF and Microwave Wireless System, NY: WILEY, pp. 74-75, 2000.