JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of block-type sidewalk pavement system using snow-melting system
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of block-type sidewalk pavement system using snow-melting system
Park, Kyungmo; Lee, Jeonguk; Kim, Changduk;
  PDF(new window)
 Abstract
Snow-melting system has been applied not only to roads for car traffic but also to pavement for the pedestrians safety reason in some of the developed countries such as USA and Canada based on countermeasures against Natural Disasters Act revised in 2000. Even though this system was introduced in korea in 2006 and has been partly applied to car traffic roads, there is few places that the system has been applied. Therefore, in this research a snow-melting system with a block-type to cover a pavement that efficiently transfers heat form heat rays to the top of a pavement and protects the heat rays. A quality check showed that compression and bending strength was improved approximately 5 times stronger and 7 to 10 times more absorption rate than the KS(Korea Industrial Standard) requirement. Moreover, only 10 minute was required to increase temperature above zero with a block-type snow-melting system whereas approximately 180 minute was spent with the existing system. This research is expected to contribute to environmental issues and reduce accidents on a slippery road.
 Keywords
Snow-melting;Block-type snow melting system;Environmental-friendly;Safety;
 Language
Korean
 Cited by
 References
1.
Baek, C., Tae, S., Lee, J., and Shin, S. (2011). "A Study in the Requisite Elements of LCCO2 Evaluation system at Planning Stage of Building." Korean Journal of Construction Engineering and Management, KICEM, 12(3), pp. 31-41.

2.
Hong, T., Jeong, K., and Ji, C. (2014). "Comparison of Environmental of Green and Traditional Buildings using Life Cycle Assessment." Korean Journal of Construction Engineering and Management, KICEM, 15(3), pp. 58-66.

3.
Ministry of Government Legislation (2014). Countermeasures against natural disasters act, (Aug. 15, 2015).

4.
Choi, T. I., and Hwang, K. I. (2012). "An Evaluation and Prediction of Performance of Road Snow-melting System Utilized by Ground Source Heat Pump." Journal of the Korea Solar Energy Society, 32(3), pp. 138-145. crossref(new window)

5.
Kim, J. H., Kim, J. H., and Lee, G. T. (2009). "Design of Road Snow Melting system Using Piping System." Korea Journal of Air-Conditioning and Refrigeration Engineering, pp. 1251-1256.

6.
Lee, C. W., and Seo, Y. K. (2012). "Snow melting system using Renewable Energy." Korean Journal of Construction Engineering and Management, KICEM, 13(3), pp. 34-37. crossref(new window)

7.
Wu, Y., Wan, C., and Wang, J. (2011). "Applicability of Highway snow-Melting Agents." ICTE 2011, pp. 2985-2990.

8.
Wu, Y. (2013). "Performance Comparison of Different Highway Snow-Melting Agents." ICTE 2013, pp. 590-595.

9.
Hossain, s., Fu, L., and Li, S. (2015). "Modeling the Snow Melting Performance of Salt: A Mechanistic Empirical Approach." Cold Regions Engineering 2015, pp. 464-475.