JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Analysis of Two-Span Structures Constructed by Incremental Launching Method
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Analysis of Two-Span Structures Constructed by Incremental Launching Method
Kim, Sung Hoon; Kim, Bu Kyu; Choi, Jun Hyeok;
  PDF(new window)
 Abstract
This paper presents the structural analysis of two-span structures constructed by incremental launching method to traverse the existing facilities. The structure with a relatively short launching span can not be secure the structural stability caused by excessive deflection and overturning prior to reaching the maximum strength, because the length of the other span is different or the rear structure is not continuous. In order to estimate the stability of the construction stages of deflection and the overturning, the structural analysis was carried out. The parameters of the analysis is launching span ratio of the launching nose and the upper structure, weight ratio and so on. From the analysis result, the effects of parameters were investigated and a deflection formula of the launching nose and the condition of the overturning of structure were proposed.
 Keywords
Incremental lauching method;Overturning;Launching nose;Span ratio;Weight ratio;
 Language
Korean
 Cited by
 References
1.
Rosignoli, M. (1997) Influences of the Incremental Launching Construction Method on the Sizing of Prestressed Concrete Bridge Decks, Instn Civ. Engrs. Structs & Bldges, Vol.122, No.3, pp.316-325.

2.
Rosignoli, M. (1998) Nose Deck Interaction In Launched Prestressed Concrete Bridges, Bridge Engineering, Vol.3, No.1, pp.21-27. crossref(new window)

3.
Rosignoli, M. (1999) Presizing of Prestressed Concrete Launched Bridge, ACI Structural Journal, Vol.96, No.5 pp.705-710.

4.
이환우, 정두희, 안태욱(2006) 변단면 압출추진코와 ILM 교량 상부단면의 상호작용 해석, 한국전산구조공학회논문집, 한국전산구조공학회 제19권, 제2호, pp.139-142. Lee, H.W., Jung, D.H., and Ahn, T.W. (2006) Interaction Analysis Between Tapered Sectional Launching Nose and Superstructure Section of ILM Concrete Bridge, J. Comput. Struct. Eng. Inst. Koerea, COSEI, Vol.19, No.2, pp. 139-142 (in Korean).

5.
Shojaei, A., Tajmir, H. and Haji Akbara Fini, S. (2014) Analysis of incrementally Launched Bridges: A Parametric Matrix Based Study, International Journal of Bridge Engineering, Vol.2, No.1, pp.17-42.

6.
이환우, 장재엽(2010) 상부단면과의 상호작용을 고려한 ILM 교량용 압출추진코의 최적화 설계식, 한국전산구조공학회논문집, 한국전산구조공학회, 제23권, 제1호, pp. 53-60. Lee, H.W. and Jang, J.Y. (2010) Design Formula for Launching Nose of ILM Bridge Considering the Interaction Behavior with Superturecture Sections, J. Comput. Struct. Eng. Inst. Koerea, COSEIK, Vol.23, No.1, pp.53-60 (in Korean).

7.
최항용, 서석구, 오명석, 오세환, 김희성(2007) 이중합성 연속 박스거더교에 대한 가설공법별 발생 단면력 검토, 한국강구조학회논문집, 한국강구조학회, 제19권, 제6호, pp. 681-693. Choi, H.Y., Suh, S.K., Oh, M.S., Oh, S.H., and Kim, H.S. (2007) Temporary Stresses by Applying Construction Methods for Continuous Steel-Concrete Double Composite Box Girder Bridges, Journal of Korean Society of Steel Construction, KSSC, Vol.19, No.6, pp.681-693 (in Korean).

8.
최항용, 서석구, 오명석, 오세환(2008) 압출가설시 발생하는 휨모멘트의 최소화 조건을 통한 압출노즈의 최적설계, 대한토목학회논문집, 대한토목학회, 제28권, 제4A호, pp. 487-495. Choi, H.Y., Suh, S.K., Oh, M.S., and Oh, S.H. (2007) Techniques of Optimizing the Launching Nose under Conditions of Minimizing the Launching Bending Moment, Journal of the Korean Society of Civil Engineers, KSCE, Vol.28, No.4A, pp.487-495 (in Korean).